Jump to main content.


NCore Multipollutant Monitoring Network

NCore Network

NCore is a multi pollutant network that integrates several advanced measurement systems for particles, pollutant gases and meteorology. EPA is coordinating with its state, local and Tribal partners, who will operate the NCore sites, on a list of possible site locations. The following web pages contain information and pictures of monitoring stations included in the NCore network discussions. The EPA welcomes input on the appropriateness of these candidate sites. For more information you may look at the strategy reference documents.

Monitoring Objectives

The NCore Network addresses the following objectives:

Measurements

Parameter Comments
PM2.5 speciation Organic and elemental carbon, major ions and trace metals (24 hour average; every 3rd day)
PM2.5 FRM mass typically 24 hr. average every 3rd day
continuous PM2.5 mass 1 hour reporting interval for all cont. species
continuous PM(10-2.5) mass in anticipation of PM(10-2.5) standard
ozone (O3) all gases through cont. monitors (except HNO3 and NH3)
carbon monoxide (CO) capable of trace levels (low ppm and below) where needed
sulfur dioxide (SO2) capable of trace levels (low ppb and below) where needed
nitrogen oxide (NO) capable of trace levels (low ppb and below) where needed
total reactive nitrogen (NOy) capable of trace levels (low ppb and below) where needed
ammonia (NH3) currently under consideration
nitric acid (HNO3) currently under consideration
surface meteorology wind speed and direction, temperature, RH


Local Navigation


Jump to main content.