 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
 |
|
|
|
Health Effects
|
|
| Caution: In case of eye contact, flush with water for 15 minutes, call a physician. Sealant releases acetic acid during cure. Avoid prolonged skin contact. Do not puncture, incinerate or store above 120 deg F. Exposure to heat or sunlight may cause bursting. Keep out of reach of children. |
From MSDS
Inhalation: Acetic acid produced during cure irritates eyes, nose, and throat.
Eye Contact: Eye irritant.
Skin Contact: Prolonged or repeated contact may irritate skin.
Ingestion: Moderately toxic by ingestion.
|
From MSDS
None listed. Exposure to methyltriacetoxysilane may aggravate existing eye, skin, and pulmonary disorders.
|
From MSDS
None of the ingredients in this product is listed as a carcinogen by NTP, IARC, or OSHA. No California Proposition 65 chemicals are known to be present.
|
| 2 |
| 1 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1996-01-22 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Store in a dry area below 90oF. Keep container closed when not in use. Avoid breathing vapor. Avoid eye or skin contact. Acetic acid vapor released during application and cure. Do not wear contact lenses while applying material. Vapor may be trapped under lens.
|
From MSDS
Cured rubber scrap can be incinerated. Follow EPA and local regulations.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
