|
There
are four basic types of press brakes:
These metalworking machines form parts
through the use of dies attached to a plate type ram or slide
and a plate-type bed. They are mechanically or
hydraulically powered and are primarily used for bending and
forming sheet metal. Metalworking occurs by placing stock on a
bottom die and striking it with a top die attached to the
movable ram. |
Powered press brake
|
Operator Involvement
The operator will select and install the dies, place and
position the stock between the dies, activate the press cycle with palm
buttons or a foot switch, and remove the completed part. These
machines are normally used for prototype and semi-production
processes where maximum operator involvement is required, creating
many operational hazards.
Additional
Safety Measures |
Potential Hazards:
-
Power transmission components should be totally
enclosed.
-
The work area should be neat with non-slip floor
preparation.
|
|
Safeguarded press brake
|
|
|
|
|