 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
|
 |
|
|
|
Health Effects
|
|
| Do not freeze. DANGER! HARMFUL OR FATAL IF SWALLOWED. PRECAUTIONS: Protective clothing and eye wear should be used during application of these products. When transporting this product, ensure that cap is tight and jug is secure and upright. Do not allow jug to tumble as this may cause cap to loosen and leakage to occur. Do not store at temperatures above 100 deg F. Do not reuse empty container. Dispose of properly. Bar Code: 0-25056-05510 |
From MSDS
No acute effects listed. Medical Conditions Generally Aggravated by Exposure: Persons with history of diseases in the liver, skin, eye, respiratory system, blood forming organs or with bleeding abnormalities or exposure to material harmful to these systems are at greater risk than normal risk of developing adverse health effects when working with this product.
|
From MSDS
Breathing asphalt aerosol or asphalt smoke for protracted periods of time has produced damage to the lungs of mice. Among the changes observed were: bronchitis, pneumonitis and abscess formation.
|
From MSDS
The International Agency for Research on Cancer has determined there is limited evidence of carcinogenicity for undiluted steam-refined asphalts in animals and adequate evidence of carcinogenicity for undiluted steam-refined asphalts in humans. Chromium and chromium compounds are listed as potential carcinogens as determined by the IARC.
|
| 2 |
| 1 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1993-10-19 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Keep all containers tightly closed and in a properly ventilated area.
"Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize cut, weld, braze, solder, drill, grind or expose such containers to heat, flame, sparks, or other sources of ignition. Do not attempt to clean since residue is difficult to remove. For work on tanks, refer to OSHA regulation ANSI Z49.1 and other governmental and industrial references pertaining to cleaning, repairing, welding or other contemplated operations.
|
From MSDS
Dispose of in an environmentally safe manner and in accordance with governmental regulation. "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Dispose of accordingly.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
