![](https://webarchive.library.unt.edu/eot2008/20090118101214im_/http://ntsb.gov/Graphics/Icon/sm_seal.gif)
Accident Investigation Animations
Collision Between an Amtrak Train and a Tractor-Trailer
Combination Vehicle
Grade Crossing Accident
Intercession City Florida
November 17, 2000
Highway Accident Report: [Abstract]
Videos are available in wmv
format and were presented at the Board meeting on 7/23/02 in Washington,
D.C.
Disclaimer: Visualizations
presented below used scene and vehicle surveys, witness statements, vehicle
operating characteristics, and pictures from the scene. The depictions
are not intended to represent actual lighting conditions at the time of
the accident
Vehicle Dynamics: A visualization of the truck's
path was rendered. The visualization and accident are described below.
- The video begins as the truck is making a left turn from Old Tampa Highway
onto KOA Power Road. According to witnesses, as the truck proceeded through
the turn the cargo bed of the trailer overlapped onto the grassy area on the
northwest corner of the intersection where a guide wire and stop sign were
located. In order to maneuver around the guide wire the driver had to stop,
back up, and move forward several times while the rear auxiliary driver
[1] steered
around the guide wire. The backing up and moving forward could have taken
several minutes and is not depicted in the video.
-
Once the truck was properly aligned the driver proceeded across the tracks
without stopping. When the truck entered the crossing, the crossing gates
were in the upright position and the signals were not flashing. At the
rear of the trailer you will see a rear or "pusher tractor". This is attached
to the rear of the trailer and was unoccupied at the time of the accident.
Just forward of the "pusher tractor" is the platform where the auxiliary
driver was located. As the truck proceeded across the tracks the signals
began to flash and the gates descended and struck the trailer. As
the "pusher tractor" approached the tracks the auxiliary driver got off
his platform and ran clear of the crossing, avoiding injury to himself.
His actions are not depicted in the video. As the unoccupied "pusher tractor"
was being pulled across the tracks it was struck on the right side by the
westbound train.
The simulations were produced on an HVT system using SIMON,
EDGENT and ReadDataFilT. All of the programs are trademarks of the
Engineering Dynamics Corporation and Collision Engineering Associate.
NTSB Home | Contact Us | Search | About the NTSB | Policies and Notices | Related Sites