![]() |
Exhibit
1, 321 FW 1 Motor Vehicle/Equipment Operator Safety Training Requirements |
FWM#: 447 (Supersedes
Exhibit 1, 321 FW 1, 04/01/04, FWM 445)
Date: April 30, 2004
Series: Vehicle and Equipment
Management
Part 321: Motor Vehicle and Equipment Operator
Program
Originating Office: Division
of Contracting and Facilities Management
|
MOTOR VEHICLE/EQUIPMENT OPERATOR SAFETY TRAINING REQUIREMENTS
NOTE: Operation
of any type of motor vehicle or motor equipment is prohibited without the
safety training shown here, 321 FW 1, and other applicable Service policies
(e.g., 243 FW 1-5). All training must be properly documented for all employees
and volunteers.
Type of Vehicle or Equipment |
Operator
Categories |
Basic
Training |
Refresher
Training |
Motor
Vehicle: |
Full-time |
As needed
for State license. |
None unless
required by supervisor. |
Incidental |
As needed
for State license. |
None unless
required by supervisor. |
|
Commercial |
As needed
for commercial license. |
None unless
required by supervisor. |
|
Motor
Equipment: Heavy
Duty |
Full-time
|
3 hours
pre-class study 4 hours
classroom 1 hour operating
w/ instructor
|
Pending completion of course.
|
Incidental
|
3 hours
pre-class study 4 hours
classroom 1 hour operating
w/ instructor
|
Pending
completion of course.
|
|
Motor
Equipment: Light
Duty |
Full-time
|
3 hours
pre-class study 4 hours
classroom 1 hour operating
w/ instructor
|
1 hour pre-class
study 2 hours
classroom 1 hour operating
w/ instructor |
Incidental
|
3 hours
pre-class study 4 hours
classroom 1 hour operating
w/ instructor
|
1 hour pre-class
study 2 hours
classroom 1 hour operating
w/ instructor
|