Rumble Strip Providers
Below is a list of providers of milled rumble strips. Please feel free to contact a provider in your area directly.
The United States Government does not endorse products or
manufacturers. Trademarks or manufacturers' names appear herein only because they are considered essential to the object of this document.
A-Annandale Jim Whitney P.O. Box 249 Dumfries, VA 22026 (703) 221-3113 FAX (703) 221-6226 E-Mail: aannandal@erols.com |
Rumble strips for transverse and longitudinal rumble strips with a reflective road line, they will show up at night in the rain. |
Flasher Companies Dean Stephens 2360 South 3270 West Salt Lake City, UT 84119 (800) 748-4443 (801) 972-4474 FAX (801) 972-0618 |
Milled-in rumble strips. |
Central Striping Service, Inc. 3489 Luyung Drive Rancho Cordova, CA 95742 (800) 759-6016 |
Ground-in various width and depths. We also provide a wide variety of striping services. |
Mark Rite Lines of Montana, Inc. Mike Ryan 1908 Main Street Billings, MT 59105 (406) 245-8710 FAX (406) 245-9641 Web Page: http://www.markritelines.com |
Contract services for milled rumble strips. We also provide transverse rumble strips and specialty grinding services. |
Pavement Marking Inc. Jim Elliot PO Box 50340 Phoenix, AZ 85076-0340 (602) 598-0872 FAX (602) 598-0873 Toll Free: (800) 284-0877 E-mail: jme@home.com |
We can provide various applications of ground in rumble strips, 6" to 18" width, various increments from one foot spacing on up. |
Price Striping Service Douglas Wakefield 1680 Elk Valley Road Crescent City, CA 95531 (707) 464-2857 FAX (707) 465-2857 E-Mail: ncol0049.telis@telis.org |
Milled-in rumble strips. |
San Bar Construction Corp. David "Hossie" Sanchez 100 Bosque Farms Blvd. Bosque Farms, NM 87068 (505) 869-5911 |
Milled-in rumble strips. |
Surface Preparation Technologies, Inc. Doug Johnson 81 Texaco Road Mechanicsburg, PA 17055 (717) 697-1450 FAX (717) 697-0813 Web Page: http://www.spt.addr.com |
Surface Preparation Technologies has cut nearly 15,000 miles of milled shoulder rumble strips throughout the United States since 1992. SPT also provides consulting services to highway authorities reviewing the use of shoulder rumble strips. |
Thomas Grinding, Inc. Mike Arendt P.O. Box 1083 Moore Haven, FL 33471 (863) 946-1461 FAX (863) 946-1448 Web Page: http://www.rumblestripmachines.com |
Milled-in rumble strips. |
Traffic Markings Inc. 4 Muster Drive Franklin, MA 02038 (508) 528-5727 FAX (508) 528-6273 |
Milled-in rumble strips. |
This page and its contents have been generously provided in partnership with The American Traffic Safety Services Association (ATSSA).