Search NIOSH | NIOSH Home | NIOSH Topics | Site Index | Databases and Information Resources | NIOSH Products | Contact Us |
NIOSH Publication No. 2009-123:Reducing Hazardous Dust in Enclosed Operator Cabs During Construction |
April 2009 |
|
SummaryConstruction workers may be exposed to hazardous dust containing silica when working in enclosed cabs during construction activities. The National Institute for Occupational Safety and Health (NIOSH) found that equipment operator exposure could be reduced by retrofitting air pressurization and filtration systems on existing cabs, using sweeping compounds on soiled floors, and implementing a dust control program. Description of ExposureBreathing dust that contains crystalline silica can lead to silicosis, a deadly lung disease. No effective treatment exists for silicosis, but it can be prevented by controlling workers’ exposure to dust containing crystalline silica. Exposure to crystalline silica has also been linked to lung cancer, kidney disease, reduced lung function, and other disorders [NIOSH 2002]. Many tasks in construction may generate dust containing crystalline silica: grinding or cutting concrete, tuckpointing masonry, using a jackhammer to break concrete, or using mobile excavation equipment (e.g., drills, loaders, graders, dozers, and trucks). Operator cabs used in the construction industry are meant to protect the equipment operator from excessive dust and noise. When the equipment is new, the controls on the cab are normally able to reduce dust exposures to an acceptable level (see Figure 1). However, as the equipment ages, many components of the control systems deteriorate (e.g., seals) and may cause the operator to be exposed to hazardous levels of dust. A study on an older enclosed cab used at surface coal mine noted respirable dust in the cab almost 13 times the NIOSH recommended exposure level (REL) [Cecala et al. 2004]. NIOSH StudiesNIOSH has conducted studies of mining in the United States in cooperation with the Mine Safety and Health Administration (MSHA), mine operators, and equipment manufacturers to find the most cost-effective ways to reduce operator exposure to dust in enclosed cabs [NIOSH 2008]. Engineering controls and work practices identified in these studies relate directly to mobile excavation equipment used in the construction industry. Therefore, NIOSH recommends that the same controls and work practices be used in mobile equipment for heavy construction. The main sources of dust in an enclosed cab are from airborne dust at the worksite that leaks into a cab that is poorly sealed and from the material tracked into the cab by the operator. The two most important factors to achieve low dust concentrations in enclosed cabs were the use of an efficient air filtration system and an effectively sealed (tight) cab for positive inside cab pressurization.
ControlsNIOSH and its partners have developed recommendations to help protect workers from exposure to crystalline silica dust during construction activities [Cecala et al. 2001; Cecala et al. 2005; NIOSH 1996; NIOSH 2001; NIOSH 2002]. The following guidelines for controlling hazardous dust when using enclosed cabs during construction activities are based on those recommendations. Site Set-Up
Engineering Controls
Personal Hygiene and Protective Clothing
Respiratory ProtectionThe dust control cited in this report may greatly reduce worker exposure to hazardous dust; however, respirators may still be necessary to reduce exposure to crystalline silica below the NIOSH REL of 50µg/m3. Follow the Occupational Safety and Health Administration (OSHA) Respiratory Protection Standard (29 CFR* 1910.134) (www.osha.gov/SLTC/etools/respiratory/index.html). The provisions of the program include procedures for selection, medical evaluation, fit testing, training, use and care of respirators. AcknowledgmentsThe principal contributors to this publication were Andrew Cecala and John Organiscak of the Pittsburgh Research Laboratory, National Institute for Occupational Safety and Health. John Whalen under a contract with the U.S. Public Health Service, Division of Federal Occupational Health served as writer/editor. ReferencesCecala AB, Organiscak JA, Heitbrink WA [2001]. Dust underfoot: enclosed cab floor heaters can significantly increase operator’s respirable dust exposure. Rock Products 104(4):39–44. Cecala AB, Organiscak JA, Heitbrink WA, Zimmer JA, Fisher T, Gresh RE, Ashley JD [2004]. Reducing enclosed cab drill operator’s respirable dust exposure at surface coal operation with a retrofitted filtration and pressurization system. SME Transactions 2003, Vol. 314, Littleton, CO: Society for Mining, Metallurgy, and Exploration, pp. 31–36. Cecala AB, Organiscak JA, Zimmer JA, Heitbrink WA, Moyer ES, Schmitz M, Ahrenholtz E, Coppock CC, Andrews EH [2005]. Reducing enclosed cab drill operator’s respirable dust exposure with effective filtration and pressurization techniques. J Occup Environ Hyg 2(1):54–63. CFR. Code of Federal requlations. Washington, DC: U.S. Government Printing Office, Office of the Federal Register. NIOSH [1996]: NIOSH Alert: Preventing silicois and deaths in construction workers. Cincinnati, OH: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 96–112. NIOSH [2001]. Sweeping compound application reduces dust from soiled floors within enclosed operator cabs. Pittsburgh, PA: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Technology News 487(1–2). NIOSH [2002]. NIOSH hazard review: health effects of occupational exposure to respirable crystalline silica. Cincinnati, OH: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2002–129. NIOSH [2008]. Improvements in mobile equipment cabs to reduce dust exposure. Cincinnati, OH: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH) [www.cdc.gov/niosh/nas/mining/intermediateoutcome6.htm]. For More InformationThe information in this document is based on NIOSH field studies. More information about silica hazards and controls is available on the NIOSH Web site at www.cdc.gov/niosh/topics/silica/default.html. To receive more information about occupational safety and health topics, contact NIOSH at Telephone: 1–800–CDC–INFO (1–800–232–4636) or visit the NIOSH Web site at www.cdc.gov/niosh For a monthly update on news at NIOSH, subscribe to NIOSH eNews by visiting www.cdc.gov/niosh/eNews. Mention of any company or product does not constitute endorsement by NIOSH. In addition, citations to Web sites external to NIOSH do not constitute NIOSH endorsement of the sponsoring organizations or their programs or products. Furthermore, NIOSH is not responsible for the content of these Web sites. This document is in the public domain and may be freely copied or reprinted. NIOSH encourages all readers of the Workplace Solutions to make them available to all interested employers and workers. As part of the Centers for Disease Control and Prevention, NIOSH is the Federal agency responsible for conducting research and making recommendations to prevent work-related illnesses and injuries. All Workplace Solutions are based on research studies that show how worker exposures to hazardous agents or activities can be significantly reduced. Reducing Hazardous Dust in Enclosed Operator Cabs During ConstructionDHHS (NIOSH) Publication No. 2009-123April 2009Safer • Healthier • People™ DEPARTMENT OF HEALTH AND HUMAN SERVICES
|
|
||||||||||||||||