Trimble Software Atlantic (AOR-E), (AOR-W), Pacific (POR), and Indian (IOR) Oceans Procedures
************************************** IMPORTANT **************************************
- It is necessary to setup an address for the AMVER/SEAS message in the Standard C software.
The SETUP procedure provided below is a one-time process to be completed on initial installation.
- The TRANSMISSION instructions provided below are to be followed each time a message is
transmitted.
- These instructions may vary slightly, depending on software version and hardware.
********************************************************************************************
SETUP PROCEDURES
- At the MAIN MENU highlight SETUP option and press <ENTER>. Select MAIL ADDRESS and
Press <ENTER>. Select INSERT MAIL ADDRESS and Press <ENTER>. Press <ENTER> twice
to display the EDIT ADDRESS Screen.
- At the EDIT ADDRESS section the ENTER NAME FILE will appear and enter AMVER/SEAS
(This is the name of the file).
- Tab to PRESENTATION, this field defaults to IA5 (7-bit. All Networks.) Press <ENTER>
to view options. Select BINARY (8-Bit, No Telex)
- Tab to DATA FORMAT field. The STANDARD (All Presentations) is displayed as the
default. If not selected, press enter to view options. Select Standard (All Presentations.)
Press <ENTER>.
- Tab to PREFIX FIELD and type in SEAS into this field. (This is the SPEC ACCESS
CODE). Leave the Country Code, Destination, and Extension fields BLANK.
- Tab to CES/LES and press <ENTER>. Select the appropriate Land Station corresponding
to your ships location press <ENTER>.
AOR (W) Southbury 001
AOR (E) Southbury 101
POR Santa Paula 201
IOR Eik (Oslo) 304
******************** No other stations can relay the messages ***********************
- At the DELIVERY NETWORK select SPEC ACCESS CODE and Press <ENTER>.
- Press ESC to exit the Edit Address menu, continue to press ESC until the program returns to
the Main Menu. The AMVER/SEAS address is now saved in the Address Book and is available
for transmission of meteorological observations.
SETUP AND TRANSMISSION PROCEDURES
- Place DATA DISK in TRIMBLE INMARSAT "C".
- Select SETUP from Main Menu <ENTER>. Highlight FILE DIRECTORY SETUP <ENTER>.
At Directory Setup ensure the first line (MESSAGE DIRECTORY) indicates only A:\
- At MAIN MENU select COMPOSE <ENTER>. Highlight SEND MESSAGE <ENTER>.
Message will appear (MET.BIN) or Other Appropriate File <ENTER>.
- At the ADDRESS INDEX highlight the entry AMVER/SEAS <ENTER>
- Select MSG OPTION highlight SEND MESSAGE <ENTER>. A message will be displayed letting
you know that the Message was put in the outgoing mailbox.
NOTE: The following are the FILE NAME for each particular message.
--Meteorological Observation MET.BIN
--Sail Plan SP.BIN
--Arrival Report FR.BIN
--Deviation Report DR.BIN
--Administrative Report ADMIN.BIN
|