2008 Schedule B - Chapter 76
Section XV - Chapter 76
Aluminum and Articles Thereof
Note
1. In this chapter the following expressions have the meanings hereby assigned to them:
(a). Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid
cross section along their whole length in the shape of circles, ovals, rectangles
(including squares), equilateral triangles or regular convex polygons (including
"flattened circles" and "modified rectangles", of which two opposite sides are convex
arcs, the other two sides being straight, of equal length and parallel). Products with
a rectangular (including square), triangular or polygonal cross section may have
corners rounded along their whole length. The thickness of such products which
have a rectangular (including "modified rectangular") cross section exceeds
one-tenth of the width. The expression also covers cast or sintered products, of the
same forms and dimensions, which have been subsequently worked after production
(otherwise than by simple trimming or descaling), provided that they have not
thereby assumed the character of articles or products of other headings.
(b). Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross
section along their whole length, which do not conform to any of the definitions of
bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers
cast or sintered products, of the same forms, which have been subsequently worked
after production (otherwise than by simple trimming or descaling), provided that they
have not thereby assumed the character of articles or products of other headings.
(c). Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross
section along their whole length in the shape of circles, ovals, rectangles (including
squares), equilateral triangles or regular convex polygons (including "flattened
circles" and "modified rectangles", of which two opposite sides are convex arcs, the
other two sides being straight, of equal length and parallel). Products with a
rectangular (including square), triangular or polygonal cross section may have
corners rounded along their whole length. The thickness of such products which
have a rectangular (including "modified rectangular") cross section exceeds
one-tenth of the width.
(d). Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7601), coiled
or not, of solid rectangular (other than square) cross section with or without rounded
corners (including "modified rectangles" of which two opposite sides are convex arcs,
the other two sides being straight, of equal length and parallel) of a uniform
thickness, which are:
- of rectangular (including square) shape with a thickness not exceeding one-tenth
of the width,
- of a shape other than rectangular or square of any size, provided that they do not
assume the character of articles or products of other headings.
Headings 7606 and 7607 apply, inter alia, to plates, sheets, strip and foil with
patterns (for example, grooves, ribs, checkers, tears, buttons, lozenges) and to such
products which have been perforated, corrugated, polished or coated, provided that
they do not thereby assume the character of articles or products of other headings.
(e). Tubes and pipes
Hollow products, coiled or not, which have a uniform cross section with only one
enclosed void along their whole length in the shape of circles, ovals, rectangles
(including squares), equilateral triangles or regular convex polygons, and which have
a uniform wall thickness. Products with a rectangular (including square), equilateral
triangular or regular convex polygonal cross section, which may have corners
rounded along their whole length, are also to be considered as tubes and pipes
provided the inner and outer cross sections are concentric and have the same form
and orientation. Tubes and pipes of the foregoing cross sections may be polished,
coated, bent, threaded, drilled, wasted, expanded, cone-shaped or fitted with
flanges, collars or rings.
Subheading Notes
1. In this chapter the following expressions have the meanings hereby assigned to them:
(a). Aluminum, not alloyed
Metal containing by weight at least 99 percent of aluminum, provided that the
content by weight of any other element does not exceed the limit specified in the
following table:
Table - Other elements
Element Limiting content percent by weight
Fe + Si (Iron plus Silicon) 1.0
Other elements (1), each 0.1 (2)
(1). Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.
(2). Copper is permitted in a proportion greater than 0.1 percent
but not more than 0.2 percent, provided that neither the
chromium nor manganese content exceeds 0.05 percent.
(b). Aluminum alloys
Metallic substances in which aluminum predominates by weight over each of the
other elements provided that:
(i). The content by weight of at least one of the other elements or of iron plus
silicon taken together is greater than the limit specified in the foregoing
table; or
(ii). The total content by weight of such other elements exceeds 1 percent.
2. Notwithstanding the provisions of note 1(c), for the purposes of subheading 7616.91 the
term "wire" applies only to products, whether or not in coils, of any cross-sectional
shape, of which no cross-sectional dimension exceeds 6 mm.
Statistical Note
1. For the purposes of this chapter, the term "aluminum vanadium master alloy" refers to
aluminum alloys which contain by weight 20 percent or more of vanadium.
7601 Unwrought aluminum:
7601100000 Aluminum, not alloyed . . . . . . . . . . . .kg
760120 Aluminum alloys:
7601209030 Aluminum vanadium master alloy . . . . . .kg
Other:
7601209045 Of uniform circular cross section throughout its
length, not in coils . . . . . . . . . .kg
Other:
7601209075 Remelt scrap ingot . . . . . . . . .kg
7601209500 Other . . . . . . . . . . . . . . . .kg
7602 Aluminum waste and scrap:
7602000030 Used beverage container scrap . . . . . . . .kg
7602000090 Other . . . . . . . . . . . . . . . . . . . .kg
7603 Aluminum powders and flakes:
7603100000 Powders of nonlamellar structure . . . . . .kg
7603200000 Powders of lamellar structure; flakes . . . .kg
7604 Aluminum bars, rods and profiles:
760410 Of aluminum, not alloyed:
7604101000 Profiles . . . . . . . . . . . . . . . . .kg
Bars and rods:
Having a round cross section:
7604103010 With an outside diameter of less than 10 mm
(0.39 inch) . . . . . . . . . . . . .kg
7604103050 With an outside diameter of 10 mm (0.39 inch)
or more . . . . . . . . . . . . . . .kg
Other:
7604105030 With a maximum cross sectional dimension of
less than 10 mm (0.39 inch) . . . . .kg
7604105060 With a maximum cross sectional dimension of
10 mm (0.39 inch) or more . . . . . .kg
Of aluminum alloys:
7604210000 Hollow profiles . . . . . . . . . . . . .kg
760429 Other:
7604291000 Other profiles . . . . . . . . . . . . .kg
Bars and rods:
Having a round cross section:
7604293010 With an outside diameter of less than 10 mm
(0.39 inch) . . . . . . . . . . . .kg
7604293050 With an outside diameter of 10 mm (0.39 inch)
or more . . . . . . . . . . . . . .kg
Other:
7604295030 With a maximum cross-sectional dimension of
less than 10 mm (0.39 inch) . . . .kg
7604295060 With a maximum cross-sectional dimension of
10 mm (0.39 inch or more . . . . .kg
7605 Aluminum wire:
Of aluminum, not alloyed:
760511 Of which the maximum cross-sectional dimension
exceeds 7 mm (0.276 inch):
7605110030 Of which the maximum cross-sectional dimension
exceeds 9.5 mm (0.374 inch) . . . . . .kg
7605110090 Other . . . . . . . . . . . . . . . . .kg
7605190000 Other . . . . . . . . . . . . . . . . . .kg
Of aluminum alloys:
760521 Of which the maximum cross-sectional dimension
exceeds 7 mm (0.276 inch):
7605210030 Of which the maximum cross-sectional dimension
exceeds 9.5 mm (0.374 inch) . . . . . .kg
7605210090 Other . . . . . . . . . . . . . . . . .kg
7605290000 Other . . . . . . . . . . . . . . . . . .kg
7606 Aluminum plates, sheets and strip, of a thickness exceeding
0.2 mm (0.0079 inch):
Rectangular (including square):
760611 Of aluminum, not alloyed:
Not clad:
7606113030 More than 6.3 mm (0.248 inch) in thickness kg
7606113060 6.3 mm (0.248 inch) or less in thickness kg
7606116000 Clad . . . . . . . . . . . . . . . . . .kg
760612 Of aluminum alloys:
Not clad:
7606123030 More than 6.3 mm (0.248 inch) in thickness kg
7606123070 6.3 mm (0.248 inch) or less in thickness kg
7606126000 Clad . . . . . . . . . . . . . . . . . .kg
Other:
760691 Of aluminum, not alloyed:
More than 6.3 mm (0.248 inch) in thickness:
7606910010 Circles and discs . . . . . . . . . .kg
7606910050 Other . . . . . . . . . . . . . . . .kg
6.3 mm (0.248 inch) or less in thickness:
7606910070 Circles and discs . . . . . . . . . .kg
7606910090 Other . . . . . . . . . . . . . . . .kg
760692 Of aluminum alloys:
More than 6.3 mm (0.248 inch) in thickness:
7606920010 Circles and discs . . . . . . . . . .kg
7606920050 Other . . . . . . . . . . . . . . . .kg
6.3 mm (0.248 inch) or less in thickness:
7606920070 Circles and discs . . . . . . . . . .kg
7606920090 Other . . . . . . . . . . . . . . . .kg
7607 Aluminum foil (whether or not printed or backed with paper,
paperboard, plastics or similar backing materials) of a thickness
(excluding any backing) not exceeding 0.2 mm (0.0079 inch):
Not backed:
760711 Rolled but not further worked:
Of a thickness not exceeding 0.15 mm (0.0059 inch):
7607113000 Of a thickness not exceeding 0.01 mm
(0.00039 inch) . . . . . . . . . . .kg
7607116000 Of a thickness exceeding 0.01 mm
(0.00039 inch) . . . . . . . . . . .kg
7607119000 Other . . . . . . . . . . . . . . . . .kg
7607190000 Other . . . . . . . . . . . . . . . . . .kg
7607200000 Backed . . . . . . . . . . . . . . . . . . .kg
7608 Aluminum tubes and pipes:
760810 Of aluminum, not alloyed:
7608100030 Seamless . . . . . . . . . . . . . . . . .kg
7608100090 Other . . . . . . . . . . . . . . . . . .kg
760820 Of aluminum alloys:
7608200030 Seamless . . . . . . . . . . . . . . . . .kg
7608200090 Other . . . . . . . . . . . . . . . . . .kg
7609000000 Aluminum tube or pipe fittings (for example, couplings, elbows,
sleeves) . . . . . . . . . . . . . . . . . . . . . . . . . .kg
7610 Aluminum structures (excluding prefabricated buildings of
heading 9406) and parts of structures (for example, bridges and
bridge-sections, towers, lattice masts, roofs, roofing frameworks,
doors and windows and their frames and thresholds for doors,
balustrades, pillars and columns); aluminum plates, rods,
profiles, tubes and the like, prepared for use in structures:
7610100000 Doors, windows and their frames and thresholds for doors kg
761090 Other:
7610900020 Sheet-metal roofing, siding, flooring, and roof guttering
and other drainage equipment . . . . . . .kg
7610900040 Architectural and ornamental work . . . .kg
7610900050 Other . . . . . . . . . . . . . . . . . .kg
7611 Aluminum reservoirs, tanks, vats and similar containers, for any
material (other than compressed or liquefied gas), of a capacity
exceeding 300 liters (79.3 gallons), whether or not lined or heat
insulated, but not fitted with mechanical or thermal equipment:
7611000030 Tanks . . . . . . . . . . . . . . . . . . . .No.
7611000090 Other . . . . . . . . . . . . . . . . . . . .No.
7612 Aluminum casks, drums, cans, boxes and similar containers
(including rigid or collapsible tubular containers), for any
material (other than compressed or liquefied gas), of a capacity
not exceeding 300 liters (79.3 gallons), whether or not lined or
insulated, but not fitted with mechanical or thermal equipment:
7612100000 Collapsible tubular containers . . . . . . .No.
761290 Other:
7612901030 Cans of a capacity not exceeding 355 ml (12 oz.) No.
7612901060 Cans of a capacity exceeding 355 ml (12 oz.) but less
than 3.8 liters (1gallon) . . . . . . . .No.
7612909000 Other . . . . . . . . . . . . . . . . . .No.
7613000000 Aluminum containers for compressed or liquefied gas No.
7614 Stranded wire, cables, plaited bands and the like, including
slings and similar articles of aluminum, not electrically insulated:
7614100000 With steel core . . . . . . . . . . . . . . .kg
761490 Other:
7614901000 Not fitted with fittings and not made up into articles kg
7614905000 Fitted with fittings, or made up into articles kg
7615 Table, kitchen or other household articles and parts thereof, of
aluminum; pot scourers and scouring or polishing pads, gloves
and the like, of aluminum; sanitary ware and parts thereof, of
aluminum:
Table, kitchen or other household articles and parts thereof;
pot scourers and scouring or polishing pads, gloves and the
like:
7615110000 Pot scourers and scouring or polishing pads, gloves and
the like . . . . . . . . . . . . . . . . .kg
761519 Other:
7615192000 Cooking and kitchenware, cast . . . . .No.
7615194000 Cooking and kitchenware, other . . . . .No.
7615199000 Other . . . . . . . . . . . . . . . . .kg
7615200000 Sanitary ware and parts thereof . . . . . . .kg
7616 Other articles of aluminum:
761610 Nails, tacks, staples (other than those of heading 8305),
screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins,
washers and similar articles:
7616101000 Nails, tacks, and staples . . . . . . . .kg
7616103000 Rivets . . . . . . . . . . . . . . . . . .kg
7616105000 Cotters and cotter-pins . . . . . . . . .kg
Other:
7616106000 Threaded fasteners . . . . . . . . . . .kg
7616108000 Other . . . . . . . . . . . . . . . . .kg
Other:
7616910000 Cloth, grill, netting and fencing, of aluminum wire kg
761699 Other:
7616995030 Ladders . . . . . . . . . . . . . . . .No.
7616995040 Venetian blinds and parts thereof . . . X
7616995050 Hangers and supports for pipes and tubes kg
7616995060 Castings . . . . . . . . . . . . . . . .kg
7616995070 Forgings . . . . . . . . . . . . . . . .kg
Other:
7616995080 Other articles of wire . . . . . . . .kg
7616995095 Other . . . . . . . . . . . . . . . .kg
|
|