The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
(Complete MSDS for this product)
Health Effects
Acute Health Effects:
From MSDS
HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes Eye? Yes
Acute Health Hazards
Skin Contact: N/A
Eye Contact: Corrosive in accordance with FHSLA regulations.
Ingestion: Toxic orally in accordance with FHSLA regulations.
Inhalation: Produces irritation by inhalation, in accordance with FHSLA regulations.
Chronic Health Effects:
From MSDS
Prolonged over ingestion might increase liver copper content.
Carcinogenicity:
From MSDS
No information provided.
First Aid:
From MSDS
Skin Contact: Wash or shower thoroughly with water. Remove and wash contaminated clothing before reuse.
Eye Contact: Flush immediately with plenty of water for at least 15 minutes, hold eyelids apart during irrigation. Seek medical attention.
Ingestion: Drink a large quantity of water or milk. Get medical attention.
Notes to Physician: Probable mucosal damage may contraindicate the use of gastric lavage. Measures against circulatory shock, respiratory depression and convulsion may be needed.
Inhalation: Remove worker from exposure and seek medical aid.
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard
MSDS Verified Date:
2008-01-02
MSDS Date:
2003-01-03
Handling/Disposal
Handling:
From MSDS
Precautions to be taken in handling and storing: No special precautions are known other than those stated on the bottle and in this Material Safety Data Sheet. Under some conditions copper sulfate dust may be irritating to the skin of some individuals. Problem use conditions seem to be aggravated by high humidity and sweating when copper sulfate is applied undiluted and dust contact occurs.
Other Precautions: Store product in a dry place.
Disposal:
From MSDS
If product is in confined solution, introduce lime or soda ash to form insoluble copper salts and then dispose of in an approved landfill.