Respiratory Protection
This informational booklet provides a generic, non-exhaustive overview of a particular topic related to OSHA standards. It does not alter or determine compliance responsibilities in OSHA standards or theOccupational Safety and Health Act of 1970. Because interpretations and enforcement policy may change over time, you should consult current administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the Courts for additional guidance on OSHA compliance requirements.
This publication is in the public domain and may be reproduced, fully or partially, without permission. Source credit is requested but not required.
This information is available to sensory impaired individuals upon request. Voice phone: (202) 693-1999; Teletypewriter (TTY) number: (877) 889-5627.
Respiratory Protection
U.S. Department of Labor
Elaine L. Chao, Secretary
Occupational Safety and Health Administration
John L. Henshaw, Assistant Secretary
OSHA 3079
2002 (Revised)
Contents
Respiratory Protection
What is a respirator?
Why do employees need respirators?
When do employees need to wear respirators?
How can you ensure proper protection?
Procedures to Ensure Proper Protection
How do you develop an effective respiratory protection program?
How do you choose the correct respirator?
What are specific respirator uses?
Who needs to be trained?
How do you make sure the respirators fit properly?
How do you inspect and take care of respirators?
Do you need to do medical evaluations?
How do you monitor work areas?
What equipment and air quality standards apply?
OSHA Assistance, Services, and Programs
How can OSHA help me?
How does safety and health management system assistance help employers and employees?
What are state programs?
What is consultation assistance?
What is the Safety and Health Achievement Recognition Program (SHARP)?
What are the Voluntary Protection Programs (VPPs)?
How can a partnership with OSHA improve worker safety and health?
What is OSHA's Strategic Partnership Program (OSPP)?
What occupational safety and health training does OSHA offer?
What is the OSHA Training Grant Program?
What other assistance materials does OSHA have available?
What do I do in case of an emergency or to file a complaint?
OSHA Regional and Area Office Directory
OSHA-Approved Safety and Health Plans
OSHA Consultation Projects
Respiratory Protection
What is a respirator?
A respirator is a protective device that covers the nose and mouth or the entire face or head to guard the wearer against hazardous atmospheres. Respirators may be:
- Tight-fitting - that is, half masks, which cover the mouth and nose and full facepieces that cover the face from the hairline to below the chin; or
- Loose-fitting, such as hoods or helmets that cover the head completely.
- In addition, there are two major classes of respirators:
- Air-purifying, which remove contaminants from the air; and
- Atmosphere-supplying, which provide clean, breathable air from an uncontaminated source. As a general rule, atmosphere-supplying respirators are used for more hazardous exposures.
Why do employees need respirators?
When employees must work in environments with insufficient oxygen or where harmful dusts, fogs, smokes, mists, fumes, gases, vapors, or sprays are present, they need respirators. These health hazards may cause cancer, lung impairment, other diseases, or death.
Where toxic substances are present in the workplace and engineering controls are inadequate to reduce or eliminate them, respirators are necessary. Some atmosphere-supplying respirators can also be used to protect against oxygen-deficient atmospheres. Increased breathing rates, accelerated heartbeat, and impaired thinking or coordination occur more quickly in an oxygen-deficient or other hazardous atmosphere. Even a momentary loss of coordination can be devastating if it occurs while a worker is performing a potentially dangerous activity such as climbing a ladder.
When do employees need to wear respirators?
Employees need to wear respirators whenever engineering and work practice control measures are not adequate to prevent atmospheric contamination at the worksite. Strategies for preventing atmospheric contamination may include enclosing or confining the contaminant-producing operation, exhausting the contaminant, or substituting with less toxic materials.
Respirators have their limitations and are not a substitute for effective engineering and work practice controls. When it is not possible to use these controls to reduce airborne contaminants below their occupational exposure levels, such as during certain maintenance and repair operations, emergencies, or when engineering controls are being installed, respirator use may be the best or only way to reduce worker exposure. In other cases, where work practices and engineering controls alone cannot reduce exposure levels to below the occupational exposure level, respirator use is essential.
Where respirators are required to protect worker health, specific procedures are necessary to ensure the equipment's effectiveness.
How can you ensure proper protection?
OSHA's respirator standard1 requires employers to establish and maintain an effective respiratory protection program when employees must wear respirators to protect against workplace hazards. Different hazards require different respirators, and employees are responsible for wearing the appropriate respirator and complying with the respiratory protection program.
The standard contains requirements for program administration, worksite-specific procedures, respirator selection, employee training, fit testing, medical evaluation, and respirator use, cleaning, maintenance, and repair.
Employees must use respirators while effective engineering controls, if they are feasible, are being installed. If engineering controls are not feasible, employers must provide respirators and employees must wear them when necessary to protect their health. The employee's equipment must be properly selected, used, and maintained for a particular work environment and contaminant. In addition, employers must train employees in all aspects of the respiratory protection program.
1 OSHA's regulations cover general, construction, and maritime industries. See Title 29 of the Code of Federal Regulations (CFR), Part 1910.134; and the Compressed Gas Association's Commodity Specification G-7-1989, also referenced in 29 CFR Part 1910.134.
Procedures to Ensure Proper Protection
How do you develop an effective respiratory protection program?
The primary objective of the respiratory protection program is to prevent exposure to air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, vapors, or sprays, and thus to prevent occupational illness.
A program administrator must be responsible for the program. This person must know enough about respirators to supervise the program properly.
Larger plants or companies with industrial hygiene, in-house medical department, safety engineering, or fire prevention departments should administer the program in liaison with the program administrator. In smaller plants without specialists, an upper-level superintendent, foreman, or qualified person must serve as program administrator.
Any respirator program should stress thorough training of all respirator users. Employees must be aware that a respirator does not eliminate the hazard. If the respirator fails, the user will be overexposed to dangerous substances. To reduce the possibility of failure, the respirator must fit properly and be maintained in a clean and serviceable condition.
Employers and employees must understand the respirator's purpose and limitations. Users must not alter or remove the respirator even for a short time, even if it is uncomfortable.
An effective respirator program must cover the following factors:
- Written worksite specific procedures;
- Program evaluation;
- Selection of an appropriate respirator approved by the National Institute for Occupational Safety and Health (NIOSH);
- Training;
- Fit testing;
- Inspection, cleaning, maintenance, and storage;
- Medical evaluations;
- Work area surveillance; and
- Air quality standards.
Whenever OSHA standards or employers require respirator use, there must be a complete respiratory protection program. Employers must have written operating procedures to ensure that employees use the respirators safely and properly. Users must be familiar with these procedures and with the respirators available and their limitations.
In workplaces with no hazardous exposures, but where workers choose to use respirators voluntarily, certain written program elements may be necessary to prevent potential hazards associated with respirator use. Employers must evaluate whether respirator use itself may actually harm employees. If so, employers must medically evaluate employees and, if necessary, restrict respirator use, as well as comply with program elements. Employers must inform employees voluntarily using respirators of basic information in Appendix D of OSHA's respiratory protection standard.
Employers must evaluate the effectiveness of a company's respirator program regularly and modify the written operating procedure as necessary to reflect the evaluation results. A labor-management team may be effective in conducting these periodic evaluations.
How do you choose the correct respirator?
Choosing the right equipment involves:
- Determining what the hazard is and its extent,
- Considering user factors that affect respirator performance and reliability, and
- Selecting an appropriate NIOSH-certified respirator.
Equipment must be used in line with specifications accompanying the NIOSH certification.
When selecting respirators, employers must consider the chemical and physical properties of the contaminant, as well as the toxicity and concentration of the hazardous material and the amount of oxygen present. Other selection factors are nature and extent of the hazard, work rate, area to be covered, mobility, work requirements and conditions, as well as the limitations and characteristics of the available respirators.
Air-purifying respirators use filters or sorbents to remove harmful substances from the air. They range from simple disposable masks to sophisticated devices. They do not supply oxygen and must not be used in oxygen-deficient atmospheres or in other atmospheres that are immediately dangerous to life or health (IDLH).
Atmosphere-supplying respirators are designed to provide breathable air from a clean air source other than the surrounding contaminated work atmosphere. They include supplied-air respirators (SARs) and self-contained breathing apparatus (SCBA) units.
The time needed to perform a given task, including the time necessary to enter and leave a contaminated area, is an important factor in determining the type of respiratory protection needed. For example, SCBAs, gas masks, or air-purifying chemical-cartridge respirators provide respiratory protection for relatively short periods. On the other hand, an atmosphere-supplying respirator that supplies breathable air from an air compressor through an air line can provide protection for extended periods.
If the total concentration of atmospheric particulates is low, particulate filter air-purifying respirators can provide protection for long periods without the need to replace the filter. Where there are higher concentrations of contaminants, however, an atmosphere-supplying respirator such as the positive-pressure SAR offers better protection for a longer period.
SARs eliminate the need for concern about filter breakthrough times, change schedules, or using end-ofservice-life indicators (ESLI) for airborne toxic materials, factors that must be considered when using air-purifying respirators.
Respirators must not impair the worker's ability to see, hear, communicate, and move as necessary to perform the job safely. For example, atmosphere-supplying respirators may restrict movement and present other potential hazards. SARs with their trailing hoses can limit the area the wearer can cover and may present a hazard if the hose comes into contact with machinery. Similarly, a SCBA that includes a back-mounted, compressed-air cylinder is both large and heavy. This may restrict climbing and movement in tight places, and the added weight of the air cylinder presents an additional burden to the wearer.
Another factor to consider when using respirators is the air-supply rate. The wearer's work rate determines the volume of air breathed per minute. The volume of air supplied to meet the breathing requirements is very significant when using atmosphere-supplying respirators such as self-contained and airline respirators that use cylinders because this volume determines their operating life.
The peak airflow rate also is important in the use of a constant-flow SAR. The air-supply rate should always be greater than the maximum amount of air being inhaled in order to maintain the respiratory enclosure under positive pressure.
Higher breathing resistance of air-purifying respirators under conditions of heavy work may causer the user breathing difficulty, particularly in hot, humid conditions. To avoid placing additional stress on the wearer, use the lightest respirator possible that presents the least breathing resistance.
SCBAs and some chemical canister respirators provide a warning of remaining service time. This may be a pressure gauge or timer with an audible alarm for SCBAs or a color ESLI on the cartridge or canister. The user should understand the operation and limitations of each type of warning device. For the many gas masks and chemical-cartridge respirators with no ESLI devices, the employer must establish and enforce a cartridge or canister change schedule. In addition, employees should begin each work shift with new canisters and cartridges.
What are specific respirator uses?
The following list presents a simplified version of characteristics and factors used for respirator selection. It does not specify the contaminant concentrations or particle size. Some OSHA substance-specific standards include more detailed information on respirator selection.
Hazard |
Respirator |
Immediately dangerous to life or health (IDLH) 2 |
Oxygen deficiency
Gas, vapor contaminants and other highly toxic air contaminants |
Full-facepiece, pressure-demand SCBA certified for a minimum service life of 30 minutes. A combination full-facepiece, pressure-demand SAR with an auxiliary self-contained air supply. |
Contaminated atmospheres - for escape |
Positive-pressure SCBA. Gas mask. Combination positive-pressure SAR with escape SCBA. |
Not immediately dangerous to life or health |
Gas and vapor contaminants |
Positive-pressure SAR. Gas mask. Chemical-cartridge or canister respirator. |
Particulate contaminants |
Positive-pressure SAR including abrasive blasting respirator. Powered air-purifying respirator equipped with high-efficiency filters. Any air-purifying respirator with a specific particulate filter. |
Gaseous and particulate contaminants |
Positive-pressure supplied respirator. Gas mask. Chemical-cartridge respirator with mechanical filters. |
Smoke and other fire-related contaminants |
Positive-pressure SCBA. |
2 “Immediately dangerous to life or health” (IDLH) means an atmosphere that poses an immediate threat to life, would cause irreversible adverse health effects, or would impair an individual's ability to escape from a dangerous atmosphere.
Who needs to be trained?
Training is essential for correct respirator use. Employers must teach supervisors and workers how to properly select, use, and maintain respirators. All employees required to use respiratory protective equipment must receive instruction in the proper use of the equipment and its limitations. Employers should develop training programs based on the employee's education level and language background.
Training must be comprehensive enough for the employee to demonstrate a knowledge of the limitations and capabilities of the respirator, why the respirator is necessary, and how improper fit, usage, or maintenance can compromise the respirator.
Training must include an explanation of the following:
- Why respirator use is necessary;
- Nature of the respiratory hazard and consequences of not fitting, using, and maintaining the respirator properly;
- Reason(s) for selecting a particular type of respirator;
- Capabilities and limitations of the selected respirator;
- How to inspect, put on and remove, and check the seals of the respirator;
- Respirator maintenance and storage requirements;
- How to use the respirator effectively in emergency situations, including when the respirator malfunctions; and
- How to recognize medical signs and symptoms that may limit or prevent the effective use of the respirator.
Users should know that improper respirator use or maintenance may cause overexposure. They also should understand that continued use of poorly fitted and maintained respirators can cause chronic disease or death from overexposure to air contaminants.
How do you make sure the respirators fit properly?
Different types of respirators and even different brands of the same type of respirator have different fit characteristics. No one respirator will fit everyone. Some employees may be unable to get an adequate fit with certain respirator models of a particular type of respirator. This is why employers must provide a sufficient number of respirator models and sizes to ensure that every employee can select an acceptable respirator that fits properly.
Corrective eyeglasses worn by employees also present a problem when fitting respirators. Special mountings are available to hold corrective lenses inside full facepieces. A qualified individual must fit the facepiece and lenses to provide good vision, comfort, and proper sealing.
Tight-fitting respirators cannot provide proper protection without a tight seal between the facepiece and the wearer's face. Consequently, beards and other facial hair, the absence of normally worn dentures, facial deformities, or jewelry or head gear that projects under the facepiece seal can also seriously affect the fit of a facepiece. To ensure proper respiratory protection, check the facepiece each time you wear the respirator. You can do this by performing either a positive-pressure or negative-pressure user seal check. Detailed instructions for performing these user seal checks are in Appendix B-1 of the OSHA respiratory protection standard.
Fit testing is required for tight-fitting facepiece respirators. You can test the effectiveness of the fit of the facepiece two ways: qualitatively and quantitatively.
Qualitative fit testing involves the introduction of a harmless odoriferous or irritating substance into the breathing zone around the respirator being worn. If no odor or irritation is detected by the wearer, this indicates a proper fit.
Quantitative fit testing offers more accurate, detailed information on respirator fit. While the wearer performs exercises that could induce facepiece leakage, a fit testing instrument numerically measures the amount of leakage into the respirator. This testing can be done either by generating a test aerosol as a test atmosphere, using ambient aerosol as a test agent, or using controlled negative pressure to measure any leakage. Detailed instructions for performing qualitative and quantitative fit testing is contained in Appendix A of the OSHA respiratory protection standard.
How do you inspect and take care of respirators?
It is important to inspect all respirators for wear and tear before and after each use, giving special attention to rubber or plastic parts that can deteriorate or lose pliability. The facepiece, headband, valves, connecting tube, fittings, and cartridges, canisters or filters must be in good condition. A respirator inspection must include checking the tightness of the connections.
Users must inspect SCBAs at least monthly and ensure that air and oxygen cylinders are fully charged according to the manufacturer's instructions. The inspection should include a check of regulator and warning devices to ensure their proper function. Employers must keep records of inspection dates and findings.
Users should replace chemical cartridges and gas mask canisters as necessary to provide complete protection, following the manufacturer's recommendations. In addition, they should replace mechanical filters as necessary to avoid high resistance to breathing.
Only an experienced person is permitted to make repairs, using parts specifically designed for the respirator. This person must consult the manufacturer's instructions for any repair and no attempt should be made to repair or replace components or make adjustments or repairs beyond the manufacturer's recommendations.
The employer must ensure that respirators are cleaned and disinfected as often as necessary to keep them sanitary. In addition, the employer must ensure that emergency-use respirators are cleaned and disinfected immediately after each use.
Respirators should be washed in a detergent solution and then disinfected by immersing them in a sanitizing solution. Cleaner-sanitizers that effectively clean the respirator and contain a bactericidal agent are available commercially. The bactericidal agent frequently used is a quaternary ammonium compound. Strong cleaning and sanitizing agents and many solvents can damage rubber or plastic respirator parts. Use these materials with caution or after consultation with the respirator manufacturer.
Users must store respirators in a way that protects them against dust, sunlight, heat, extreme cold, excessive moisture, and damaging chemicals. When packed or stored, each respirator should be positioned to retain its natural configuration. Facepieces and exhalation valves should rest in a normal position to prevent the rubber or plastic from deforming.
Do you need to do medical evaluations?
Workers assigned to tasks that require respirator use must be physically able to perform the work while using the respirator. The local physician or licensed health care professional (LHCP) will determine what health and physical conditions are pertinent.
The medical evaluation can be performed by a physician or other LHCP by using a medical questionnaire or by a medical examination that provides the same information as the questionnaire provided in Appendix C of the OSHA standard. This evaluation must be done before the employee is fit tested and uses the respirator in the workplace. The employer must obtain a written recommendation from the LHCP for each employee's ability to wear a respirator. Additional medical evaluations must be provided whenever health-care professionals deem them appropriate.
How do you monitor work areas?
Employers must maintain surveillance of the work area conditions and the degree of worker exposure or stress - a combination of work rate, environmental conditions, and physiological burdens of wearing a respirator. Changes in operating procedures, temperature, air movement, humidity, and work practices may influence the concentration of a substance in the work area atmosphere. Employers must periodically monitor these factors as they affect air contaminant concentrations. In instances where work is of such short duration that it takes longer to do the test than the job, reasonable estimates of exposure are allowable.
In situations where the environment is or may be immediately dangerous to life or health, employers must ensure that one or more employees are located outside the dangerous environment. These employees must maintain visual, voice, or signal line communication with employees in the IDLH atmosphere.
In interior structural firefighting situations, employers must ensure that at least two employees enter the structure and remain in visual or voice contact with one another at all times. Also, at least two employees must be located outside the fire area to provide effective emergency rescue. All workers engaged in interior structural firefighting must use SCBA.
What equipment and air quality standards apply?
Respiratory protective devices must be approved by NIOSH for the contaminant or situation to which the employee is exposed.
Compressed air, compressed oxygen, liquid air, and liquid oxygen used for respiration must be of high purity. Oxygen must meet the requirements of the United States Pharmacopoeia for medical or breathable oxygen. Breathing air must meet at least the requirement for Grade D breathing air described in Compressed Gas Association (CGA) Commodity Specification G-7.1-1989. Compressed oxygen must not be used in open circuit SCBAs or SARs that have previously used compressed air. Oxygen concentrations greater than
23.5 percent must not be used with airline respirators unless the equipment is designed for oxygen service.
Employers must supply breathing air to respirators from cylinders or air compressors. For testing cylinders, see “Shipping Container Specifications of the Department of Transportation,” 49 CFR Part 178.
Employers must mark containers of breathing gas clearly and in accordance with NIOSH requirements, as described in 42 CFR Part 84. Further details on the sources of compressed air and its safe use can be found in the CGA pamphlet G-7.1-1989.
The compressor for supplying air must have the necessary safety devices and alarms. Compressors must be constructed and situated to prevent contaminated air from entering the air supply system and be equipped with suitable in-line, air-purifying sorbent beds and filters installed to ensure breathing air quality. If using an oil-lubricated compressor, ensure that it has a high-temperature or carbon monoxide alarm or both. If using only the high-temperature alarm, the employer must test the air from the compressor frequently for carbon monoxide.
Air-line couplings must be incompatible with outlets for other gas systems to prevent accidental servicing of air-line respirators with non-breathable gases or oxygen.
OSHA Assistance, Services, and Programs
How can OSHA help me?
OSHA can provide extensive help through a variety of programs, including assistance about safety and health programs, state plans, workplace consultations, voluntary protection programs, strategic partnerships, alliances, and training and education. An overall commitment to workplace safety and health can add value to your business, to your workplace, and to your life.
How does safety and health management system assistance help employers and employees?
Working in a safe and healthful environment can stimulate innovation and creativity and result in increased performance and higher productivity. The key to a safe and healthful work environment is a comprehensive safety and health management system.
OSHA has an electronic compliance assistance tool, or eTools, on its website that “walks” users through the steps required to develop a comprehensive safety and health program. The eTools are posted at www.osha.gov, and are based on guidelines that identify four general elements critical to a successful safety and health management system:
- Management leadership and employee involvement,
- Worksite analysis,
- Hazard prevention and control, and
- Safety and health training.
What are state programs?
The Occupational Safety and Health Act of 1970 (OSH Act) encourages states to develop and operate their own job safety and health plans. OSHA approves and monitors these plans and funds up to 50 percent of each program's operating costs. State plans must provide standards and enforcement programs, as well as voluntary compliance activities, that are at least as effective as Federal OSHA's.
Currently, 26 states and territories have their own plans. Twenty-three cover both private and public (state and local government) employees and three states, Connecticut, New Jersey, and New York, cover only the public sector. For more information on state plans, see the list at the end of this publication, or visit OSHA's website at www.osha.gov.
What is consultation assistance?
Consultation assistance is available on request to employers who want help establishing and maintaining a safe and healthful workplace. Funded largely by OSHA, the service is provided at no cost to small employers and is delivered by state authorities through professional safety and health consultants.
What is the Safety and Health Achievement Recognition Program (SHARP)?
Under the consultation program, certain exemplary employers may request participation in OSHA's Safety and Health Achievement Recognition Program (SHARP). Eligibility for participation includes, but is not limited to, receiving a full-service, comprehensive consultation visit, correcting all identified hazards, and developing an effective safety and health program management program.
Employers accepted into SHARP may receive an exemption from programmed inspections (not complaint or accident investigation inspections) for 1 year initially, or 2 years upon renewal. For more information about consultation assistance, see the list of consultation projects at the end of this publication.
What are the Voluntary Protection Programs (VPPs)?
Voluntary Protection Programs are designed to recognize outstanding achievements by companies that have developed and implemented effective safety and health management programs. There are three levels of VPPs: Star, Merit, and Demonstration. All are designed to achieve the following goals:
- Recognize employers that have successfully developed and implemented effective and comprehensive safety and health management programs;
- Encourage these employers to continuously improve their safety and health management programs;
- Motivate other employers to achieve excellent safety and health results in the same outstanding way; and
- Establish a cooperative relationship between employers, employees, and OSHA.
VPP participation can bring many benefits to employers and employees, including fewer worker fatalities, injuries, and illnesses; lost-workday case rates generally 50 percent below industry averages; and lower workers' compensation and other injury- and illness-related costs. In addition, many VPP sites report improved employee motivation to work safely, leading to a better quality of life at work; positive community recognition and interaction; further improvement and revitalization of already-good safety and health programs; and a positive relationship with OSHA.
After a site applies for the program, OSHA reviews an employer's VPP application and conducts a VPP onsite evaluation to verify that the site's safety and health management programs are operating effectively. OSHA conducts onsite evaluations on a regular basis, annually for participants at the demonstration level, every 18 months for Merit, and every 3 to 5 years for Star. Once a year, all participants must send a copy of their most recent annual internal evaluation to their OSHA regional office. This evaluation must include the worksite's record of injuries and illnesses for the past year.
Sites participating in VPP are not scheduled for regular, programmed inspections. OSHA does, however, handle any employee complaints, serious accidents, or significant chemical releases that may occur at VPP sites according to routine enforcement procedures.
Additional information on VPP is available from OSHA national, regional, and area offices listed at the end of this booklet. Also, see “Cooperative Programs” on OSHA's website.
How can a partnership with OSHA improve worker safety and health?
OSHA has learned firsthand that voluntary, cooperative partnerships with employers, employees, and unions can be a useful alternative to traditional enforcement and an effective way to reduce worker deaths, injuries, and illnesses. This is especially true when a partnership leads to the development and implementation of a comprehensive workplace safety and health management program.
What is OSHA's Strategic Partnership Program (OSPP)?
OSHA Strategic Partnerships are agreements among labor, management, and government to improve workplace safety and health. These partnerships encourage, assist, and recognize the efforts of the partners to eliminate serious workplace hazards and achieve a high level of worker safety and health. Whereas OSHA's Consultation Program and VPP entail one-on-one relationships between OSHA and individual worksites, most strategic partnerships build cooperative relationships with groups of employers and employees.
There are two major types of OSPPs. Comprehensive partnerships focus on establishing comprehensive safety and health management systems at partnering worksites. Limited partnerships help identify and eliminate hazards associated with worker deaths, injuries, and illnesses, or have goals other than establishing comprehensive worksite safety and health programs.
For more information about this program, contact your nearest OSHA office or visit the agency's website.
What occupational safety and health training does OSHA offer?
The OSHA Training Institute in Arlington Heights, IL, provides basic and advanced training and education in safety and health for federal and state compliance officers, state consultants, other federal agency personnel, and private-sector employers, employees, and their representatives.
What is the OSHA Training Grant Program?
OSHA awards grants to nonprofit organizations to provide safety and health training and education to employers and workers in the workplace. Grants often focus on high risk activities or hazards or may help nonprofit organizations in training, education, and outreach.
OSHA expects each grantee to develop a program that addresses a safety and health topic named by OSHA, recruit workers and employers for the training, and conduct the training. Grantees are also expected to follow up with students to find out how they applied the training in their workplaces.
For more information contact OSHA Office of Training and Education, 2020 Arlington Heights Road, Arlington Heights, IL 60005; or call (847) 297-4810.
What other assistance materials does OSHA have available?
OSHA has a variety of materials and tools on its website at www.osha.gov. These include eTools such as Expert Advisors and Electronic Compliance Assistance Tools, information on specific health and safety topics, regulations, directives, publications, videos, and other information for employers and employees.
OSHA also has an extensive publications program. For a list of free or sales items, visit OSHA's website at www.osha.gov or contact the OSHA Publications Office,
U.S. Department of Labor, 200 Constitution Avenue, NW, N-3101, Washington, DC 20210. Telephone (202) 693-1888 or fax to (202) 693-2498.
In addition, OSHA's CD-ROM includes standards, interpretations, directives, and more. It is available for sale from the U.S. Government Printing Office. To order, write to the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, or phone (202) 512-1800.
What do I do in case of an emergency or to file a complaint?
To report an emergency, file a complaint, or seek OSHA advice, assistance, or products, call (800) 321-OSHA or contact your nearest OSHA regional, area, state plan, or consultation office listed at the end of this publication. The teletypewriter (TTY) number is (877) 889-5627.
Employees can also file a complaint online and get more information on OSHA federal and state programs by visiting OSHA's website at www.osha.gov.
OSHA Regional and Area Office Directory
OSHA Regional Offices
Region I
(CT,* MA, ME, NH, RI, VT*)
JFK Federal Building, Room E340
Boston, MA 02203
(617) 565-9860
Region II
(NJ,* NY,* PR,* VI*)
201 Varick Street, Room 670
New York, NY 10014
(212) 337-2378
Region III
(DE, DC, MD,* PA,* VA,* WV)
The Curtis Center
170 S. Independence Mall West
Suite 740 West
Philadelphia, PA 19106-3309
(215) 861-4900
Region IV
(AL, FL, GA, KY,* MS, NC,* SC,* TN*)
SNAF
61 Forsyth Street SW, Room 6T50
Atlanta, GA 30303
(404) 562-2300
Region V
(IL, IN,* MI,* MN,* OH, WI)
230 South Dearborn Street,
Room 3244
Chicago, IL 60604
(312) 353-2220
Region VI
(AR, LA, NM,* OK, TX)
525 Griffin Street, Room 602
Dallas, TX 75202
(214) 767-4731 or 4736 x224
Region VII (IA,* KS, MO, NE)
City Center Square
1100 Main Street, Suite 800
Kansas City, MO 64105
(816) 426-5861
Region VIII
(CO, MT, ND, SD, UT,* WY*)
1999 Broadway, Suite 1690
PO Box 46550
Denver, CO 80202-5716
(303) 844-1600
Region IX
(American Samoa, AZ,* CA,* HI, NV,* Northern Mariana Islands)
71 Stevenson Street, Room 420
San Francisco, CA 94105
(415) 975-4310
Region X
(AK,* ID, OR,* WA*)
1111 Third Avenue, Suite 715
Seattle, WA 98101-3212
(206) 553-5930
*These states and territories operate their own OSHA-approved job safety and health programs. The Connecticut, New Jersey, and New York plans cover public employees only. States with approved programs must have a standard that is identical to, or at least as effective as, the federal standard.
OSHA Area Offices
Anchorage, AK
(907) 271-5152
Birmingham, AL
(205) 731-1534
Mobile, AL
(251) 441-6131
Little Rock, AR
(501) 324-6291/5818
Phoenix, AZ
(602) 640-2348
Sacramento, CA
(916) 566-7471
San Diego, CA
(415) 975-4310
Denver, CO
(303) 844-5285
Greenwood Village, CO
(303) 843-4500
Bridgeport, CT
(203) 579-5581
Hartford, CT
(860) 240-3152
Wilmington, DE
(302) 573-6518
Fort Lauderdale, FL
(954) 424-0242
Jacksonville, FL
(904) 232-2895
Tampa, FL
(813) 626-1177
Savannah, GA
(912) 652-4393
Smyrna, GA
(770) 984-8700
Tucker, GA
(770) 493-6644/6742/8419
Des Moines, IA
(515) 284-4794
Boise, ID
(208) 321-2960
Calumet City, IL
(708) 891-3800
Des Plaines, IL
(847) 803-4800
Fairview Heights, IL
(618) 632-8612
North Aurora, IL
(630) 896-8700
Peoria, IL
(309) 671-7033
Indianapolis, IN
(317) 226-7290
Wichita, KS
(316) 269-6644
Frankfort, KY
(502) 227-7024
Baton Rouge, LA
(225) 389-0474/0431)
Braintree, MA
(617) 565-6924
Methuen, MA
(617) 565-8110
Springfield, MA
(413) 785-0123
Linthicum, MD
(410) 865-2055/2056
Bangor, ME
(207) 941-8177
Portland, ME
(207) 780-3178
Lansing, MI
(517) 327-0904
Minneapolis, MN
(612) 664-5460
Kansas City, MO
(816) 483-9531
St. Louis, MO
(314) 425-4249
Jackson, MS
(601) 965-4606
Billings, MT
(406) 247-7494
Raleigh, NC
(919) 856-4770
Bismark, ND
(701) 250-4521
Omaha, NE
(402) 221-3182
Concord, NH
(603) 225-1629
Avenel, NJ
(732) 750-3270
Hasbrouck Heights, NJ
(201) 288-1700
Marlton, NJ
(856) 757-5181
Parsippany, NJ
(973) 263-1003
Carson City, NV
(775) 885-6963
Albany, NY
(518) 464-4338
Bayside, NY
(718) 279-9060
Bowmansville, NY
(716) 684-3891
New York, NY
(212) 337-2636
North Syracuse, NY
(315) 451-0808
Tarrytown, NY
(914) 524-7510
Westbury, NY
(516) 334-3344
Cincinnati, OH
(513) 841-4132
Cleveland, OH
(216) 522-3818
Columbus, OH
(614) 469-5582
Toledo, OH
(419) 259-7542
Oklahoma City, OK
(405) 278-9560
Portland, OR
(503) 326-2251
Allentown, PA
(610) 776-0592
Erie, PA
(814) 833-5758
Harrisburg, PA
(717) 782-3902
Philadelphia, PA
(215) 597-4955
Pittsburgh, PA
(412) 395-4903
Wilkes-Barre, PA
(570) 826-6538
Guaynabo, PR
(787) 277-1560
Providence, RI
(401) 528-4669
Columbia, SC
(803) 765-5904
Nashville, TN
(615) 781-5423
Austin, TX
(512) 916-5783 (5788)
Corpus Christi, TX
(361) 888-3420
Dallas, TX
(214) 320-2400 (2558)
El Paso, TX
(915) 534-6251
Fort Worth, TX
(817) 428-2470
(817) 485-7647
Houston, TX
(281) 591-2438 (2787)
Houston, TX
(281) 286-0583/0584 (5922)
Lubbock, TX
(806) 472-7681 (7685)
Salt Lake City, UT
(801) 530-6901
Norfolk, VA
(757) 441-3820
Bellevue, WA
(206) 553-7520
Appleton, WI
(920) 734-4521
Eau Claire, WI
(715) 832-9019
Madison, WI
(608) 264-5388
Milwaukee, WI
(414) 297-3315
Charleston, WV
(304) 347-5937
OSHA-Approved Safety and Health Plans
Alaska Department of Labor and Workforce Development
Commissioner
(907) 465-2700 FAX: (907) 465-2784
Program Director
(907) 269-4904 FAX: (907) 269-4915
Industrial Commission of Arizona
Director, ICA
(602) 542-4411 FAX: (602) 542-1614
Program Director
(602) 542-5795 FAX: (602) 542-1614
California Department of Industrial Relations
Director
(415) 703-5050 FAX: (415) 703-5114
Chief
(415) 703-5100 FAX: (415) 703-5114
Manager, Cal/OSHA Program Office
(415) 703-5177 FAX: (415) 703-5114
Connecticut Department of Labor
Commissioner
(860) 566-5123 FAX: (860) 566-1520
Conn-OSHA Director
(860) 566-4550 FAX: (860) 566-6916
Hawaii Department of Labor and Industrial Relations
Director
(808) 586-8844 FAX: (808) 586-9099
Administrator
(808) 586-9116 FAX: (808) 586-9104
Indiana Department of Labor
Commissioner
(317) 232-2378 FAX: (317) 233-3790
Deputy Commissioner
(317) 232-3325 FAX: (317) 233-3790
Iowa Division of Labor
Commissioner
(515) 281-6432 FAX: (515) 281-4698
Administrator
(515) 281-3469 FAX: (515) 281-7995
Kentucky Labor Cabinet
Secretary
(502) 564-3070 FAX: (502) 564-5387
Federal/State Coordinator
(502) 564-3070, x240 FAX: (502) 564-1682
Maryland Division of Labor and Industry
Commissioner
(410) 767-2999 FAX: (410) 767-2300
Deputy Commissioner
(410) 767-2992 FAX: 767-2003
Assistant Commissioner, MOSH
(410) 767-2215 FAX: 767-2003
Michigan Department of Consumer and Industry Services
Director
(517) 322-1814 FAX: (517) 322-1775
Minnesota Department of Labor and Industry
Commissioner
(651) 296-2342
FAX: (651) 282-5405
Assistant Commissioner
(651) 296-6529
FAX: (651) 282-5293
Administrative Director, OSHA Management Team
(651) 282-5772 FAX: (651) 297-2527
Nevada Division of Industrial Relations
Administrator
(775) 687-3032
FAX: (775) 687-6305
Chief Administrative Officer
(702) 486-9044
FAX: (702) 990-0358
[Las Vegas (702) 687-5240]
New Jersey Department of Labor
Commissioner
(609) 292-2975
FAX: (609) 633-9271
Assistant Commissioner
(609) 292-2313
FAX: (609) 292-1314
Program Director, PEOSH
(609) 292-3923 FAX: (609) 292-4409
New Mexico Environment Department
Secretary
(505) 827-2850 FAX: (505) 827-2836
Chief
(505) 827-4230 FAX: (505) 827-4422
New York Department of Labor
Acting Commissioner
(518) 457-2741
FAX: (518) 457-6908
Division Director
(518) 457-3518 FAX: (518) 457-6908
North Carolina Department of Labor
Commissioner (919) 807-2900
FAX: (919) 807-2855
Deputy Commissioner, OSH Director
(919) 807-2861 FAX: (919) 807-2855
OSH Assistant Director
(919) 807-2863 FAX: (919) 807-2856
Oregon Occupational Safety and Health Division
Administrator
(503) 378-3272 FAX: (503) 947-7461
Deputy Administrator for Policy
(503) 378-3272 FAX: (503) 947-7461
Deputy Administrator for Operations
(503) 378-3272 FAX: (503) 947-7461
Puerto Rico Department of Labor and Human Resources
Secretary
(787) 754-2119 FAX: (787) 753-9550
Assistant Secretary for Occupational Safety and Health
(787) 756-1100/1106, 754-2171 FAX: (787) 767-6051
Deputy Director for Occupational Safety and Health
(787) 756-1100, 1106/754-2188 FAX: (787) 767-6051
South Carolina Department of Labor, Licensing, and Regulation
Director
(803) 896-4300 FAX: (803) 896-4393
Program Director
(803) 734-9644 FAX: (803) 734-9772
Tennessee Department of Labor Commissioner
(615) 741-2582 FAX: (615) 741-5078
Acting Program Director
(615) 741-2793 FAX: (615) 741-3325
Utah Labor Commission Commissioner
(801) 530-6901 FAX: (801) 530-7906
Administrator
(801) 530-6898 FAX: (801) 530-6390
Vermont Department of Labor and Industry
Commissioner
(802) 828-2288 FAX: (802) 828-2748
Project Manager
(802) 828-2765 FAX: (802) 828-2195
Virgin Islands Department of Labor
Acting Commissioner
(340) 773-1990 FAX: (340) 773-1858
Program Director
(340) 772-1315 FAX: (340) 772-4323
Virginia Department of Labor and Industry
Commissioner
(804) 786-2377 FAX: (804) 371-6524
Director, Office of Legal Support
(804) 786-9873 FAX: (804) 786-8418
Washington Department of Labor and Industries
Director
(360) 902-4200 FAX: (360) 902-4202
Assistant Director [PO Box 44600]
(360) 902-5495 FAX: (360) 902-5529
Program Manager, Federal-State Operations
(360) 902-5430 FAX: (360) 902-5529
Wyoming Department of Employment
Safety Administrator
(307) 777-7786 FAX: (307) 777-3646
OSHA Consultation Projects
Anchorage, AK
(907) 269-4957
Tuscaloosa, AL
(205) 348-3033
Little Rock, AR
(501) 682-4522
Phoenix, AZ
(602) 542-1695
Sacramento, CA
(916) 263-2856
Fort Collins, CO
(970) 491-6151
Wethersfield, CT
(860) 566-4550
Washington, DC
(202) 541-3727
Wilmington, DE
(302) 761-8219
Tampa, FL
(813) 974-9962
Atlanta, GA
(404) 894-2643
Tiyam, GU
9-1-(671) 475-1101
Honolulu, HI
(808) 586-9100
Des Moines, IA
(515) 281-7629
Boise, ID
(208) 426-3283
Chicago, IL
(312) 814-2337
Indianapolis, IN
(317) 232-2688
Topeka, KS
(785) 296-2251
Frankfort, KY
(502) 564-6895
Baton Rouge, LA
(225) 342-9601
West Newton, MA
(617) 727-3982
Laurel, MD
(410) 880-4970
Augusta, ME
(207) 624-6400
Lansing, MI
(517) 322-1809
Saint Paul, MN
(651) 284-5060
Jefferson City, MO
(573) 751-3403
Pearl, MS
(601) 939-2047
Helena, MT
(406) 444-6418
Raleigh, NC
(919) 807-2905
Bismarck, ND
(701) 328-5188
Lincoln, NE
(402) 471-4717
Concord, NH
(603) 271-2024
Trenton, NJ
(609) 292-3923
Santa Fe, NM
(505) 827-4230
Albany, NY
(518) 457-2238
Henderson, NV
(702) 486-9140
Columbus, OH
(614) 644-2631
Oklahoma City, OK
(405) 528-1500
Salem, OR
(503) 378-3272
Indiana, PA
(724) 357-2396
Hato Rey, PR
(787) 754-2171
Providence, RI
(401) 222-2438
Columbia, SC
(803) 734-9614
Brookings, SD
(605) 688-4101
Nashville, TN
(615) 741-7036
Austin, TX
(512) 804-4640
Salt Lake City, UT
(801) 530-6901
Montpelier, VT
(802) 828-2765
Richmond, VA
(804) 786-6359
Christiansted St. Croix, VI
(809) 772-1315
Olympia, WA
(360) 902-5638
Madison, WI
(608) 266-9383
Waukesha, WI
(262) 523-3044
Charleston, WV
(304) 558-7890
Cheyenne, WY
(307) 777-7786
|
|