Evaluation of Substitute Materials for Silica Sand in Abrasive Blasting
Contract No. 200-95-2946

Primary contact
Mark Greskevitch, Project Officer
National Institute for Occupational Safety and Health
1095 Willowdale Road, MS PB-233
Morgantown, WV 26505-2888
(304) 285-6305
email: mfg1@cdc.gov

Report prepared by:
KTA-Tator, Inc.
115 Technology Drive
Pittsburgh, PA 15275-1085
(412) 788-1300

Contract Specialist
Geraldine Puskar
National Institute for Occupational Safety and Health
Pittsburgh Research Laboratory
626 Cochrans Mill Road
Pittsburgh, PA 15236


Note: To view the sections of this report that are in PDF format you will need the free Adobe Acrobat Reader.
Adobe Acrobat Reader

Phase 1 (Laboratory Investigations): September 1998

Report  (pdf, 315K)
Appendices
1. Study Design - Protocol  (pdf, 35K)
2. Supplier Comments and Concerns
3. Substrate Test Panel Certification
4. Letter to Suppliers  (pdf, 13K)
5. Sample Inspection Reports  (pdf, 195K)
6. Process Control Charts and Statistical Analysis  (pdf, 15K)
7. Break Down Chamber - Drawing
8. Blast Cleaning Booth Drawing/Operating Conditions  (pdf, 16K)
Drawing of the blasting cleaning booth
9. Journal of Protective Coatings and Lingings Article "Achieving Productivity From Abrasive Blast Cleaning Systems"
A. Tables of Abrasive Performance   (pdf, 40K)
B. Tables of Industrial Hygiene Data
Descriptions of the Health Hazards  (pdf, 39K)
Air Sample Results  (pdf, 433K)
Air Sample Data Analysis  (pdf, 106K)
Bulk Elemental Analysis  (pdf, 76K)
Comparison of Airborne Concentrations to Bulk Concentrations  (pdf, 86K)
C. Graphs of Statistical Attributes  (pdf, 12K)
D. Cost Calculation Table  (pdf, 9K)
E. Photographs
Report Tables  (pdf, 30K)
Report Figures  (pdf, 76K)

Phase 2 (Field Investigations): December 1998

Report  (pdf, 181K)
Appendices
1. Study Design - Protocol  (pdf, 25K)
2. Containment Drawings/Blast Run Conditions and Productivity Data  (pdf, 291K)

3. Sample Inspection Reports  (pdf, 121K)

4. Sample Pre- and Post- Medical Report Forms
A. Tables of Abrasive Performance  (pdf, 15K)
B. Tables of Industrial Hygiene Data
Appendix B Glossary  (pdf, 5K)
Descriptions of the Health Hazards  (pdf, 38K)
Air and Bulk Element Analysis  (pdf, 161K)
C. Graphs of Statistical Attributes  (pdf, 11K)
D. Cost Calculation Tables  (pdf, 10K)
E. Photographs
Report Tables  (pdf, 21K)
Report Figures  (pdf, 46K)

Phase 3 (Comparison of Lab and Field Investigations): March 1999

Report  (pdf, 101K)

Appendices
1. Descriptions of the Health Hazards and Recommended Exposure Limits for the Eleven Health Related Agents  (pdf, 25K)
Report Tables  (pdf, 138K)
Report Figures  (pdf, 19K)

 


Hard copies of this report may be purchased from the National Technical Information Service (NTIS).  You may contact them by calling toll free (800) 553-6847 or by calling the commercial number (703) 605-6000.

Phase 1: NTIS # PB99-105553.  Approximate cost $98, not including $5 shipping and handling.

Phase 2: NTIS # PB99-140964.  Approximate cost $54, not including $5 shipping and handling.

Phase 3: NTIS # PB99-140972.  Approximate cost $29.50, not including $5 shipping and handling.