Backs & Lifting Training Guide
(Taken from the "Tailgate Meetings that Work : A Guide to Effective Construction Safety Training" series)  PDF Version
LOHP Logo

Versión en español

Robin Baker, Robert Downey, Mary Ruth Gross, Charles Reiter
Labor Occupational Health Program (LOHP) School of Public Health,
University of California, Berkeley Ca.

These tailgate/toolbox talks were developed for use under California OSHA regulations. The complete set is available from the Labor Occupational Health Program at UC Berkeley. For ordering information, visit the website (www.lohp.org) The American Conference of Government Industrial Hygienists (ACGIH) has adapted these talks to apply to federal OSHA regulations. To contact ACGIH, visit its web site (www.acgih.org).

    Before you begin the meeting...

  • Does this topic relate to the work the crew is doing? If not, choose another topic.

  • Did you read this Training Guide and fill in the blanks where thePencil Icon appears? (To find the information you need, look over the Safety Walkaround Checklist for this topic.)
  • Did you bring a large object (such as an empty box) so you can demonstrate lifting techniques at the meeting?

Begin: Watch your back! Abusing it can cause painful and even permanent injuries. Construction workers miss work because of back injuries more than any other reason. Your back can slowly get worse or can suddenly “go out.” Either way, the results are the same—a lot of pain and you’re off work! So let’s talk about how to protect your back.

You or a crew member may want to add a personal story about back injuries.

ASK THE CREW THESE QUESTIONS:

After each question, give the crew time to suggest possible answers. Use the information following each question to add points that no one mentions.

1. What are some common causes of back injuries in construction?

  • Lifting materials that are too heavy or unstable
  • Lifting objects to or from awkward locations (for example, placing overhead or lifting from the ground)
  • Repetitive twisting, bending, reaching overhead, or lifting
  • Working for long periods in a bent over or strained position
  • Falling
  • Tripping over debris.
  • Wearing tool belts that are too heavy
  • Lifting or doing any physical labor when you haven't "warmed up."

2. How can you avoid back injuries on the job?

The best way is to plan the job to reduce the need for lifting, twisting, bending, or reaching overhead. Change how the job is done, or change the tools you use. Here are some examples.

  • Store materials off the ground, so you don’t have to bend so much to lift.
  • Store materials where there is space to lift them safely, without reaching or twisting.
  • Have materials delivered close to where they will be used.
  • Split up large loads into smaller, lighter loads.
  • Change the setup of the job. (Perhaps adjust the angle and height of work surfaces.)
  • Use a manual lifting or carrying device (like a dolly, hand truck, pry bar, or hook).
  • Use a mechanical lifting device (like a forklift, hoist, crane, or block and tackle).
  • Use tools that minimize bending and reaching (like tools with longer handles).
  • Make sure walkways are kept clear to allow the use of material handling devices like carts and dollies.

3. Step-by-step, how do you lift a heavy object safely? Tell me how to do it.

Remember that proper lifting techniques cannot protect you if the object is too heavy, awkward to hold, or cannot be held close to the body.

    The instructor should demonstrate the steps below. Use an empty box or something similar (not an object that’s very heavy). Have the crew suggest correct techniques for lifting the object and for setting it down. Demonstrate these techniques as the crew instructs you.

  • Face the object. Place one foot behind the object and the other foot beside it.
  • Bend your knees but keep your back straight. Grip the object firmly with both hands.
  • Bring the object close to your body. Keep your chin, elbows, and arms tucked in tight. Keep your body weight directly over your feet.
  • Lift with your legs.
  • Do the same process in reverse when you set the object down.
  • Avoid any twisting motions.

4. What about back support belts? Are they a good way to protect yourself?

Most research says that back belts will not protect you from back injuries.

  • They can give you a false sense of security, so you try to lift too much weight.
  • Leaving the belt tightened for long periods can actually increase your chances of being injured when you have to lift without the belt.
  • People who wear belts have more upper back injuries.
  • Belts can be hazardous for people with high blood pressure.
  • A belt should never be a substitute for designing the job to minimize manual material handling. Instead of a belt, use mechanical lifting when possible. If you must lift manually, proper lifting techniques protect you better than a belt

5. What are some tasks on this job that could be bad for your back? And what can we do to make these tasks safer?

Pencil Icon

Back Hazards

_________________________

_________________________

Solutions

_____________________

_____________________

6. According to Cal/OSHA, we must have a written Injury and Illness Prevention Program (IIPP) for the site. Back and lifting hazards are included in our IIPP. Do you know what our IIPP says about them?

  • The company will inspect the job site for all health and safety hazards, including back and lifting hazards.
  • We will take steps to reduce any hazards, where feasible.
  • We will investigate accidents that cause back injury.
  • We will provide needed safety equipment, like manual and mechanical lifting devices.
  • We will maintain safety equipment in good condition, and keep it close to the work being done.
  • We will give you training.

CAL/OSHA REGULATIONS

Explain: The safety measures we’ve talked about are included in our company’s Injury and Illness Prevention Program (IIPP), as required by Cal/OSHA. At this time, there are few specific Cal/OSHA regulations on back hazards or lifting. However, Cal/OSHA did recently adopt a new ergonomics standard designed to reduce repetitive motion injuries. On any construction job, if there has been more than one ergonomic injury within a year to workers doing the same task, the company must take steps to

identify and correct these hazards. We must also provide relevant training. I have a Checklist of recommended safety measures. If you'd like to know more, see me after the meeting.

COMPANY RULES

(Only if applicable.) We have some additional company rules to prevent back injuries.

Pencil Icon

Discuss company rules:_______________________________

__________________________________________________

COMMENTS FROM THE CREW

Ask: Do you have any other concerns about back injuries or lifting? Do you see any problems on our job? (Let the steward answer first, if there is one.)

What about other jobs you’ve worked on? Have you had any experience with back injuries or lifting that might help us work safer on this job?

Sign Off Form
BACKS and LIFTING

Date Prepared:______________________ By:____________________
Project Name/No.___________________ Location:_______________
NAMES OF THOSE WHO ATTENDED THIS SAFETY MEETING
Printed Name
Signature
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

Tailgate Meetings That Work : Collection



Published in June, 1994 by: Labor Occupational Health Program, School of Public Health, 2515 Channing Way, University of California, Berkeley, CA 94720. Phone: (510) 642-5507.

Permission is granted to duplicate these materials for non-profit educational purposes, provided that copies are not offered for sale.


This paper appears in the eLCOSH website with the permission of the author and/or copyright holder and may not be reproduced without their consent. eLCOSH is an information clearinghouse. eLCOSH and its sponsors are not responsible for the accuracy of information provided on this web site, nor for its use or misuse.


 eLCOSH | CDC | NIOSH | Site Map | Search | Links | Help | Contact Us | Privacy Policy



Other Job Site Trade Hazard Site Map Search Spanish Items Help Links Contact eLCOSH Non-English Materials Training Materials NIOSH Home CDC Home eLCOSH Home