 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
(Complete MSDS for this product)
|
 |
|
|
|
Health Effects
|
|
From MSDS
HEALTH HAZARD DATA
Route(s) of Entry: Inhalation (Y); Skin (Y); Eye (Y); Ingestion (Y)
Health Hazards:
Inhalation � At elevated temperatures or in enclosed spaces, mist or vapor may irritate the mucous membranes in the nose, throat, bronchi, and lungs. Eye - Short-term contact with liquid, mist, or vapor may cause irritation. Symptoms include stinging, watering, redness, and swelling.
Skin - Symptoms include pain, sensation of heat, discoloration, swelling and blistering. Repeated or prolonged contact may produce irritation and inflammation.
Ingestion - Can cause laxative effect. If aspirated into the lungs, liquid can cause severe lung damage or death. Large volumes can cause generalized depression, headache, drowsiness, nausea, vomiting, and diarrhea.
Medical Conditions Generally Aggravated by Exposure: Pre-existing skin disorders, central nervous system disease, respiratory system, liver and/or kidney.
|
From MSDS
Prolonged and/or repeated skin contact may cause irritation and inflammation. Symptoms include defatting, redness, dryness, blistering eczema-like lesions, scaly dermatitis, and/or more serious skin disorders. Ingestion and subsequent aspiration into the lungs may cause pneumatocele (lung cavity) formation and chronic lung dysfunction.
|
From MSDS
NTP (N); IARC Monographs (N); OSHA Regulated (N)
|
From MSDS
Inhalation - Move victim to fresh air. If not breathing, immediately begin rescue breathing. If breathing is difficult, a qualified individual should administer 100% humidified oxygen. Seek medical attention immediately.
Eye � Check for and remove contact lenses. Flush eyes with cool, clean, low-pressure water while occasionally lifting and lowering eyelids. Seek medical attention if excessive tearing, redness, or pain persists.
Skin - Remove contaminated clothing. Wipe off excess material. Wash exposed skin with mild soap and water. Seek medical attention if tissue appears damaged or if irritation persists.
Ingestion � Do not induce vomiting unless directed by a physician. Do not give anything to drink unless directed by a physician. If significant amounts are swallowed or irritation or discomfort occurs, seek medical attention immediately.
|
| 1 |
| 2 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1995-06-19 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Avoid water contamination and extreme temperatures to minimize product degradation. Empty containers may contain product residues that can ignite with explosive force. Do not pressurize, cut, weld, braze, solder, drill, grind or expose empty containers to flames, sparks, heat, or other potential ignition sources. Keep container closed when not in use. Store in a cool, dry, well-ventilated area. Do not store with strong oxidizing agents. Do not store at elevated temperatures or in direct sunlight.
Other Precautions: KEEP AWAY FROM CHILDREN!
|
From MSDS
Determine if the material is hazardous waste at time of disposal. Transportation, treatment, storage, and disposal of waste material must be in conducted in accordance with RCRA regulations. State and local regulations may be more restrictive. Contact the RCRA/Superfund Hotline at 800-424-9346 for guidance concerning case specific disposal issues.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
| Chemical | CAS No / Unique ID | Percent |
| Naphthalene | 000091-20-3 | 0.03-0.04 |
| Ethylbenzene | 000100-41-4 | 0.005-0.006 |
| Toluene | 000108-88-3 | 0.0004 |
| Xylene (mixed isomers) | 001330-20-7 | 0.02-0.04 |
| Stoddard solvent | 008052-41-3 | 23-25 |
| Polyisobutene | 009003-27-4 | 4-5 |
| Acrylic polymers | 063197-48-8 | 0.1-0.2 |
| Solvent-refined heavy paraffinic distillate | 064741-88-4 | 45-50 |
| Paraffinic oil, lightly refined | 064741-89-5 | 0.25 |
| Residual oils, petroleum, solvent-refined | 064742-01-4 | 10 |
| Distillates, petroleum, hydrotreated heavy paraffinic | 064742-54-7 | 0-4 |
| Distillates, petroleum, hydrotreated light paraffinic | 064742-55-8 | 0-0.25 |
| Distillates, petroleum, solvent-dewaxed heavy paraffinic | 064742-65-0 | 0-0.15 |
| Solvent naphtha, petroleum, heavy aromatic | 064742-94-5 | 0.34 |
| Fatty Ester Mixture | 068171-46-0 | 0.1-0.3 |
| Fatty Ester Mixture | 068171-50-6 | 0.1-0.3 |
| Isoctadecanoic acid, reaction products with tetraethylenepentamine | 068784-17-8 | 9-10 |
| 1,4-Dialkylaminoanthraquinone | 071819-49-3 | 0.03 |
| Lubricating oils, petroleum, C15-30, hydrotreated neutral oil-base | 072623-86-0 | 0-0.15 |
| Amines, polyethylenepoly-, reaction products with succinic anhydride
polyisobutenyl derivs. | 084605-20-9 | 0.91 |
| Polyolefin polyamine succinimide, Molybdenum complex | 186432-61-1 | 1.65 |
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
