New Technologies for Accident Prevention
Safety... Something YOU can live with!
|
Through the use of new technology, the mining industry is realizing gains in the areas of employee safety and health. MSHA is promoting the use of new technologies to prevent accidents, illnesses, and injuries to miners. The projects outlined below were facilitated by MSHA based on an analysis of the root causes of accidents and illnesses. In many cases, we have partnered with equipment manufacturers to assist us in developing products to enhance safety and health to the miner. Many of the projects are currently under development and are not commercially available for use in the mining industry. As these products become commercially available, a notice will be posted in this section. This section of the MSHA web site is dedicated to technologies that have the potential to improve safety and health. We encourage mine operators to further explore these technologies.”
New Technologies
Better Lighting for Metal-Nonmetal In-Mine Preblast Operations
Accidents in metal-nonmetal mines have occurred that indicate the need for improved lighting while performing preblast loading operations. An engineering study was conducted to determine the feasibility of installing supplemental lighting on underground mining lift equipment used in blast hole loading operations. The study identified two types of lighting systems that could be installed on lift equipment to significantly improve the ability of miners to judge the integrity of the mine roof and back.
Proximity Dectection
Proximity detection is a technology that can be installed on mobile machinery to detect the presence of personnel or machinery within a certain distance of the machine. Proximity detection systems can be programmed to send warning and machine shutdown commands when the programmed areas are encroached. MSHA has assisted the industry in the development of this technology on a variety of mobile machinery, both underground and surface.
Surge Pile Accident Prevention
Operating a dozer pushing coal on a surge pile
has been called the most dangerous job at preparation plants. In
just over a year, two bulldozer operators have died performing this
job. They lost their lives when their bulldozers fell into hidden
voids, and they were buried in coal and could not escape. This
initiative details best practices to significantly reduce, if not
eliminate, surge pile fatalities.
See also: Status Report - "Stronger Dozer Cab Windows: A Way to Improve Surge-Pile Safety" - File is PDF.
See also: West Virginia Regulation
-This regulation took effect January 1, 2001.
See also:
Streaming Windows Media File Available for Viewing!
Disclaimer |
The information found through the links from this site is not controlled by MSHA or the U.S. Department of Labor (DOL). Links to web sites outside DOL, are offered for your convenience in accessing related information, but do not constitute an endorsement of the web site, or its content, nor does it suggest that there are no other web sites which may offer related information. MSHA provides these information sources because MSHA believes they are helpful and informative. MSHA is not affiliated with these organizations and is not responsible for the information provided. Once you leave this web site, the MSHA privacy policy no longer applies. |
|