|
|
|
|
|
|
|
|
|
|
Brand Information
|
Sprayway Saw Blade Cleaner Pitch and Gum Remover No. 836 |
aerosol |
Home Maintenance » Cleaner » saw blades
Home Maintenance » Cleaner » tar/pitch remover
Home Maintenance » Tar/Pitch » remover
|
800-332-9000 |
2006-03-15 |
Products with similar usage in this database |
|
|
|
|
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
|
|
|
Health Effects
|
|
From MSDS
Route(s) of Entry - Inhalation: X; Eyes: X; Skin: X;
Signs and Symptoms of Exposure:
Inhalation is the primary source of exposure and may cause severe respiratory irritation, nausea, dizziness, fatigue, confusion, unconsciousness.
Severe skin contact may cause irritations and burns. Possible skin absorption. Eye contact may cause severe or permanent damage.
Medical Conditions Generally Aggravated by Exposure: Preexisting skin or eye disorders may be aggravated by exposure to this product.
|
From MSDS
No information provided.
|
From MSDS
No regulated ingredients.
|
From MSDS
Inhalation: Remove victim to fresh air and restore breathing if necessary. Stay with victim until arrival of emergency medical personnel.
In case of eye contact, flush immediately with large amounts of water for 15 minutes. If irritation persists, seek medical attention.
Skin: Remove contaminated clothing. Wash affected area wit soap and water. If irritation persists, consult a physician.
|
3 |
2 |
2 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
2001-04-21 |
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Avoid breathing vapor. Keep away from heat and flame. Use with adequate ventilation. Do not puncture or incinerate containers. Do not expose to direct sunlight or store at temperatures above 130F (54C). Store as Level 1 Aerosol (NFPA 30B).
|
From MSDS
Do not puncture or incinerate containers. When contents are depleted continue to depress button until all gas is expelled. Dispose of container in accordance with local, state, and federal regulations.
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|