|
|
|
|
|
|
|
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
|
|
|
Health Effects
|
|
CAUTIONARY INFORMATION: Use adequate ventilation. In case of contact with eyes, immediately flush with plenty of water. Sealer can be washed from skin with soap and water. Avoid prolonged skin contact. Do not take internally. For professional use only. DO NOT FREEZE. KEEP OUT OF REACH OF CHILDREN. Bar Code: 0-10306-10948-2 |
From MSDS
Users may notice a slight ammonia odor, but ammonia is present in low concentrations only and is not believed to present a hazard during normal use of this product. May cause minor irritation on contact with eyes, or prolonged contact with skin. Exposure to ammonia vapors may cause eye and respiratory tract irritation. Ingestion of vinyl acrylic polymer resin will cause upset stomach and indigestion.
|
From MSDS
No chronic effects known.
|
The manufacturer's Material Safety Data Sheet (MSDS) does not state whether the ingredients are considered carcinogens or potential carcinogens. |
N |
N |
N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
1996-04-18 |
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Follow general good industrial and hygienic practices. Keep out of reach of children. Do not expose to temperatures exceeding 90 F (32C). For room temperature use only, do not use heat to cure. Normal use of a carpet seaming iron following application of this product is acceptable. Keep away from sparks or flame. Do not allow product to freeze-will degrade adhesive properties.
|
From MSDS
Non-hazardous under federal RCRA. Clean-up waste from normal product use, when diluted with water, may be discharged to a Public Owned Treatment Works in compliance with applicable Federal, state, and local pretreatment requirements. Dried adhesive may be incinerated or landfilled in compliance with Federal, state, and local regulations. Responsibility for proper waste disposal is with the owner of the waste. The plastic container this product is shipped in is recyclable.
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|