Home > Products > Lighting > CFLs > Learn About CFLs

Learn About CFLs

How do CFLs work?

CFLs produce light differently than incandescent bulbs. In an incandescent, electric current runs through a wire filament and heats the filament until it starts to glow. In a CFL, an electric current is driven through a tube containing argon and a small amount of mercury vapor. This generates invisible ultraviolet light that excites a fluorescent coating (called phosphor) on the inside of the tube, which then emits visible light.

CFLs need a little more energy when they are first turned on, but once the electricity starts moving, use about 75 percent less energy than incandescent bulbs. A CFL’s ballast helps "kick start" the CFL and then regulates the current once the electricity starts flowing.

Older CFLs used large and heavy magnetic ballasts that caused a buzzing noise in some bulbs. Most CFLs today — and all ENERGY STAR qualified CFLs — use electronic ballasts, which do not buzz or hum.

Back to top

How do I get the most from my CFLs?

Photo of CFL being screwed into a lamp

Do the twist.

Screw in your CFL by holding the ballast (the white plastic part), NOT the glass tubing.
Photo of a light switch being flipped

Don’t flip too fast.

You’ll maximize the lifetime savings and effectiveness of your CFLs by keeping them on for 15 minutes or more at a time.
Photo of a CFL installed in a 3-way fixture

Choose 3 for 3.

Only use bulbs labeled as three-way on three-way sockets.
Photo of a dimmer switch

Don’t dim a non-dimmable.

Only use bulbs labeled as dimmable on dimmer switches.
Photo of an electric timer

Check your controls.

Most photocells, motion sensors and electric timers are not designed to work with CFLs. Always check with the manufacturer of the control for compatibility.
Photo of a CFL being installed in a recessed can fixture

Give them air.

CFLs are sensitive to extreme temperatures, so place your CFLs in open fixtures indoors. Using them in enclosed fixtures indoors can create a hot environment that reduces the lifetime of your bulbs. Note that covered reflectors are best used in recessed cans.
Photo of a CFL installed in an outdoor open fixture

Protect them outside.

Protect bulbs from the elements by placing them inside enclosed fixtures outdoors. For colder climates, look at the packaging for optimal operating temperatures.


Learn more about how to get the most out of your CFLs.

Back to top