10-Channel Equal Power
10-Channel Equal Power is a feature in some of Denon’s high-end receivers and power amplifiers. These fully configurable amplifiers provide many combinations. Some examples are: o Dual 5.1 Discrete Zones with DVD-A/SACD o 5.1 Main Zone all channels Bi-Amplified o 5.1 Main Zone, Z2 & Z3 Stereo, Z4 Mono o 6.1 Main Zone, Zones 2 and 3 Stereo o 7.1 Main Zone, Zone 2 Stereo, Z3 Mono o 7.1 Main Zone, Front L/C/R Bi-Amplified o 9.1 Main Zone, Zone 2 Mono

2 way RC
2-Way Remote capability allows the status information and current mode of a receiver or pre-amp to be shown directly on the display of the remote for ease of control without looking on the front panel of the receiver or pre-amp, or on the display. This allows multi zone operation and control without being in direct line of sight with the receiver, pre-amp or display which is perfect for RF control. (RC-7000CI & RC-7001RCI required and is also dependent on the Denon receiver or pre-amp used.)

24-bit/192-kHz D/A (digital-to-analog) Converters
These high speed, high accuracy digital-to-analog converters extract all the information contained in today’s high density digital sources. They convert 192,000 24-bit digital words per second into analog signals to extract the highest definition audio sound. They are fully capable of converting any signal from a DVD-Audio disc as well as providing superior reproduction from conventional CD, CD-R/CD-RW discs. Today’s converters also provide exceptional dynamic range and are largely free of “clock jitter,” a time-based inaccuracy that plagued earlier D/A converters.

5.1-, 6.1-, 7.1-Channels
A surround processor, or receiver, may produce 6, 7, or 8 channels of output, depending on the source and type of surround processing. The basic surround format (“5.1” surround) includes three full-range front channels (left, right and center), two full-range surround channels (left surround and right surround), and a low-frequency, or subwoofer channel. Because the subwoofer channel carries only the lowest octaves compared to the five full-range speakers, it is called the “.1” channel. A “6.1-channel setup” adds a separate full-range “center back” speaker to the 5.1 array. A “7.1”-channel system includes two “back” channels in addition to the surround channels.

5-Channel Equal Power
5-Channel Equal Power connects 5 speakers independently without requiring separate power amps for the pre-outs. It complements Dolby Digital EX and dts ES sound modes, allowing you to connect the 'surround back' speaker straight off the main amplifier without adding a power amplifier to support 5.1 surround formats. With built-in separate internal amplifiers to power each channel independently, this feature allows you to enjoy the same high power output capability per channel, giving a balanced and truly high-impact surround-sound environment.

6-Channel Equal Power
6-Channel Equal Power connects 6 speakers independently without requiring separate power amps for the pre-outs. It complements Dolby Digital EX and dts ES sound modes, allowing you to connect the 'surround back' speaker straight off the main amplifier without adding a power amplifier to support 6.1 surround formats. With built-in separate internal amplifiers to power each channel independently, this feature allows you to enjoy the same high power output capability per channel, giving a balanced and truly high-impact surround-sound environment.

6-Channel Inputs for DVD-Audio or SACD
These input jacks are for inputting multi-channel audio signals in high definition MUSE 3-1 format, multi-channel audio signals from an MPEG multi-channel decoder, SACD and DVD-Audio. The 6 channels are the Front left, Front right, Center, Surround left, Surround right and the Subwoofer. These connections are made by using 6 standard phono (RCA's) cables. The inputs are on the amplifier and by selecting 'Ext in' you can receive analog audio signals via a source such as a DVD player. Denon DVD players can be connected via the 6 phono cables to a Denon amplifier's 6-CH EXT inputs to allow for SACD or DVD-Audio transfer. This can also be used as an alternative to IEEE1394-output (Digital Audio) FireWire connection or the DENON LINK connection.

7-Channel Equal Power
7-Channel Equal Power is a feature used in various Denon amplifiers to connect 7 speakers independently so that separate power amps connected via pre-outs are not required. It allows you to connect the second 'surround back' speaker to complement the surround back speaker for 6.1, straight off the main amplifier without adding a power amplifier to support 7.1 surround formats. Amplifiers with 7-Channel Equal Power have built-in separate internal amplifiers to power each channel independently, thus allowing you to enjoy the same high power output capability per channel, giving a balanced and truly high-impact surround-sound environment.

7-Channel Stereo
Denon's 7-Channel Stereo mode enables top quality normal two channel stereo output from the surround speakers to provide a unique 7 channel stereo option. This mode can be fully utilized from any high quality stereo source via CD, tape, FM-radio or video recorder for dynamic 7-channel output. The 7-channel stereo is available if you have a surround back right speaker connected as well as the surround back left speaker used in 6.1, otherwise you can still experience multi-channel stereo output using a 5-channel-stereo or 6-channel-stereo configuration.

8-Channel Input
These input jacks are for inputting multi-channel audio signals in high definition MUSE 3-1 format, multi-channel audio signals from an MPEG multi-channel decoder, SACD and DVD-Audio. The 8 channels are the Front left, Front right, Center, Surround left, Surround right, Surround Back Left, Surround Back Right and the Subwoofer. These connections are made by using 8 standard phono (RCA's) cables. The inputs are on the amplifier and by selecting 'Ext in' you can receive analog audio signals via a source such as a DVD player. Denon DVD players can be connected via the 6 phono cables to a Denon amplifier's 6-CH or 8-CH EXT inputs to allow for SACD or DVD-Audio transfer. This can also be used as an alternative to IEEE1394-output (Digital Audio) FireWire connection or the DENON LINK connection.

Advanced AL24 Multi
In addition to the existing “AL24 Processing Plus” bit expansion technology, DENON has also developed “Advanced AL24 Processing” that dramatically improves information volume in the time axis region using high-speed signal detection and processing technology. In addition to expanding original 16-bit digital data to 24 bits, “Advanced AL24 Processing” uses data interpolation along the time axis or up-converted sampling to achieve natural interpolation without losing the original data. Advanced AL24 Processing Multi Channel is conducted for all channels and modes other than DSD DIRECT.

Advanced AL24 Processing
The acclaimed Advanced AL24 DSP processing improves the fidelity of high resolution stereo PCM sources such as CD and DVD (up to 192kHz sampling frequencies). Through sophisticated DSP processing algorithms, it improves low level detail and enhances fidelity by up-sampling and adaptive filtering techniques. Advanced AL24 also provides increased dynamic range and spatial information, bringing out all the nuances with optimum clarity and natural fidelity. For additional information, visit the Denon Tech Showcase.

AL24 Processing
AL24 Processing is a newly developed technology that reduces quantization distortion and represents the ultimate analog waveform reproduction that is designed to support the higher numbers of bits and higher sampling rate of next-generation media. It senses the nature of the digital data being input and interpolates the data so that it faithfully replicates the original analog waveform.

AL24 Processing Plus
Denon has further developed its proprietary AL24 Processing, an analog waveform reproduction technology, to support the 192-kHz sampling frequency of DVD-Audio. This new technology thoroughly suppresses quantization noise with D/A conversion of LPCM signals to reproduce the low-level signals with optimum clarity that brings out all the delicate nuances of the music. For additional information, visit the Denon Tech Showcase.

ALPHA Processing
ALPHA processing is the world's first technical formula for reproducing an analog waveform from the reproduction of 16-bit data in 20-bit quality. The ALPHA processor interpolates the digital data recorded on a CD and reproduces it in a waveform that is very close to the way these musical signals would look in a natural analog waveform.

ASD-1R
The Denon ASD-1R (and the newer ASD-11R released in 2008) is a convenient iPod docking station compatible with this Denon component. Charging, iPod control, and playback of audio and video content is possible, and is dependent on each device's capabilities.

Audyssey Dynamic Volume
Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. This feature is available by purchasing the feature package upgrade.

Audyssey Equalized
Audyssey is the first technology to properly measure sound information throughout a listening area and then combine this information to accurately represent the acoustical problems in the room. Based on these measurements, Audyssey calculates an equalization solution that corrects for both time and frequency response problems.

Audyssey MultEQ
Room acoustic measuring and correction system analyzes (via the included microphone) the audio characteristics of your speaker system and your listening environment at up to 6 measurement points and automatically tailors the sound for top audio fidelity.

Audyssey MultEQ XT
The Audyssey MultEQ XT provides advanced room correction and calibration technology. During the Auto Set-Up mode, MultEQ XT automatically determines how many loudspeakers are connected, whether they are connected in phase and whether they are satellites or subwoofers. After processing, it then analyzes and calibrates speaker level, size, and distance. MultEQ XT detects the proper crossover point and determines correct frequency response for up to eight listener positions simultaneously. Denon's implementation of MultEQ XT uses multiple DSP processors with high-end digital-to-analog converters. Both the Room EQ and Auto Set-Up features can be disabled if required. For additional information, you can download an Audyssey MultEQ XT tech note in the download section for the products having the feature.

Auto Setup
The Auto Set-Up feature eases setup hassles by confirming speaker phase, assessing the sizes of all of your speakers, measuring speaker-to-listener distances, and balancing speaker levels. With the Denon DM-A405 or DM-S205 placed in your favorite listening seat, this feature uses a test tone generator and proprietary programming to precisely balance speaker levels and fine-tune the delay settings for each speaker. The result is optimized system performance for your specific home theater room.

Auto Set-Up/Room EQ Adjust
The Auto Set-Up/Room EQ Adjust feature eases setup hassles by confirming speaker phase, assessing the sizes of all of your speakers, measuring speaker-to-listener distances, and balancing speaker levels. With the Denon DM-A405, DM-S205 or DM-S305 calibration-grade microphone (some optional) placed in your favorite listening seat, this feature uses a test tone generator and proprietary programming to precisely balance speaker levels and fine-tune the delay and EQ settings for each speaker. The result is optimized system performance for your specific home theater room.

Back Light Remote
Back light remote controls offer visibility in low light or dark theater conditions as the keys or panel are lit from behind. Users do not have to remember where keys are in order to operate the component as they can be easily seen.

Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, dts, or other formats emphasizes high-frequency range due to a theater’s front speakers being placed behind the movie screen. If this sound is reproduced in the home theater without correction, the high-frequency range can be too strong. Denon amplifiers feature a Cinema Equalizer to correct these high-frequency components so that the sound is clearer and easier to listen to.

Compact Disc - Digital Video

Compact Disc-Recordable (CD-R)
CD-R is a recordable compact disc that can be written to only once. Once data is “burned” onto the disc, it cannot be altered, erased, or written over.

Compact Disc-Rewritable (CD-RW)
The data on CD-RW discs can be erased, modified, or written over. You will need a CD-RW recorder to burn CD-RW discs. Not all players can read CD-RW discs as they do not reflect a laser beam with the same intensity as do CD and CD-R discs.

Composite Video
Composite Video is a video signal format that transmits both chrominance (color) and luminance (brightness) information on a single 75-ohm cable. A virtually universal format, it provides the minimum quality you should expect from today’s home entertainment components. For the technically-minded, chrominance is carried in a 3.58-MHz sideband and is filtered by the television’s notch or comb filter. Poor filtering can result in “dot crawl,” “hanging dots,” or other image artifacts.

Custom Integration
Custom Integration "CI" is Denon's certification to custom installers that models marked with the CI stamp have advanced connectivity and control features often required for custom home integration and theater applications using premium control systems.

DDSCHD
D.D.S.C.-Digital-Circuit is used for high-quality Sound Reproduction. It is a circuit configuration specially designed by Denon in which all elements of the surround processor are optimized through the use of selected high-performance discrete components, including separate A/D and D/A converters, with sophisticated DSP surround decoding. The latest version D.D.S.C.-HD, incorporates the latest updates to accommodate today's HD requirements.

Denon Link
Connected via a shielded twisted pair (STP) RJ-45 fitted cable to a Denon Link-compliant A/V amplifier, the balanced signal transfer offers lower voltage than coaxial or unbalanced cables. Since Denon Link is far less susceptible to radiated noise, it ensures the highest level of signal transfer. The Denon Link interface is able to transfer high grade LPCM 24-bit, 192kHz, 2-channel and 96kHz, 24-bit, multi-channel digital output. Denon Digital Link uses low-voltage differential signaling (LVDS). Transfer capabilities of greater than 1.2 Gbps at a differential voltage of approximately 0.3 Vpp are possible. For additional information, visit the Denon Tech Showcase.

Denon Pixel Image Correction (DPIC)
DPIC is a patented image enhancer algorithm and processing method, which enhances the target pixel by analyzing all the surrounding 8 pixels to produce a more natural image. It detects and processes images with vertical, horizontal and also diagonal direction at pixel level. The Luminance(Y) and Chrominance difference (Cr, Cb) signals are processed with the DPIC algorithm. The result of running this process on the signals and the corresponding pixels is a more natural image.

Digital Light Processing (DLP)
DLP is a method of displaying images developed by Texas Instruments. DLP projects video images by reflecting a light source off an array of tens of thousands of microscopic mirrors. Each mirror represents one pixel and reflects light toward the lens for white and away from it for black, modulating in between for various shades of gray. Three-chip versions use separate arrays for the red, green, and blue colors. Single-chip arrays use a color-filter wheel that alternates each filter color in front of the mirror array at appropriate intervals.

Directional Correlation De-interlacing (DCDi)
DCDi is a specialized video processing developed by Faroudja that involves advanced algorithms to remove the jagged edges that appear when standard interlaced video is viewed on progressive scan displays. DCDi converts standard interlaced signals into progressive scan signals in order to eliminate the stair casing effect that conventional up-converters can introduce to diagonal edges.

DivX Video-Playback
DivX is an advanced digital media format. The DivX codec (short for compressor / decompressor) compresses the video to a convenient size without losing any noticeable quality. For example, the DivX codec can compress an MPEG-2/DVD file to nearly one-tenth its original size. Players displaying the DivX logo are capably of playing this type of disc.

Dolby Digital
Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to “5.1” channels – front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects. Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging and tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.

Dolby Digital EX
In a movie theater, film soundtracks that have been encoded with Dolby Digital surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program. This channel, called Surround Back, places sounds behind the listener in addition to the currently available front left, front center, front right, surround right, surround left and subwoofer channels. The additional channel provides the opportunity for more detailed imaging behind the listener and brings more depth, spacious ambience and sound localization then ever before.

Dolby Digital Plus
Next-generation multichannel audio format. Delivers up to 7.1 channels of better-than-DVD-quality surround sound in Blu-ray discs.  Advanced coding efficiencies facilitate BD-Live and Bonusview playback and enable rich surround sound audio from digital broadcast,IPTV,and streamed and downloadable media.

Dolby Digital Pro Logic II

Dolby Headphones
In conventional headphones, sound is directed into the listener’s ears from two sides in order to preserve the stereo effects from the speakers. The Dolby Headphone, however, generates signals that more closely emulate surround sound from the speakers to give you a more realistic multi-channel sound effect through your headphones. It supports Dolby Pro Logic, Pro Logic II, and Dolby Digital as well as stereo and multi-channel signals. Dolby Headphone reproduces the sonic experience you receive through your speakers from stereo or multi-channel sources. It provides three distinct modes: o DH1: Referred to as Dolby Headphone “Reference Room,” this mode recreates a small, acoustically “dry” room, well-suited to both music and movie programs. o DH2: This mode has an acoustically softer effect than DH1, and is best suited for music recordings. o DH3: This mode gives a greater sense of distance and sonic dispersion to create a large room such as a concert hall or movie theatre.

Dolby Noise Reduction
The Dolby noise reduction system substantially reduces the tape background noise (hiss) inherent in the cassette medium. Tape background noise consists primarily of high frequency information, which is particularly annoying during soft passages. The Dolby NR system increases the level of low volume mid and high-frequency signals during recording and reduces the level of these signals by an identical amount during playback. As a result, the playback signal is identical to the original source, but the level of background noise generated by the tape is greatly reduced.

Dolby Pro Logic II
Dolby Pro Logic II is a new multi-channel playback format developed by Dolby Laboratories using feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve surround sound. Dolby Pro Logic II offers a wider band range (20 Hz to 20 kHz or greater) and the surround channels are played as stereo signals. Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding.

Dolby Pro Logic IIx
Dolby Pro Logic IIx furthers the matrix decoding technology of Dolby Pro Logic II to decode audio signals recorded on two channels up to 7.1 playback channels, including the surround back channel. Dolby Pro Logic IIx also allows 5.1-channel sources to be played in up to 7.1 channels. The mode can be selected according to the source – Music mode is best suited for playing music, Cinema mode for playing movies, and Game mode for playing games.

Dolby True HD
True high definition sound, identical to studio masters. Provides up to 7.1 channels of pristine lossless audio playback 100 percent of the time.

Dolby Virtual Speaker
Dolby Virtual Speaker technology simulates a highly realistic 5.1-speaker surround sound listening environment from two speakers. It also creates a wider two-channel environment during playback of stereo CDs and MP3s, and when combined with Dolby Pro Logic II processing, delivers a virtual surround listening experience from any high-quality stereo source. More than a simple "expanded stereo" performance, Dolby Virtual Speaker incorporates highly advanced algorithms and extensive room-modeling technologies to reproduce the sonic spectrum and dynamics of a properly placed 5.1-speaker system in a room.

dts 96/24
DTS-ES® is used to describe 6.1 channel extended surround sound. DTS Neo:6 is used to describe our matrix technology that takes any 2-channel source material and emulates an immersive surround sound experience using a multi-channel surround sound system. DTS 96/24 is used to describe the high resolution technology featuring 96 kHz sampling rate and 24-bit word length

dts Digital Surround
dts Digital Surround (also called simply dts) is a multi-channel digital signal format developed by Digital Theater Systems. dts is a 5.1-channel surround sound format that is available in movie theaters, and as an optional soundtrack on some DVD-Video movies for home theater viewing. The primary advantage of dts is that it offers higher data rates, leading many home theater enthusiasts to claim the sound quality for movie or music audio tracks to be closer to the original master recordings.

dts Neo:6 Cinema
This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB) channels.

dts Neo:6 Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field.

dts Neo:6 surround
This mode applies conventional 2-channel signals to the high precision digital matrix decoder used for dts-ES Matrix 6.1 to achieve 6.1-channel surround playback. High precision input signal detection and matrix processing enable full band reproduction (frequency response of 20 Hz to 20 kHz or greater) for all 6.1 channels, and separation between the different channels is improved to the same level as that of a digital discrete system. dts Neo:6 surround includes two modes for selecting the optimum decoding for the signal source – dts Neo:6 Cinema and dts Neo:6 Music

dts-ES Discrete 6.1
dts-ES Discrete 6.1 is one of the newest recording formats, with all 6.1 channels (including the SB channel) recorded independently using a digital discrete system. Since each of the surround channels are fully independent, the sound can be designed with total freedom to achieve a sense that the acoustic images are moving about freely among the background sounds surrounding the listener from 360 degrees. Though maximum performance is achieved when sound tracks recorded with this system are played using a dts-ES decoder, when played with a conventional dts decoder the SB channel signals are automatically down-mixed to the SL and SR channels, so none of the signal components are lost.

dts-ES Extended Surround
dts-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems. Used professionally in movie theaters since 1999, dts-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals. In addition to the 5.1 surround channels, dts-ES Extended Surround also offers Surround Back, sometimes also referred to as “surround center” channel for surround playback with a total of 6.1 channels. dts-ES Extended Surround includes two signal formats with different surround signal recording methods, dts-ES Discrete 6.1 and dts-ES™ Matrix 6.1.

dts-ES Matrix 6.1
With this format, the additional SB channel signals undergo matrix encoding and are input to the SL and SR channels beforehand. Upon playback they are decoded to the SL, SR and SB channels. The performance of the encoder used at the time of recording can be fully matched using a high precision digital matrix decoder developed by dts, thereby achieving surround sound more faithful to the producer’s sound design aims. In addition, the bit stream format is 100% compatible with conventional dts signals, so the effect of the Matrix 6.1 format can be achieved even with 5.1-channel signal sources.

DTSHD Master Audio
DTS-HD Master Audio™ delivers multi-channel audio that is bit-for-bit identical to the studio master and delivers the ultimate high definition sound experience.

Dual Discrete Video Circuit (D.D.V.C.)
Not only does Denon separate audio and video circuitry in its DVD players to maintain high sound and picture quality, the interlaced, progressive and SCART video output circuits are also arranged independently of each other. Isolated circuits and boards, the use of a box chassis and even the encoder chips (in high end models) are all exclusively dedicated to individual tasks to minimize mutual interference and ensure optimum picture quality.

DVD-Audio (DVD-A)
DVD-A is the audio version of a DVD. It uses an extended version of PCM technology and provides high frequency response to 96 kHz (slightly less than SACD) and a 144 dB dynamic range (greater than SACD). Conventional DVD players will not play the high definition data contained on a DVD-A disc.

DVD-Audio/Video
Playback of media from standard "DVD Video" & "DVD-Audio" disc's.

DVDO
DVDO is a high precision 10-bit professional scaler that executes the optimum conversion to suit the output of the independent HDMI and DVI transmitters and provides Color Space Conversion for RGB signals. Parallel Video Outputs (Digital and Analog) are included such that both HDMI and DVI-D can output the selected scaling rate simultaneously with 480p/576p via a component. Developed by Anchor Bay Technology (ABT), it has an excellent reputation for high quality video technology.

DVI (Digital Video Interface)
DVI specifies ways to get analog and/or digital video signals to a monitor with a single connector. DVI comes in three flavors: DVI-A for analog signals; DVI-D for digital signals, and DVI-I (or Integrated) for both analog and digital signals. Using a DVI connection, a digital signal sent to an analog display device is converted into an analog signal. If the display can receive a digital signal (e.g., flat panel displays), no digital-to-analog conversion is necessary.

DVI-D Output (HDCP)
Digital Voice Integrated (DVI-D) is used for direct digital connections between source video (Denon DVD players) and digital LCD, plasma and LCD projectors. This provides a faster, higher-quality image than with analog, due to the nature of the digital format. Outputting this signal to a display eliminates any loss of quality due to conversion.

Dynamic Discrete Surround Circuit (D.D.S.C.-Digital-Circuit)
D.D.S.C.-Digital-Circuit is used for high-quality Sound Reproduction. It is a circuit configuration specially designed by Denon in which all elements of the surround processor are optimized through the use of selected high-performance discrete components, including separate A/D and D/A converters, with sophisticated DSP surround decoding.

EL-Touch-Panel Remote Control
This remote control utilizes an electroluminescent display, similar to the technology employed by LCD backlights. On this Denon remote, the luminous blue color of the buttons is the backlight being allowed through the insulating surface that covers the remote’s functions. Each function, or button, has its own parent EL area and is configured to allow different buttons to become lit when certain modes are engaged.

Fuji Color CD Compatible
DVD players that have the Fuji picture CD compatible logo, have been tested and certified by Fuji to ensure that an enjoyable viewing experience is provided. You can view your picture CD on these DVD players.

GLO-KEY Technology
The keys on the remote control are made of fluorescent glow in the dark material to allow for easy use in dark rooms. On the remotes for the Denon amplifiers and DVD players, the important keys have been highlighted with the GLO-Key technology. Some of the remotes have also a backlight that illuminates the keys on touch of the remote.

HD Radio
Enables the reception of high-quality digital AM and FM stations. Broadcast simultaneously with traditional analog signals, HD Radio signals provide crystal-clear CD-quality sound, program information (e.g. artist, song title, station, etc.), and multiple channels of programming  on the same FM frequency.

HD Radio-Ready
The HD Radio-Ready logo means that this product has been designed to be upgradeable with HD Radio reception. HD Radio™ technology enables the reception of high-quality digital AM and FM stations. Broadcast simultaneously with traditional analog signals, HD Radio signals provide crystal-clear CD-quality sound, program information (e.g. artist, song title, station, etc.), and multiple channels of programming (aka multicasting) on the same FM frequency … all subscription free. Over 1,600 U.S. HD Radio stations are now on the air, with more than 800 offering additional content via multicast channels. To find your local HD Radio stations, please visit http://www.hdradio.com.

HDCD (High Definition Compatible Digital)
HDCD is an encoding/decoding technology that encodes with 20 bits of real musical information, as compared with 16 bits for all other CDs, greatly reducing the distortion that occurs upon digital recording, while maintaining compatibility with conventional CD formats. HDCD overcomes the limitation of the 16-bit CD format by using a sophisticated system to encode the additional 4 bits onto the CD while remaining completely compatible with the existing CD format. HDCD provides more dynamic range, a more focused three-dimensional soundstage, and extremely natural vocal and musical timbre to achieve the highest resolution. With HDCD, you get the body, depth, and emotion of the original performance not a flat, digital imitation

HDMI (High Definition Multimedia Interface)
This is a digital interface standard for next generation television developed based on the DVI (Digital Visual Interface) used for computer displays and optimized for use in non-professional equipment. With it, non-compressed digital video and multi-channel audio signals can be transferred with a single connector, eliminating the need to use separate cables for picture and sound and making it possible to make connectors smaller. HDMI is compatible with HDCP (High-bandwidth Digital Contents Protection), a technology for protecting copyrights that encrypts digital video signals.

High Current (HC) Transistors
The highly responsive HC transistor doubles the capacity of conventional transistors to faithfully reproduce even the most dramatic transitions between high and low-level signals with negligible sound distortion. The improvement in musical expression is audibly noticeable.

Hollywood Quality Video
HQV is a new benchmark standard of video excellence created through a partnership between Silicon Optix and Teranex and has recently received an Emmy award in 2007 for its video processing achievements. HQV represents the integration Teranex‘s broadcasting platform and software algorithms – refined over 100,000 hours of content verification for the industry’s highest level of quality – into Silicon Optix’ Realta chip – the industry’s first fully software programmable video array processor capable of performing over 1 trillion operations per second, with an Image Fidelity Enhancement Engine and end-to-end true 10-bit image processing. These core technologies combine together to enable the simultaneous processing of dual high-definition image streams for home entertainment and professional video display products. Denon DVD players are the world’s firsts to incorporate this innovative HQV technology.

HQV
HQV is a new benchmark standard of video excellence created through a partnership between Silicon Optix and Teranex and has recently received an Emmy award in 2007 for its video processing achievements. HQV represents the integration Teranex‘s broadcasting platform and software algorithms – refined over 100,000 hours of content verification for the industry’s highest level of quality – into Silicon Optix’ Realta chip – the industry’s first fully software programmable video array processor capable of performing over 1 trillion operations per second, with an Image Fidelity Enhancement Engine and end-to-end true 10-bit image processing. These core technologies combine together to enable the simultaneous processing of dual high-definition image streams for home entertainment and professional video display products. Denon DVD players are the world’s firsts to incorporate this innovative HQV technology.

IEEE 1394
Also known as FireWire, IEEE 1394 is a standard for high-speed serial connections approved by the Institute of Electrical and Electronic Engineers. The standard is designed for the exchange of information between PCs and consumer electronics devices that transfer large amounts of data, such as digital camcorders or VCRs.

JPEG
This digital picture format was developed by the Joint Photographic Experts Group. JPEG files are compressed at varying degrees, but they still render detail and color better than competing file formats, like GIF files. JPEG files are smaller and thus download more quickly.

Kodak Picture CD-compatible
DVD players that have the Kodak picture CD compatible logo, have been tested and certified by Kodak to ensure that an enjoyable viewing experience is provided. You can view your picture CD on these DVD players.

Lip Sync Circuitry
Lip sync circuitry ensures that audio and video remain visibly in step during DVD playback. It is particularly important when you are watching video with “fixed pixel” technology found in today’s plasma, LCD, or DLP devices that often require extensive “scaling” to match the source and the screen. Lip Sync lets you synchronize audio and video so that sound reaches your ears when your eyes say it should.

Made For iPod
The Made for iPod mark signifies that this product has been designed to work with iPod devices either through docking stations or connection cables. Available features will be dependant on the products used.

MLP-Decoding
Meridian Lossless Packing (MLP) is an audio coding format that enables the highest possible sound quality and integrity in delivery or storage of high-quality audio. MLP has been adopted as the mandatory coding system to deliver the highest quality sound on DVD-Audio and other formats.

MP3 (MPEG 1, Audio Layer 3)
MP3 is considered one of the most popular codec (encoder/decoder) for storing and transferring music. Though it employs a "lossy" compression system that removes signal components judged to be inaudible, MP3 still manages to deliver reasonable sound quality in files that are 80 to 90% smaller than comparable uncompressed WAV files. You can select varying amounts of compression when creating MP3 files.

Multi-Room Entertainment System
Denon’s Multi Source function lets you select different audio sources for listening in different locations (some models may have volume adjust only for zone 2). Different sources can thus be enjoyed in the main room (MAIN) and sub-room(s) – ZONE 2, ZONE 3 or ZONE 4 – simultaneously (number of zones is model dependent). For additional information, check the instruction manual of the A/V receiver or power amplifier of interest for complete functionality.

network
The Network symbol is Denon's commitment to expanding the home audio experience and indicates this Denon product can be connected to a LAN network.

Neural Surround
Neural Surround™, a breakthrough in audio technology, brings the excitement of surround music to more of America’s listening audience. It provides the rich envelopment and discrete image detail of surround sound in a format 100 % compatible with stereo. With superior spectral resolution and channel separation, Neural Surround™ draws the brain’s attention to sonic details in musical instruments, vocals, and ambience that are typically masked by other playback systems. This allows the listener to fully experience the richness and subtleties in recorded performance as never before. Neural Surround™ is the chosen format for XM Satellite Radio’s new XM HD surround programming.

Noise Shaped Video (NSV)
The NSV precision video feature works in the digital domain to reduce noise in the video signal frequency band in order to enhance video signal linearity, provide the most accurate signal representation, and enhance the picture quality. Noise shaping techniques can be combined with dynamic element matching techniques in order to reduce the matching requirements of DAC elements by converting the analog mismatch into out of band noise. This approach of dynamic element matching and noise shaping has been shown to allow the use of sigma delta modulation at video data rates. NSV is the only product on the market that can achieve ultimate precision with 12-bit fidelity in both digital-to-analog and analog-to-digital domains.

On Screen Display (OSD)
An on-screen display (OSD) is a control panel on a computer monitor or television screen that allows you to select viewing options and/or adjust components of the display, such as brightness, contrast and input and output settings. On a Plasma, LCD or even a Projector screen, it can usually be activated either through buttons on the television set itself or through the remote control. On-screen displays from DVD players and amplifiers are becoming increasingly complex and interactive. Connecting any type of video connection between Denon DVD players and amplifiers will bring up an OSD on the screen you are using. In some cases you have more controllable features listed on the OSD than the menu on the units display.

Personal Memory Plus
Personal Memory Plus is a function that allows a receiver to store the surround modes, the level setting for all speakers, and the delay time to further customize the sound source. With the push of a button, the receiver will be turned to the source of choice and the preset settings will be activated.

Photo Disc
Developed by Kodak, the Photo CD places images on CD-R discs for long term storage. The disc holds each image in several layers of resolution such that you can work with lower-resolution images on-screen, and then use the highest resolution version (over 6 million pixels) for output.

Progressive Scan
Progressive Scan technology represents a vast improvement over the interlaced scanning method used in TV broadcasts and other conventional applications. It can process approximately twice as much video data to produce a sharper, noise-free image with finer details. High-definition video images are faithfully displayed with optimum naturalness and beauty.

Pure Direct Mode
According to the selected input source, the Pure Direct Mode provides the optimum decoding by switching off any and all unnecessary circuitry (video disable, tone bypass, etc). Listening to SACD or DVD-Audio via analog connections is the best way to utilize the Pure Direct feature.

Radio Data System (RDS)
RDS is a standard for sending small amounts of digital information using conventional FM radio broadcasts. Widely used in Europe, but less so in North America, the RDS system standardizes several types of information transmitted, including time and station identification. Radio Broadcast Data System is the official name for the U.S. version of RDS, though the "RDS" name seems to be at least as common in usage. The two standards are nearly identical, with only slight differences, mainly in which numbers are assigned to each of 31 musical and other program formats the RBDS system can identify. Both use a 57 kHz sub-carrier to carry data at 1187.5 bits per second to prevent interference or inter-modulation.

Radio Text
RDS tuners with Radio Text can receive short messages which might include information about the presenter, station or program you are listening to. The information will scroll across the display on a home tuner and on some car tuners.

Rhapsody
A subscription-based online music service from Real Networks that gives users unlimited access to a vast library of major and independent label music. Within a single interface, Rhapsody provides access to streaming music, Internet radio and extensive music information and recommendations. A subscription is required.

SHARC
32-bit Floating Point DSP Hammerhead Sharc, the latest DSP from Analog Devices, is used for decoding to further boost digital signal processing capability and provide the highest dynamic range. Faster processing speed results in more complete surround decoding.

Signal Level Divided Construction (S.L.D.C.)
The Signal Level Divided Construction (S.L.D.C.) chassis is used in the audio circuit to ensure that delicate musical signals from such advanced digital sources as DVD and CD are faithfully amplified and transmitted to the speakers.

Sirius Ready
SIRIUS XM delivers the best commercial-free music, plus all the top professional and college sports, expert sports talk, uncensored comedy and entertainment, news from the most trusted sources and local traffic and weather

SRS TruSurround
SRS TruSurround processes any multi-channel audio source, as is usually found on DVDs, and transforms the material into virtual surround sound from just two speakers or headphones.

Super Audio CD (SACD)
SACD is a next generation music format that provides more natural, ultra-high quality reproduction of both stereo and multi-channel music. SACD specifications allow a hybrid disc with high-density DSD information on one layer and CD-quality information on another layer, allowing you to play hybrid discs in both an SACD player and a conventional CD player. SACD format is based on DSD (Direct Stream Digital) technology which uses a 1-bit data stream with a sampling frequency 64 times higher than a CD. SACD offers high frequency response to 100 kHz and a dynamic range of 120 dB throughout the audible range. Conventional CDs are limited to a high frequency limit of 22.05 kHz (1/5 that of the SACD) with a maximum dynamic range of 96 dB.

Super-Sub-Alias Filter
The Super-Sub-Alias-Filter feature produces a flat characteristic, ensuring that adverse influences do not affect video signals inside the essential frequency band, and folding noise is eliminated. It is applied to the chroma signal as well as the luminance signal to improve color reproduction.

S-Video
Short for Super-Video, S-Video is video signal format that transmits color (chrominance) and brightness (luminance) separately over two different conductors within one cable. It generally produces sharper images than composite video because televisions are designed to display separate Luminance (Y) and Chrominance (C) signals.

THX
THX is an independent company that promulgates a set of standards originally developed when the company was a division of Lucasfilm Ltd. These standards were established to ensure home theater systems reproduce movie soundtracks just as they were heard at the ”dubbing stage” where the soundtracks are created. Various standards cover processing, amplification, and loudspeaker performance. In addition, other THX standards cover DVD player performance, wire and cable performance, even DVDs themselves.

THX Ultra
THX Ultra certification is given to components that meet the THX performance standards for larger home theater environments (up to 3,000 cubic feet). Theoretically, if you have a home theater environment that is 2,000 cubic feet or less, THX Select receivers and loudspeakers should deliver approximately the same presentation standards as the higher-end THX Ultra components.

THX Ultra2
THX Ultra2 Cinema Mode produces appropriate sound field effects when 5.1 channel movie sources (without Dolby EX or dts-ES encoded effects) are played in a 7.1 channel system. With the advent of very high speed digital processing, more sophisticated trimming is applied to accurately recreate a large theatre-type sound in a conventional home cinema size room. Advanced processing widens the rear soundstage, which allows the side surrounds to deliver predominantly ambient information, the “surround-back” channels directional information. Likewise, the THX Music Mode produces appropriate sound field effects for Dolby Digital, dts, and other 5.1 channel music sources when they are played in a 7.1-channel system.

Ultra High Current (UHC)-Single-Push-Pull Circuit
This feature supports low impedance speakers for power amps. It combines high output power with detailed musical expression, a high grade solution that is the first of its kind. Ultra High Current MOS amplifies with dynamic strength and absolute clarity the creative energy transmitted by the artist and to keeps apace with the ever-changing musical signal levels. A hefty power supply unit with ample reserves and a power amp capable of supplying pure, dynamic signals to the speakers so that the music is heard with absolute transparency are the primary requirements.

Video Up-conversion
This is a process in which lower definition video signals (the 480p signal from a DVD player, for example) is processed or “scaled” for output as a 720p or 1080i signal. An up-converted signal does not contain any additional information than what is in the original source, but the display format is changed to appear better on a display device with higher resolution capability than the source.

Virtual-Surround
This feature allows a sensational surround three-dimensional sound field to be created using just one pair of speakers. Denon amplifiers with Virtual Surround mode provides a dramatic psychoacoustic surround sound effect, using two speakers with Dolby Digital 5.1 encoded sources.

wifi
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi Alliance, a group certifying interoperability among wireless LAN devices. IEEE 802.11b is one wireless LAN standard and IEEE 802.11g is another wireless LAN standard set by the 802 working group that establishes LAN technology standards at the IEEE (Institute of Electrical and Electronics Engineers) of the United States. 802.11b uses the 2.4 GHz band usable freely without a radio frequency license (ISM band), enabling communications at a maximum speed of 11 Mbps. 802.11g is compatible with IEEE 802.11b and it also uses the 2.4 GHz band, but enables communications at a maximum speed of 54 Mbps.

WMA (Windows Media Audio)
WMA is an audio compression format developed with Microsoft technology. It claims to offer the highest quality sound available in the industry. Becoming a standard audio compression format, rivaling the popularity of MP3, WMA is used to compress a music CD on a computer with an equivalent quality of sounds to that of the original CD (when using Encoder 9).

XMHD
XMHD delivers the best commercial-free music, plus all the top professional and college sports, expert sports talk, uncensored comedy and entertainment, news from the most trusted sources and local traffic and weather.

XM-Ready
XM Radio ready receivers offer enhanced features over traditional radio receivers as their source is broadcast from a digital satellite. An optional plug and play XM antenna and service contract is required to active the XM Radio feature.