Search NIOSH | NIOSH Home | NIOSH Topics | Site Index | Databases and Information Resources | NIOSH Products | Contact Us |
NIOSH Publication No. 2007-122:Simple Solutions: Ergonomics for Construction Workers |
April 2007 |
|
ForewordConstruction is a physically demanding occupation, but a vital part of our nation and the U.S. economy. In 2006, the total annual average number of workers employed in construction rose to an all-time high of nearly 7.7 million, according to U.S. Bureau of Labor Statistics data. This large workforce handled tasks that range from carrying heavy loads to performing repetitive tasks, placing them at risk of serious injury. The physically demanding nature of this work helps to explain why injuries, such as strains, sprains, and work-related musculoskeletal disorders, are so prevalent and are the most common injury resulting in days away from work. Although the construction industry presents many workplace hazards, there are contractors in the U.S. who are successfully implementing safety and health programs to address these issues, including work-related musculoskeletal disorders. The safety and health of all workers is a top priority for NIOSH. This booklet is intended to aid in the prevention of common job injuries that can occur in the construction industry. The solutions in this booklet are practical ideas to help reduce the risk of repetitive stress injury in common construction tasks. While some solutions may need the involvement of the building owner or general contractor, there are also many ideas that individual workers and supervisors can adopt. There are sections on floor and ground-level work, overhead work, material handling, and hand-intensive work. For each type of work, "simple solutions" for various tasks are described in a series of "Tip Sheets". worker and employer, how much it costs, and where it can be purchased. All these solutions are readily available and are actually in use today in the U.S. construction industry. We encourage both contractors and workers to consider the "simple solutions" in this booklet and look for ways you can adapt them to your own job and worksite.
Why This Booklet?This booklet is intended for construction workers, unions, supervisors, contractors, safety specialists, human resources managers-anyone with an interest in safe construction sites. Some of the most common injuries in construction are the result of job demands that push the human body beyond its natural limits.Workers who must often lift, stoop, kneel, twist, grip, stretch, reach overhead, or work in other awkward positions to do a job are at risk of developing a work-related musculoskeletal disorder (WMSD). These can include back problems, carpal tunnel syndrome, tendinitis, rotator cuff tears, sprains, and strains. To aid in the prevention of these injuries, this booklet suggests many simple and inexpensive ways to make construction tasks easier, more comfortable, and better suited to the needs of the human body. Example of a "simple solution." This ironworker uses a tool that automatically ties rebar with the pull of a trigger. The extended handle lets him work while standing upright. No leaning, kneeling, stooping, or hand twisting are necessary.
Did you know ... ?
The "Tip Sheets" in this booklet show how using different tools or equipment may reduce the risk of injury. All of the items described in this booklet have been used on working construction sites. Given the nature of construction, some solutions here may not be appropriate for all worksites. Sometimes solutions discovered for one trade can be modified for other trades. This booklet provides general information regarding the methods some construction contractors have used to reduce workers' exposures to risk factors for work-related musculoskeletal disorders. The examples described in this booklet may not be appropriate for all types of construction work. The use of the tools and equipment described in the booklet does not ensure that a musculoskeletal disorder will not occur. The information contained in this booklet does not produce new obligations or establish any specific standards or guidelines. Our goal has been to describe solutions that are also cost-effective. Although the cost of some of the solutions here exceeds $1,000, which may be too high for some contractors, we believe successful implementation will lead to a quick recovery of the investment in many cases. Oh, My Aching Body!Construction work is hard work, and construction workers feel the results. In one survey, seven out of ten construction workers from 13 trades reported back pain, and nearly a third went to the doctor for it (Cook et al, 1996). Back pain, carpal tunnel syndrome, tendinitis, rotator cuff syndrome, sprains, and strains are types of musculoskeletal disorders. Work-related musculoskeletal disorders (WMSDs) are caused by job a ctivities and conditions, like lifting, repetitive motions, and work in confined areas. All of these are part of construction work. WMSDs can become long-term, disabling health problems that keep you from working and enjoying life. Not only do these injuries hurt your body, but they can reduce your earnings and your employer's profit. You have an increased risk of these injuries if you often:
On top of that, tight deadlines mean a fast pace. Pushing the pace increases your risk even more. A study of workers' compensation claims filed in Washington State between 1990-98 reported that the highest risks for developing a WMSD were "in industries characterized by manual handling and forceful repetitive exertions." According to the study, construction work accounted for 10 of the top 25 sectors in need of interventions to prevent neck, back, and upper extremity WMSDs (Silverstein, 1998). One insurance company reported that 29% of insured mechanical and electrical contractors' workers' compensation claims were due to WMSDs. A quarter of those claims resulted in temporary or permanent disability. The insurer also reported that WMSD claims for electrical contractors average around $6,600 for each WMSD, while the average claim for a mechanical contractor was around $7,300 (NIOSH 2006). Many people in construction believe that sprains and strains are just the nature of the business. But new tools and materials are now available that can make work less risky and increase productivity. This booklet shows some of the solutions, large and small, to WMSDs. As you read this booklet, the solutions may or may not apply to your specific jobsite or trade. You will need to review cost, quality, and site-specific information to make sure that the solution will meet your needs. Also, these ideas can be adapted. Notice the principles involved: What kinds of activities are most likely to cause injuries? How can they be minimized? Sometimes a small change in tools, equipment, or materials can make a big difference in preventing injuries. We wish you the best as you strive to make improvements to the work you do and your worksite.
What is Ergonomics?The goal of the science of ergonomics is to find a "best fit" between the worker and the job conditions. Ergonomics tries to come up with solutions to make sure workers stay safe, comfortable, and productive. Ergonomics is a new topic for the construction industry, but the ideas have been around for many years. For example, in 1894 the split-level scaffold was designed for masonry work in the U.S. to reduce workers' frequent bending. This new scaffold system was designed to increase workers' productivity by reducing the time spent in awkward positions. There is still a strong case for using ergonomic improvements both to reduce workers' exposure to risk factors for WMSDs and to improve their productivity. Ergonomics looks at how:
Are directly related to ...
Work-Related Musculoskeletal DisorderWork-related musculoskeletal disorders (WMSDs)are the leading cause of disability for people in their working years. They can be caused by frequently working in a way that puts stress on the body as such:
The best way to reduce WMSDs is to use the principles of ergonomics to redesign tools, equipment, materials, or work processes. Simple changes can make a big difference. Using ergonomic ideas to improve tools, equipment, and jobs reduces workers' contact with those factors that can result in injury. When ergonomic changes are introduced into the workplace or job site, they should always be accompanied by worker training on how to use the new methods and equipment, and how to work safely. Do You Need an Ergonomics Program?Many ergonomics experts recommend that employers and joint labor-management groups develop their own ergonomics programs to analyze risk factors at the worksite and find solutions. These programs may operate as part of the site's health and safety program, or may be separate. An ergonomics program can be a valuable way to reduce injuries, improve worker morale, and lower workers' compensation costs. Often, these programs can also increase productivity. There may be a particularly urgent need for an ergonomics program at your site if:
Effective ergonomics programs have included the following elements:
Education and training programs have been developed for construction general contractors by the Associated General Contractors, the United Brotherhood of Carpenters and Joiners, the Sheet Metal Occupational Health Institute, and the Laborers' Union. Although the problems and solutions described in these organizations' materials may be specific to a sector or trade, you may find them useful when developing your own ergonomics program. For additional information on developing an ergonomics program, see Elements of Ergonomics Programs (NIOSH Pub. No. 97-117) at www.cdc.gov/niosh/docs/97-117. |
|
||||||||||||||||||||||