This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued.
This notice is being issued as an RFQ.
QD Requirements:
Specifications: QDs must meet SAE AS25427 with additional requirements as indicated below.
Fluid Medium: QDs shall be compatible with the hydraulic fluid Mil-PRF-83282.
Working Pressure: QDs must be able to withstand working pressures as shown in the table below. The working pressure requirement of 3200 psi is higher than the stated requirement of 3000 psi in the AS25427 specifications.
Vacuum: The vacuum test level shall be 29.7 in. Hg, which is higher than the stated requirement in the AS25427 specifications.
Flow rate: Both the 5/8” and 3/4” connectors in system shall be capable of a flow rate of up to 18 gpm. 1/4” QDs shall meet flow and pressure drop requirements of AS25427.
Delta P: Pressure drop across QD shall be no greater than 20 psi at 18 gpm.
Operating Temperature: The QDs shall be able to operate within a temperature range of -40° F to +275° F
Quantities: Please quote both of the quantities in the table below for the following coupler components:
QD Diameter and gender Working pressure
Minimum Quantity Maximum Quantity
1/4” female 3200 psi 6 10
1/4” male 3200 psi 10 26
5/8” female 3200 psi 4 6
5/8” male 3200 psi 6 14
3/4” female 150 psi 4 6
3/4” male 150 psi 6 14
total 36 76
Material: Stainless Steel
Mounting: male QDs need to be able to be mounted on a panel. Panel-mounted QDs will have male bulkhead end connections
End Connection:
-Male bulkhead 37° flare connection with AS1098 fitting end with seal ring per AS1097ring (tube end needs some sealing capability besides metal to metal contact) If this is not possible male 37° flare connection per AS4396 will be considered.
-Hex nut must accompany male bulkhead QD and must be drilled for lockwire.
- Female half of coupling must have end connection per AS1098 or MS33656.
Pressure Caps: Pressure caps must accompany male connectors.
Pressure caps shall be rated for the same working pressure as the connector.
Dust Plugs: Dust plugs must accompany female connectors.
Cleanliness Requirements:
Cleanliness: In addition to the AS25427 requirements, the couplings must meet IEST-STD-CC1246D level 100. The following cleanliness standards/levels are considered acceptable alternatives for this application: SAE AS4059 class 5, or ISO 4406 level 3/10.
If the vendor cannot provide the above cleanliness level, the coupling must be able to be flushed without being taken apart.
Delivery Requirements:
Delivery Date: NASA’s anticipated need date is approximately December 31, 2008
[
The provisions and clauses in the RFQ are those in effect through FAC 2005-06.
The NAICS Code and the small business size standard for this procurement are 332912 and 500 respectively. The offeror shall state in their offer their size status for this procurement.
All responsible sources may submit an offer which shall be considered by the agency.
Delivery to NASA GLENN RESEARCH CENTER is required within 90 days ARO. Delivery shall be FOB Destination.
Offers for the items(s) described above are due by noon, 9-8-08 to NASA GLENN RESEARCH CENTER, MS 500-306, 21000 BROOKPARK RD, CLEVELAND, OH 44135 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL:
http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml
Offerors shall provide the information required by FAR 52.212-1 (JUNE 2008), Instructions to Offerors-Commercial Items, which is incorporated by reference.
If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin.
FAR 52.212-4 (FEB 2007), Contract Terms and Conditions-Commercial Items is applicable.
FAR 52.212-5 (JUNE 2008), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable.
The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html
The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm
All contractual and technical questions must be in writing (e-mail or fax) to Konrad Mader not later than 9-3-08. Telephone questions will not be accepted.
Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Other critical requirements: Delivery on or before 12-31-08 shall also be considered. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)).
Offerors must include completed copies of the provision at 52.212-3 (JUNE 2008), Offeror Representations and Certifications - Commercial Items with their offer. These may be obtained via the internet at URL: http://prod.nais.nasa.gov/eps/Templates/Commercial_Greater_Than_25K.doc . These representations and certifications will be incorporated by reference in any resultant contract.
An ombudsman has been appointed -- See NASA Specific Note "B".
Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22 . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).
Any referenced notes may be viewed at the following URLs linked below.
