 |
|
|
|
|
|
|
 |
|
|
|
Brand Information
|
| Zinc It Instant Cold Galvanize (aerosol) |
| aerosol |
Home Maintenance » Plumbing » galvanizing spray
Home Maintenance » Galvanizing Agent » cold galvanize spray
|
| 800-556-5074 |
| 2001-06-26 |
| Products with similar usage in this database |
|
|
|
|
|
|
|
|
Manufacturer
|
| CRC Industries, Inc. |
| Div., Berwind Corp. |
| 885 Louis Drive |
| Warminster |
| PA |
| 18974 |
| 215-674-4300 |
| 215-674-2196 |
| 800-556-5074 |
| 2008-01-09 |
| Products by this manufacturer |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
|
|
|
|
Health Effects
|
|
| Extremely flammable. Harmful or fatal if swallowed. Vapor Harmful. Contents under pressure. Extinguish all flames, pilot lights and heaters. Do not apply when equipment is energized. Vapors will accumulate readily and may ignite. Use only with adequate ventilation. Maintain ventilation during use and until vapors are gone. Do not smoke while spraying. |
From MSDS
Potential Health Effects:
Inhalation: Headaches, dizziness, nausea and anesthesia.
Eyes: Irritation
Skin: Irritation
Ingestion: NA
Medical Conditions Aggravated by Exposure: Breathing difficulties.
|
From MSDS
Chronic Overexposure: May cause contact dermatitis. Could have liver and kidney effects.
|
From MSDS
OSHA: No
IARC: No
NTP: No
|
From MSDS
Inhalation: Remove to fresh air. Give artificial respiration if necessary.
Eyes: Flush with large amounts of water for 15 minutes.
Skin: Remove contaminated clothing and wash area with soap and water.
Ingestion: Call a physician. Do not induce vomiting.
|
| 2 |
| 4 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2000-07-26 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Handling Procedures: Store in a cool, dry area. Aerosol cans must be maintained below 120 o F to prevent cans from exploding.
Ecotoxicity: No data available.
Environmental Fate: No data available for biodegradation.
|
From MSDS
Disposal: This material if discarded may be hazardous waste under U.S. EPA RCRA regulations. All disposal activities must comply with federal, state and local regulations. Contact your local or state environmental agency for specific rules. Do not dump into sewers, on the ground or into any body of water.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
