![OSHA Fact Sheet](https://webarchive.library.unt.edu/eot2008/20090508010313im_/http://www.osha.gov/Publications/images/fact_sheet_logo.jpg)
Marine Terminal Fall Protection for Personnel Platforms
In marine terminals, personnel platforms attached to the container spreader of a container handling gantry crane are commonly used to transport workers, equipment and tools to and from container ships. The longshoremen then perform various tasks onboard the ship, such as disconnecting the twistlocks that hold cargo containers together, attaching and removing lashing equipment that secure the stacks of containers on the ship, and handling other problems that may arise. During the transport of longshoremen to and from container ships, the hazard of falling is a major concern for employers, ship owners, and the longshoremen.
General Precautions
Employers are required to ensure that employees use a personal fall protection system while working on top of a vessel’s containers (see 29 CFR 1918.85(j)). However, employers are not required to ensure that employees use the personal fall protection system while riding in a personnel platform. However, OSHA standards 29 CFR 1917.45(j) and 1918.66(c) provide safety requirements and procedures for longshoring employees who are being hoisted.
Personnel Platform Recommendations
To better protect employees, OSHA recommends that employers and employees implement the following safety precautions to ensure the safety of workers being transported on personnel platforms:
- Install anchorage points in personnel platforms and ensure that all workers who are being hoisted use a personal fall protection system that meets the requirements of 29 CFR 1918.85(k)(6).
- Place anchorage points away from the entry point of the platform and ensure that the anchorage point does not interfere with the movement of personnel on the platform while the lift is in progress.
![Entry point of the platform](https://webarchive.library.unt.edu/eot2008/20090508010313im_/http://www.osha.gov/images/personnel_platforms_02.jpg)
- Store tools and equipment safely so that they do not create a tripping or projectile hazard (see 29 CFR 1917.11(a) and 1918.91(a)).
- Require foremen and gang bosses to use the same fall protection methods as other employees.
- Coordinate and discuss the lift operation, the proper use of personal fall protection systems, and other safety issues with all personnel involved including:
Crane operator(s);
Person(s) being lifted;
Person in charge of the operation and;
Signal person(s).
Lifts should be coordinated with pre-lift meetings or pre-shift gang meetings. Crane operators should be included in the meeting by radio if they are already in the crane.
![Personnel platform with half gate](https://webarchive.library.unt.edu/eot2008/20090508010313im_/http://www.osha.gov/images/personnel_platforms_04.jpg)
Personnel platform with half gate
Access Openings
OSHA standards require that personnel platforms be equipped with an access opening fitted with a means of closure (see 29 CFR 1917.45(j)(8)). OSHA recommends that employers use personnel platforms equipped with a full gate system meeting the requirements of 29 CFR 1917.45(j)(1)(iii)(A). The gate should swing inward, be self-closing, and use a positive locking mechanism. If a chain closure is used, OSHA recommends that employers instruct their employees to stand away from the opening while being hoisted.
![Personnel platform with locking gate](https://webarchive.library.unt.edu/eot2008/20090508010313im_/http://www.osha.gov/images/personnel_platforms_03.jpg)
Personnel platform with locking gate
This is one in a series of informational fact sheets highlighting OSHA programs, policies or standards. It does not impose any new compliance requirements. For a comprehensive list of compliance requirements of OSHA standards or regulations, refer to title 29 of the Code of Federal Regulations. This information will be made available to sensory impaired individuals upon request. The voice phone is (202) 693-1999; teletypewriter (TTY) number (877) 889-5627.
For more complete information:
![OSHA](https://webarchive.library.unt.edu/eot2008/20090508010313im_/http://www.osha.gov/images/logo-120x35.gif) |
Occupational
Safety and Health
Administration |
U.S. Department of Labor
www.osha.gov
(800) 321-OSHA
|