| Document cover page Click the image to enlarge |
This report (Independent Functional Safety Assessment Guidance 7.0) is the last in a nine-part series of recommendations and guidance addressing the functional safety of processor-controlled mining equipment. It is part of a risk-based system safety process encompassing hardware, software, humans, and the operating environment for the equipment's life cycle. Figure 1 shows a safety framework containing these recommendations. The reports in this series address the various life cycle stages of inception, design, approval and certification, commissioning, operation, maintenance, and decommissioning. These recommendations were developed as a joint project between the National Institute for Occupational Safety and Health and the Mine Safety and Health Administration. They are intended for use by mining companies, original equipment manufacturers, and after-market suppliers to these mining companies. Users of these reports are expected to consider the set in total during the design cycle.
Author(s): | Sammarco-JJ, Flynt-JS |
Reference: | Pittsburgh, PA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2006-131, Information Circular 9488, 2006 Apr; :1-31 |
2006-131 (PDF, 812 KB)
A link above requires the Adobe Acrobat® Reader. You can download a reader for free from Adobe through our Accessibility/Tools page. |
|
Related Documents:
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 1: 1.0 Introduction (PDF, 503 KB, 2001-04)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 2: 2.1 System Safety (PDF, 496 KB, 2001-04)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 3: 2.2 Software Safety (PDF, 1515 KB, 2001-09)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 4: 3.0 Safety File (PDF, 426 KB, 2002-05)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 5: 4.0 Independent Functional Safety Assessment (PDF, 527 KB, 2003-05)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 6: 5.1 System Safety Guidance (PDF, 1181 KB, 2005-08)
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts) - Part 8: 6.0 Safety File Guidance (PDF, 1202 KB, 2006-04)
|