Home > Products > Residential Water Heaters > Solar Water Heaters > Solar Water Heaters — How It Works
Solar water heaters come in a wide variety of designs, all including a collector and storage tank, and all using the sun's thermal energy to heat water.
Solar water heaters are typically described according to the type of collector and the circulation system.
Batch collectors, also called Integrated Collector-Storage (ICS) systems, heat water in dark tanks or tubes within an insulated box, storing water until drawn. Water can remain in the collector for long periods of time if household demand is low, making it very hot. A tempering valve is your protection from scalding at the tap. The tempering valve mixes in cold water to decrease the water's temperature before it's delivered to the tap.
Batch collectors are incompatible with closed-loop circulation systems. Thus, they are generally not recommended for cold climates.
Flat-plate collectors typically consist of copper tubes fitted to flat absorber plates. The most common configuration is a series of parallel tubes connected at each end by two pipes, the inlet and outlet manifolds. The flat plate assembly is contained within an insulated box, and covered with tempered glass.
Flat plate collectors are typically sized to contain 40 gallons of water. Two collectors provide roughly half of the hot water needed to serve a family of four.
Evacuated tube collectors are the most efficient collectors available. Each evacuated tube is similar to a thermos in principle. A glass or metal tube containing the water or heat transfer fluid is surrounded by a larger glass tube. The space between them is a vacuum, so very little heat is lost from the fluid.
These collectors can even work well in overcast conditions and operate in temperatures as low as -40°F. Individual tubes are replaced as needed. Evacuated tube collectors can cost twice as much per square foot as flat plate collectors.