FDA Logo--links to FDA home page
U.S. Food and Drug Administration
HHS Log--links to Department of Health and Human Services website

FDA Home Page | Search FDA Site | FDA A-Z Index | Contact FDA | FDA Centennial


horizontal rule

Guidance for Industry and FDA Staff:
How to Write a Request for Designation (RFD)

For questions regarding this document, contact:
Leigh Hayes, Office of Combination Products, at 301-427-1934.

U.S. Department of Health and Human Services
Food and Drug Administration
Office of the Commissioner
Office of Combination Products

August 2005


Guidance for Industry and FDA Staff:
How to Write a Request for Designation (RFD)

The information collection provisions in this guidance have been approved under OMB control number 0910-0523. This approval expires February 28, 2007.

Public Comment

Written comments and suggestions may be submitted at any time for Agency consideration to the Division of Dockets Management, Food and Drug Administration, 5630 Fishers Lane, Room 1061, (HFA-305), Rockville, MD, 20852. When submitting comments, please refer to the exact title of this guidance document. Comments may not be acted upon by the Agency until the document is next revised or updated.

Additional copies are available from:
Office of Combination Products, HFG-3
Office of the Commissioner
Food and Drug Administration
15800 Crabbs Branch Way, Suite 200
Rockville, MD 20855
(Tel) 301-427-1934
(Fax) 301-427-1935

http://www.fda.gov/oc/combination

combination@fda.gov


TABLE OF CONTENTS

I. PURPOSE

II. GENERAL INFORMATION REGARDING PRODUCT JURISDICTION/ ASSIGNMENT OF SINGLE-ENTITY AND COMBINATION PRODUCTS

  1. What is a non-combination or “single-entity” product?
  2. Which Centers review non-combination or “single-entity” products?
  3. What is a combination product?
  4. What are some examples of combination products?
  5. How are combination products assigned for review?
  6. How do I determine which Center will review my combination or non-combination/ single-entity product?
  7. What is a Request for Designation, and at what point in product development
    should I submit it?
  8. How do I submit a Request for Designation for a combination or non-combination/
    single-entity product?
  9. How promptly will FDA review my RFD?
  10. May I withdraw my RFD after submission?
  11. What if I disagree with OCP’s jurisdictional determination?
  12. How can I contact OCP?

III. WHAT INFORMATION MUST I INCLUDE IN AN RFD?

  1. What information must I include in my RFD?
  2. What format should I follow for my RFD?
  3. How should my RFD be addressed?
  4. D. Does FDA accept electronic submissions for RFD’s?.
  5. What information does FDA recommend that sponsors provide in RFD submissions?
  6. How can I limit my submission to 15 pages including attachments as required by the
    regulation, and still provide all the information FDA needs to make its decision?.

IV. CONCLUSION

APPENDIX: RFD SCREENING CHECKLIST


Guidance for Industry and FDA Staff

How to Write a Request for Designation (RFD)

 

This guidance represents the Food and Drug Administration's (FDA's) current thinking on this topic. It does not create or confer any rights for or on any person and does not operate to bind FDA or the public. You can use an alternative approach if the approach satisfies the requirements of the applicable statutes and regulations. If you want to discuss an alternative approach, contact the FDA staff responsible for implementing this guidance. If you cannot identify the appropriate FDA staff, call the appropriate number listed on the title page of this guidance.

PURPOSE

This guidance is intended to clarify the type of information the Office of Combination Products (OCP) recommends that a sponsor include in a Request for Designation (RFD). The goal of this guidance is to help a sponsor understand the type of information FDA needs to determine the regulatory identity of a product as a drug, device, biological product, or combination product, and to assign the product to the appropriate agency component for review and regulation. This guidance reflects the final rule defining the primary mode of action of a combination product (PMOA Final Rule) published in the Federal Register on August 25, 2005. The PMOA Final Rule is effective November 23, 2005.

FDA's guidance documents, including this guidance, do not establish legally enforceable responsibilities. Instead, guidances describe the Agency's current thinking on a topic and should be viewed only as recommendations, unless specific regulatory or statutory requirements are cited. The use of the word should in Agency guidances means that something is suggested or recommended, but not required.

II. GENERAL INFORMATION REGARDING PRODUCT JURISDICTION/ASSIGNMENT OF SINGLE-ENTITY AND COMINBATION PRODUCTS

A. What is a non-combination or “single-entity” product?

A non-combination or “single-entity” product is a product that is either a drug, a device, or a biological product.

Section 201(g) of the Act defines a “drug” as an article intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, or an article (other than food) intended to affect the structure or any function of the body.

Section 201(h) of the Act defines a “device” as an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, including any component, part, or accessory, which is intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease, or which is intended to affect the structure or function of the body. A device may not achieve its primary intended purposes through chemical action within or on the body of man or other animals, nor can it be dependent upon being metabolized for the achievement of its primary intended purposes.

21 CFR 600.3(h) and (i) define a biological product as a virus, therapeutic serum, toxin, antitoxin, vaccine, blood, blood component or derivative, allergenic product, or analogous product, or arsphenamine or derivative of arsphenamine (or any other trivalent organic compound), applicable to the prevention, treatment, or cure of a disease or condition of human beings.

B. Which Centers review non-combination or “single-entity” products?

In general, single entity products that meet the definition of a drug are reviewed and regulated by the Center for Drug Evaluation and Research (CDER).

Similarly, in general, single entity products that meet the definition of a device are reviewed by the Center for Devices and Radiological Health (CDRH). Certain devices that are used in the manufacture or delivery of biological products may be reviewed and regulated under the device provisions of the Act by the Center for Biologics Evaluation and Research (CBER).

CBER is responsible for the review of blood, blood components, plasma derived products, cellular and gene therapy products, vaccines, allergenic extracts, antitoxins, antivenins and venoms. In June 2003, FDA transferred the review and regulation of some types of therapeutic biological products from CBER to CDER. Additional information about the current assignment of biological products between CBER and CDER is available at http://www.fda.gov/oc/combination/transfer.html .

OCP’s website has a variety of information on product jurisdiction to help sponsors understand what types of products are reviewed by CBER, CDER and CDRH.

C. What is a combination product?

A combination product is a product comprised of any combination of a drug and a device; a biological product and a device; a drug and a biological product; or a drug, device, and a biological product. Under 21 CFR 3.2 (e), a combination product is defined to include:

1. A product comprised of two or more regulated components (i.e., drug/device, biologic/device, drug/biologic, or drug/device/biologic) that are physically, chemically, or otherwise combined or mixed and produced as a single entity;

2. Two or more separate products packaged together in a single package or as a unit and comprised of drug and device products, device and biological products, or biological and drug products;

3. A drug, device, or biological product packaged separately that according to its investigational plan or proposed labeling is intended for use only with an approved individually specified drug, device, or biological product where both are required to achieve the intended use, indication, or effect and where, upon approval of the proposed product, the labeling of the approved product would need to be changed (e.g., to reflect a change in intended use, dosage form, strength, route of administration, or significant change in dose); or

4. Any investigational drug, device, or biological product packaged separately that according to its proposed labeling is for use only with another individually specified investigational drug, device, or biological product where both are required to achieve the intended use, indication, or effect.

D. What are some examples of combination products?

Examples of combination products where the components are physically, chemically or otherwise combined (21 CFR 3.2(e)(1)):

Examples of combination products where the components are packaged together (21 CFR 3.2(e)(2)):

Examples of combination products where the components are separately provided but labeled for use together (21 CFR 3.2(e)(3) or (e)(4)):

E. How are combination products assigned for review?

A combination product is assigned to an Agency center that will have primary jurisdiction for its premarket review and regulation. Under section 503(g)(1) of the Act, assignment to a “lead center” is based on a determination of the “primary mode of action” (PMOA) of the combination product. For example, if the PMOA of a combination product is that of a biological product, then the combination product would be assigned to the Agency component responsible for premarket review of that biological product.

A final rule defining the primary mode of action of a combination product (PMOA Final Rule) was published in the August 25, 2005, Federal Register, and is available at http://www.fda.gov/oc/combination/default.htm. The final rule, which is effective November 23, 2005, defines primary mode of action as “the single mode of action of a combination product that provides the most important therapeutic action of the combination product. The most important therapeutic action is the mode of action expected to make the greatest contribution to the overall intended therapeutic effects of the combination product.”

In some cases, neither FDA nor the sponsor can determine the most important therapeutic action of a combination product at the time a RFD is submitted. A combination product may also have two independent modes of action, neither of which is subordinate to the other. The final rule described an algorithm FDA will follow to determine the center assignment for these types of combination products. The algorithm first directs the assignment based on consistency with the assignment of other combination products raising similar questions of safety and effectiveness questions with respect to the combination product as a whole. When there are no such prior products (e.g., it is the first such combination product, or differences in its intended use, design, formulation, etc. present different safety and effectiveness questions), the algorithm directs the assignment to the agency component with the most expertise related to the most significant safety and effectiveness questions raised by the combination product.

F. How do I determine which Center will review my combination or non-combination/single-entity product?

The regulatory identity of a product as a drug, device, biological product, or combination product is often clear. Similarly, the primary mode of action of a combination product is often clear. On occasion, however, the regulatory identity of the product, or the Center with jurisdiction to review and regulate the product may be unclear, or may be the subject of a disagreement between the Agency and the sponsor. In these cases, sponsors may request a determination of the classification and/or assignment of a product.

Requests for classification (a determination of the regulatory identity of a product as a drug, device, biological product, or combination product) or assignment of a combination product to an Agency Center, may be handled formally or informally.

A formal request is made through the Request for Designation (RFD) process, which is described in this guidance in detail. However, when FDA has had enough experience with similar products, an informal determination may suffice. Rather than submitting an RFD, sponsors may request an informal determination of jurisdiction by telephone or by e-mail. Informal jurisdictional determinations are not binding on the agency.

Sponsors wishing to discuss jurisdictional issues informally may contact:

The Center jurisdictional officers of the Center you believe would review and regulate your product can also assist you in determining the appropriate Center:

G. What is a Request for Designation, and at what point in product development should I submit it?

A Request for Designation is an applicant’s written submission to the agency’s Product Jurisdiction Officer (the Office of Combination Products) seeking the designation of the agency component with primary jurisdiction for a product. An RFD is the mechanism by which sponsors can request a formal determination of either (1) the regulatory identity of a product as a drug, device, biological product, or combination product, or (2) which Center will have primary jurisdiction for premarket review and regulation of a combination product. FDA’s formal response to an RFD is a binding jurisdictional determination with respect to center assignment that may be changed only under conditions specified in 21 CFR 3.9 and Section 563 of the Act.

As explained in Section F above, it is not necessary to submit an RFD for every product. An RFD should be submitted when the jurisdiction of a combination or non-combination product is unclear or in dispute. Sponsors are encouraged to submit an RFD as soon as they have sufficient information for FDA to make a decision regarding assignment of a product. The RFD should be submitted before filing any investigational or marketing application for the product.

H. How do I submit a Request for Designation for a combination or non-combination/single-entity product?

The Request for Designation (RFD) process is outlined in 21 CFR Part 3. The regulation addresses (1) who should file; (2) when to file; (3) what to file; and (4) where to file an RFD. The specific information to be included in an RFD is described in 21 CFR 3.7, which can be accessed at http://www.fda.gov/oc/ombudsman/part3&5.htm#request. Part III of this document addresses the recommended format and content of an RFD in detail.

I. How promptly will FDA review my RFD?

Within 5 days of its receipt of an RFD, OCP will review the submission for administrative completeness and determine whether the RFD contains the information FDA needs to make its jurisdictional determination. OCP will then either send the sponsor an acknowledgement letter confirming the filing date of an RFD, or notify the sponsor that the RFD was not filed, and identify the information needed to make the RFD complete. For filed RFD’s, the acknowledgement letter will also identify the date by which FDA will respond to the RFD. If FDA does not issue a designation letter within 60 days of the filing of the RFD, as required by 21 CFR 3.8(b), the sponsor’s recommendation of the agency component with primary jurisdiction will become the designated agency component. Information regarding FDA’s timeliness in reviewing RFD’s is posted on our website at http://www.fda.gov/oc/combination. This information is updated periodically.

J. May I withdraw my RFD after submission?

Yes, you may withdraw your RFD by notifying OCP in writing any time after its submission and before FDA issues its jurisdictional determination. After FDA issues its determination, the assignment decision is binding, and you may not withdraw your RFD.

K. What if I disagree with OCP’s jurisdictional determination?

If you disagree with OCP’s jurisdictional determination, you may request that OCP reconsider its decision. According to 21 CFR 3.8(c), you may request reconsideration of a decision within 15 days of receipt of the designation letter. By regulation, a request for reconsideration cannot exceed five pages, and you may not include any new information in your request for reconsideration that was not contained in your original RFD. FDA will review and act in writing within 15 days of FDA’s receipt of the request for reconsideration. If you disagree with FDA’s response to your request for reconsideration, you may request further internal Agency review in accordance with 21 CFR 10.75. There is no time limit to submitting such an appeal.

L. How can I contact OCP?

You may e-mail OCP at combination@fda.gov , or call OCP at (301) 427-1934. Our mailing address is 15800 Crabbs Branch Way, Suite 200 (HFG-3), Rockville, MD 20855. Our fax number is (301) 427-1935.

III. WHAT INFORMATION MUST I INCLUDE IN AN RFD?

A. What information must I include in my RFD ?

According to 21 CFR § 3.7(c), you are required to include the following information in your RFD. Section III.E of this guidance further clarifies FDA’s recommendations for the information that should be provided for each of these sections.

  1. The identity of the sponsor, including company name and address, establishment registration number, company contact person and telephone number (3.7(c)(1)).
  2. A description of the product, including:
        1. Classification, name of the product and all component products, if applicable (3.7(c)(2)(i));
        2. Common, generic, or usual name of the product and all component products (3.7(c)(2)(ii));
        3. Proprietary name of the product (3.7(c)(2)(iii));
        4. Identification of any component of the product that already has received premarket approval, is marketed as not being subject to premarket approval, or has received an investigational exemption, the identity of the sponsors, and the status of any discussions or agreements between the sponsors regarding the use of this product as a component of a new combination product (3.7(c)(2)(iv));
        5. Chemical, physical, or biological composition (3.7(c)(2)(v));
        6. Status and brief reports of the results of developmental work, including animal testing (3.7(c)(2)(vi));
        7. Description of the manufacturing processes, including the sources of all components (3.7(c)(2)(vii));
        8. Proposed use or indications (3.7 (c)(2)(viii));
        9. Description of all known modes of action, the sponsor’s identification of the single mode of action that provides the most important therapeutic action of the product, and the basis for that determination (3.7(c)(2)(ix));
        10. Schedule and duration of use (3.7(c)(2)(x));
        11. Dose and route of administration of drug or biologic (3.7(c)(2)(xi));
        12. Description of related products, including the regulatory status of those related products (3.7(c)(2)(xii)); and
        13. Any other relevant information (3.7(c)(2)(xiii)).
  1. The sponsor’s recommendation as to which agency component should have primary jurisdiction.

B. What format should I follow for my RFD?

We recommend that you follow the format and organization described in 21 CFR § 3.7(c)(1)-(3). We recommend that you identify each required section of an RFD, in the order presented in the regulation, followed by your response. As explained in 21 CFR 3.7(c), RFD’s are limited in length to 15 pages, including attachments.

C. How should my RFD be addressed?

You should submit your original RFD to the Office of Combination Products, 15800 Crabbs Branch Way, Suite 200 (HFG-3), Rockville, MD 20855. We recommend that the envelope be marked as a “Request for Designation.”


D. Does FDA accept electronic submissions for RFD’s?

Yes. You may submit an RFD electronically to combination@fda.gov in a common electronic format, such as a word processing file or in Portable Document Format (PDF). You must concurrently submit your original RFD as described in Section C above.

E. What information does FDA recommend that sponsors provide in RFD submissions?

We recommend sponsors provide the following information to satisfy the requirements of 21 CFR 3.7 and to ensure sufficient information is available for FDA to determine the regulatory identity and most appropriate assignment of the product:

1. Contact Information . Section 3.7(c)(1)

You should include enough information for OCP to contact you, including your name and your company’s name, its street address, company establishment registration number (if applicable), telephone number, and alternate company contact person and contact information (if applicable). We also recommend you provide your fax number and email address.

2. Product Name. Sections 3.7(c)(2)(i), 3.7(c)(2)(ii), and 3.7(c)(2)(iii)

You should identify the classification, common, generic and/or usual names of your product and of all component products (if applicable). If you have chosen a proprietary name for your product, you should include that in your RFD.

3. Prior Approvals and Agreements. Section 3.7(c)(2)(iv)

This provision requires you to identify:

You should also include the status of any discussions or agreements that you have had regarding the use of the product as a component of a new combination product.

4. Chemical, Physical or Biological Composition. Section 3.7(c)(2)(v)

A fundamental part of your product’s description is its chemical, physical and/or biological composition. In other words, you should fully describe your product and its constituent parts. If OCP does not have enough information to understand the composition of your product, we will not be able to determine its regulatory identity or appropriate assignment.

5. Developmental Work and Testing. Section 3.7(c)(2)(vi)

This section requires that you include the status and brief reports of the results of developmental work, including animal testing. We recommend that you summarize any available preclinical and clinical studies. Since the focus of an RFD is to establish the mode(s) of action and (for a combination product) the PMOA of a product, information demonstrating whether a product or a component of a product works by chemical or metabolic action, and the PMOA of a combination product usually are very helpful.

6. Manufacturing Information. Section 3.7(c)(2)(vii)

We recommend that you include a description of the processes that will be used to manufacture your product, including the sources of all components. A brief description and/or flowchart will generally suffice.

7. Proposed Use or Indications. Section 3.7(c)(2)(viii)

Like the explanation of the composition of your product, the proposed use or indications section is a critical section of your RFD. You should state concisely and clearly the intended use and indications for use of your product. OCP considers both the intended use and indications for use of your product when making an assignment to an agency Center for premarket review and regulation.

8. Modes of Action. Section 3.7(c)(2)(ix)

This is the cornerstone of the RFD submission. A product’s modes of action are often critical to FDA’s determination of the regulatory identity of a single entity product, and a combination product’s primary mode of action determines its assignment. The regulation requires that you provide a description of all known modes of action, and, for combination products, identify the single mode of action that provides the most important therapeutic action of the product, and the basis for that determination. Additional information on modes of action and PMOA is provided below.

Modes of Action . The PMOA Final Rule defines “mode of action” as: the means by which a product achieves an intended therapeutic effect or action. For purposes of this definition, ‘therapeutic’ action or effect includes any effect or action of the product intended to diagnose, cure, mitigate, treat, or prevent disease, or affect the structure or any function of the body.

Products may have a drug, biological product, or device mode of action. Because combination products are comprised of more than one type of regulated article (biological product, device, or drug), and each constituent part contributes a biological product, device, or drug mode of action, combination products will typically have more than one mode of action. While the definitions below specifically apply to the constituent parts of a combination product, they may also be helpful in determining the modes of action of non-combination/single-entity products:

Primary Mode of Action. If your product is a combination product, the PMOA Final Rule requires that you identify the single mode of action that you believe provides the most important therapeutic action of the combination product. The PMOA Final Rule defines “primary mode of action” (PMOA) as “the single mode of action of a combination product that provides the most important therapeutic action of the combination product. The most important therapeutic action is the mode of action that is expected to make the greatest contribution to the overall intended therapeutic effects of the combination product.” As with “mode of action,” for purposes of PMOA, “therapeutic” effect or action includes any effect or action of the combination product intended to diagnose, cure, mitigate, treat, or prevent disease, or affect the structure or any function of the body.

When explaining the mode of action that you believe to be the single mode of action that is expected to make the greatest contribution to the overall intended therapeutic effects of the combination product, you should include the reasons why you think that action is the most important, and why the other mode(s) of action are secondary to it. You may also refer to any data you provided in your response to Section 3.7(c)(2)(vi). Literature references are often helpful.

Though not an exhaustive list (because each combination product presents different questions about its scientific characteristics and use), some questions that we consider when determining PMOA are provided below. We recommend that you consider and address these as appropriate when explaining the PMOA of your combination product:

Assignment Algorithm. For some products, it may not be possible for you or for us to determine, at the time your RFD is submitted, which one mode of action of a combination product provides the most important therapeutic action. Determining the PMOA of a combination product is also complicated for products where the product has two completely different modes of action, neither of which is subordinate to the other. The agency promulgated an assignment algorithm in the PMOA Final Rule (21 CFR 3.4(b)) to assign such products with as much consistency, predictability, and transparency as possible.

In those cases, the agency will assign the combination product to the agency component that regulates other combination products that present similar questions of safety and effectiveness with regard to the combination product as a whole. When there are no other combination products that present similar questions of safety and effectiveness with regard to the combination product as a whole (e.g., it is the first such combination product, or differences in its intended use, design, formulation, etc. present different safety and effectiveness questions), we would assign the combination product to the agency component with the most expertise related to the most significant safety and effectiveness questions presented by the combination product.

If you cannot determine the most important therapeutic action of your combination product, you should use the assignment algorithm. First, you should consider whether FDA regulates other combination products that present similar questions of safety and effectiveness with regard to the combination product as a whole. In other words, you should consider whether an FDA Center has direct experience with a product similar to yours. You should identify other combination products you wish FDA to consider during the assignment of your product.

If you do not believe that your product as a whole is similar to others that FDA has already reviewed or is currently reviewing, you should address the second criterion of the algorithm. Even if you believe your product is similar to another, we recommend that you explain how you think we should assign your product should we find it necessary to move to the second step in the algorithm. For this part of the algorithm, you should consider the most significant safety and effectiveness questions presented by your combination product, and which Center has the most expertise related to those questions.

The factors listed below are intended to further illustrate the kinds of issues we may consider, as appropriate, when determining the most significant safety and effectiveness questions presented by a product, or whether a new combination product presents similar safety and effectiveness issues as a previous product. We note that the list of factors below is not all-inclusive. FDA considers to be essential its ability to continue to assess the individual characteristics of particular products. This will allow the agency to respond to technological developments, scientific understanding, factual information concerning a specific product, or the composition, mechanism of action or intended use of a particular product. The questions are not listed in order of importance; indeed some factors may be weighted more than others depending on various issues presented by each individual combination product. If you believe FDA may need to consider the algorithm in the assignment of your product (i.e., if its most important therapeutic action cannot be determined with reasonable certainty), then we recommend you consider and address these and/or other safety and effectiveness issues, as appropriate, for your product:

9. Schedule and Duration of Use. Section 3.7(c)(2)(x)

You should briefly explain how often and for how long your product is intended to be used. For example, if your product is a single-entity device, it may be the type that would be implanted in the body during one surgical procedure with the expectation that, as long as the device functions, it will remain in the body indefinitely. In other cases, such as with a wound dressing, for instance, an RFD might explain that the dressing should be used over a four hour period, after which a change of dressing would occur if needed, with a maximum of six dressings to be used over a 24-hour time period. Yet another example would be if your product is a drug to be delivered by a device every twelve hours over a period of time not to exceed 10 days.

10. Dose and Route of Administration. Section 3.7(c)(2)(xi)

You should briefly explain the dose (amount) of the drug or biological product (or component) to be used, and how it will be used in or on the body. Using the examples mentioned above, you would explain that your product is implanted in the body during a single surgical procedure, and it is intended to remain in the body permanently. For a wound dressing containing both drug and device components, you would identify the specific amount of the drug contained in the device, and that it would be applied topically to the specific type of wound your product is intended to treat. Finally, if your product is an injectable drug, you would explain that the delivery device would be used to subcutaneously (intramuscularly, intravenously, etc.) inject a specific dose of the drug.

11. Related Products. Section 3.7(c)(2)(xii)

If you think there are other products like yours, or other products with related components, you should briefly explain what they are, how they are regulated, and their regulatory status (e.g., approved, investigational, etc.) so that we can consider them when making the assignment of your product. If you are not aware of other products like yours or other products with related components, you should state this in a sentence.

12. Other Relevant Information. Section 3.7(c)(2)(xiii)

If you think there is anything else we should consider when determining the appropriate classification and/or assignment of your product, you should explain that in this portion of your RFD. For example, literature references describing the product, its components, and its modes of action are often helpful.

13.Sponsor’s Recommendation. Section 3.7(c)(3)

The final section of an RFD provides you the opportunity to recommend the jurisdictional assignment of your product.

If your product is a single-entity (non-combination) product, you should explain why your product meets the statutory definition of a drug, device, or biological product. Based on this recommended classification, you should then state your recommendation whether CBER, CDER, or CDRH should regulate it. Your classification recommendation should be based on the composition, modes of action, and intended use of your product. OCP’s website has a variety of information on product jurisdiction to help sponsors understand what types of products are regulated by CBER, CDER and CDRH.

If your product is a combination product, you should explain which Center (CBER, CDER, or CDRH) should have the “lead” in the review of your product. This explanation should be based on the composition, intended use, modes of action, and the single mode of action that provides the most important therapeutic action of the product. If you do not believe that your combination product has a single mode of action that provides the most important therapeutic action of the product, then you should use the algorithm set forth in the PMOA Final Rule to make your recommendation of “lead” center (see Section 8 above).

F. How can I limit my submission to 15 pages including attachments as required by the regulation, and still provide all the information FDA needs to make its decision?

In FDA’s experience, a comprehensive RFD submission, addressing all the information required by the regulation and needed by FDA to make its jurisdictional determination, can be accomplished within the 15-page requirement. The key sections of an RFD are summarized in Section IV below.

IV. CONCLUSION

This guidance provides our recommendations for the format and content of an RFD submission. We recommend you pay particular attention to these sections of your RFD:

OCP is always available as a resource to you. We encourage you to contact OCP before submitting your RFD if you have any questions, or if you are uncertain about the type of information to include.

Appendix: RFD Screening Checklist

_____: Original RFD not exceeding 15 pages, including attachments (3.7(c))

_____: The identity of the sponsor, including company name and address, establishment registration number, company contact person, and telephone number (3.7(c)(1))

_____: Description of the product (3.7(c)(2))

_____: Classification, name of the product, and all component products, if applicable (3.7(c)(2)(i))

_____: Common, generic, or usual name of the product and all component products (3.7(c)(2)(ii))

_____: Proprietary name of the product (3.7(c)(2)(iii))

_____: Identification of any component of the product that already has received premarket approval, is marketed as not being subject to premarket approval, or has received an investigational exemption. The identity of the sponsors, and the status of any discussions or agreements between the sponsors regarding the use of this product as a component of a new combination product (3.7(c)(2)(iv))

_____: Chemical, physical, or biological composition (3.7(c)(2)(v))

_____: Status and brief reports of the results of developmental work, including animal testing (3.7(c)(2)(vi))

_____: Description of the manufacturing processes, including the sources of all components (3.7(c)(2)(vii))

_____: Proposed use or indications (3.7(c)(2)(viii))

_____: Description of all known modes of action, the sponsor’s identification of the single mode of action that provides the most important therapeutic action of the product, and the basis for that determination (3.7(c)(2)(ix))

_____: Schedule and duration of use (3.7(c)(2)(x))

_____: Dose and route of administration of drug or biologic (3.7(c)(2)(xi))

_____: Description of related products, including the regulatory status of those related products (3.7(c)(2)(xii))

_____: The sponsor’s recommendation as to which agency component should have primary jurisdiction based on the mode of action that provides the most important therapeutic action of the combination product. (3.7(c)(3))

_____: For combination products where the mode of action that provides the most important therapeutic action cannot be determined with reasonable certainty, the sponsor’s recommendation must be based on the assignment algorithm and an assessment of the assignment of other combination products the sponsor wishes FDA to consider during the assignment of its combination product. (3.7(c)(3))

_____: 1 st step of assignment algorithm: assignment of other combination products presenting similar safety and effectiveness questions

_____: 2 nd step of assignment algorithm: most expertise related to the most significant safety and effectiveness questions

Section 503(g) of the Act defines the term “agency center” as a center or alternative organizational component of the Food and Drug Administration.

Though a designation letter is binding as to assignment of a particular product, that assignment pertains only to the product described in the designation letter. If that product’s configuration, composition, modes of action, intended use, or other key aspect changes after the designation letter issues, it may be necessary to submit a new RFD to determine the new product’s appropriate assignment.

The checklist we currently use to screen RFD’s for filing is provided as an Appendix.

If your product is a non-combination or single-entity product, then you would not need to explain the product’s primary mode of action. We note that in some cases RFDs are submitted to determine whether a product is a single entity or a combination product. In those cases, we recommend that you address both possibilities. For instance, you should first explain why you believe your product meets the definition of a drug, a device, or a biological product, and is therefore a single-entity product. We also recommend that you consider the possibility that we may find that your product is a combination product. In so doing, you would explain what the modes of action of your product are, its PMOA, and which Center would be most appropriate to regulate the product based on its PMOA or the assignment algorithm.

horizontal rule