General
Procedures |
|
Standard
Application Procedures
for the Revised Approval Modification Program (RAMP)(ASAP1005) |
|
Submission of Approval Applications in Electronic Format
|
Applied Engineering Division Procedures |
|
Standard Application Procedure
for Part 7 Refuge Alternative Approval, Extension of Approval and Subsequent Approval (ASAP6004) |
|
Standard Application Procedure
for Part 7 Refuge Alternative Structural Component Approval, Extension of Approval and Subsequent Approval, under �505 (ASAP6005) |
|
Standard Application Procedure
for Part 7 Refuge Alternative Breathable Air Component Approval, Extension of Approval and Subsequent Approval, under �506 (ASAP6006) |
|
Standard Application Procedure
for Part 7 Refuge Alternative Air Monitoring Component Approval, Extension of Approval and Subsequent Approval, under �507 (ASAP6007) |
|
Standard Application Procedure
for Part 7 Refuge Alternative Harmful Gas Removal Component Approval, Extension of Approval and Subsequent Approval, under �508 (ASAP6008)
|
Electrical Safety Division Procedures |
|
Criteria for the Evaluation and Test (Updated 11/04/2008)
of Intrinsically Safe Apparatus and Associated Apparatus
(ACRI2001)
- Digitized MSHA Minimum Ignition Curves (Excel) (Last Updated 05/05/2009)
The MSHA minimum ignition curves for methane-air atmospheres were derived from ACRI2001. The hardcopy ignition curves in ACRI2001 remain the official version.
|
|
Criteria for Acquiring Illumination Data
in a STE Applicant抯 Darkroom (ACRI2002) |
|
Design and Performance Criteria
for Acceptance of Ground Wire Monitor Systems (ACRI2003) |
|
Criteria for Using the Crewstation Analysis Program (CAP)
to Acquire Light Survey Data Required for STE Applications (ACRI2006) |
|
Design Criteria for Microprocessor Based
Motor Overload Protection Systems (ACRI2007) |
|
Intrinsically Safe Active Voltage/Current Power Source Criteria (ACRI2011) |
|
Approval of Distribution Systems (ACRI2101)
|
|
Criteria for the Evaluation
of a Window or Lens on an Explosion-Proof (X/P) Enclosure (ACRI2102) |
|
Standard Application Procedure
for Part 18 Shearer Evaluation and Extension of Shearer Evaluation (ASAP2001) |
|
Standard Application Procedure
Field Modifications (ASAP2006) |
|
Standard Application Procedures
for Evaluation of Mine-Wide Monitoring Systems, Barrier Classifications, and Sensor Classifications (ASAP2008) |
|
Standard Application Procedures
for Permits to Use Experimental Face Equipment under Part 18, 30 CFR (ASAP2009) |
|
Standard Application Procedure
for Part 18 Machine/System Approval and Extension of Approval (ASAP2011) |
|
Standard Application Procedure
for Part 7 Battery Assembly Approvals, Subsequent Approvals and Extensions of Approval (ASAP2013) |
|
Standard Application Procedures
for Certifications, Simplified Certifications and Extensions of Certifications (ASAP2015) |
|
Standard Application Procedure
for the Approval or Evaluation of Intrinsically Safe Apparatus and Associated Apparatus per 30 CFR Part 18 (ASAP2016)
|
|
Standard Application Procedure
for Part 7 Motor Approvals, Subsequent Approvals and Extensions of Approval (ASAP2017) |
|
Standard Application Procedure
for monitor and power systems (MAPS) Acceptance Actions (ASAP2018) |
|
Standard Application Procedure
for Acceptance or Extension of Acceptance of Ground Wire Monitor Systems (ASAP2019) |
|
Standard Application Procedures
for Acceptance of Ground Wire Devices (ASAP2021) |
|
Standard Application Procedure
for Statement of Test and Evaluation (STE) for Mining Machines and Longwall Mining Systems (ASAP2023) |
|
Standard Application Procedure
for the Approval of Mine Communication Equipment and Signaling Devices per 30 CFR Part 23 (ASAP2028) |
|
Standard Application Procedure
for the Approval of Portable Methane Indicating Detectors per 30 CFR Part 22 (ASAP2029)
|
Mechanical and Engineering Safety Division Procedures |
|
Standard Application Procedure for Diesel Electric Evaluation and Extension of Diesel Electric Evaluation (ASAP2031)
|
|
Simplified Machine/Electrical Checklist
for Part 36 Approval Applications (ASAP3001)
|
|
Alternate Application Procedures
for Approval of Diesel Powered Equipment Under
Part 36 Title 30 Code of Federal Regulations (ASAP3003) |
|
Field Modification Application
Procedures (Electrical Lighting Systems) (ASAP3005) |
|
Diesel Safety Component Certification Applications, 30 CFR 36 (ASAP3006) (PDF) |
|
Supplemental Application Procedures
Under Part 36 for Machines Containing Integral Electrical Systems, 30 CFR 36 (ASAP3007) |
|
Dust Collector Approval and Certificate of Performance Applications (ASAP3010) |
|
Guidelines for the Suitability Evaluation of New or Novel Mine Fire Fighting Agents (ASAP3025)
|
Quality Assurance and Material Testing Division Procedures |
|
Performance Criteria and Test Guidelines
for Evaluation of Nontraditional Ventilation Controls in Underground Coal Mines(ACRI5001)
|
|
Design and Performance Criteria
for Non-Asbestos Packing Material (ACRI5002)
|
|
Standard Application Procedures
for Acceptance Of Flame-Resistant Solid Products Taken Into Mines (ASAP5001) |
|
Standard Application Procedure for Approval of Fire-Resistant Hydraulic Fluids According to the Code of Federal Regulations, Title 30, Part 35 (ASAP5003) |
|
Standard Application Procedure
for Sealants Applied to Underground Ventilation Controls (ASAP5005) |
|
Application Procedure
for a Suitability Evaluation of Nontraditional Ventilation Controls (ASAP5006) |
|
Standard Application Procedure for Approval of Electric Cables, Signaling Cables and Splice Kits, Including the Splice Kit Option (ASAP5007) |
|
Standard Application Procedure for Approval of Flame-Resistant Brattice Cloth and Ventilation Tubing (ASAP5008) |
|
Standard Application Procedure
for Acceptance of Conduit Hose, Fire Suppression Hose Cover and Fire Hose Liner for use in Underground Coal Mines (ASAP5009) |
|
Standard Application Procedure for Acceptance of Non-Asbestos Packing Material (ASAP5010) |
|
Standard Application Procedure for the Acceptance of Lifelines for Underground Coal Mines (ASAP5013) |
|
Standard Application Procedure* for Approval of Flame-Resistant Conveyor Belt, 30 CFR, Part 14 (ASAP5014). |