Search Options | ||||
Index | Site Map | FAQ | Facility Info | Reading Rm | New | Help | Glossary | Contact Us |
Procedures and the Regulatory Flexibility ActThe Regulatory Flexibility Act (RFA) of 1980, as amended (5 U.S.C. 601 et seq.), requires Federal agencies to review their regulations to ensure that they do not unduly inhibit the ability of small entities to compete. The following information provides the NRC’s policy and procedures for complying with the RFA. On this page:
BackgroundThe RFA compels agencies to analyze the impact of their regulations on small entities and to communicate and explain their findings to the public. There are three specific RFA requirements applicable to NRC rulemaking:
Analysis of NRC Rulemakings -- Impact on Small EntitiesInitial DeterminationThe RFA applies to each rule subject to notice and comment rulemaking under the Administrative Procedure Act (APA) (5 U.S.C. 553 (b)). Therefore, the requirements of the RFA apply to each proposed rule developed by the NRC, but not to final rules for which a proposed rule was not issued. As part of the NRC rulemaking process, the agency has adopted procedures for constructing a rulemaking plan. The NRC’s Management Directive “The Rulemaking Process” (MD 6.3) section 4(c) states that the NRC technical staff is to consider whether a rulemaking will be cost-effective and whether it will be a major rule. A "major rule" under the Small Business Regulatory Enforcement Fairness Act is one that is likely to result in an annual effect on the economy of $100 million or more. In conjunction with this analysis, the staff makes a preliminary determination whether the rulemaking is likely to affect licensees qualifying as small entities. In accordance with Small Business Administration’s (SBA) regulation 13 CFR 121.902 (b)(4), the NRC has developed its own size standards for performing a Regulatory Flexibility Analysis pursuant to the RFA, and has verified with the SBA Office of Advocacy that its size standards are appropriate for NRC analyses. The NRC size standards at 10 CFR 2.810 define the following types of small entities:
Apart from these size standards, the NRC closely follows other SBA provisions. In particular, the NRC defines annual receipts in accordance with the SBA regulations at 13 CFR 121.104. In addition, the NRC has applied SBA regulations regarding affiliation at 13 CFR 121.103 and has determined that an NRC licensee who is a subsidiary of a large entity does not qualify as a small entity for purposes of this determination. Draft Regulatory AnalysisBecause the NRC is committed to regulating in a cost-effective manner, it is the agency’s policy to prepare for each rulemaking, and to make publicly available, a regulatory analysis calculating the costs and benefits, including alternative regulatory approaches. The NRC’s Regulatory Analysis Guidelines require that the factors necessary to evaluate the economic impact of the regulatory action under consideration on small entities be addressed in the Regulatory Analysis. Impact on Small Entities: Initial Regulatory Flexibility AnalysisIf the NRC believes that a proposed rule will have a significant economic impact on a substantial number of small entities, the staff prepares an initial regulatory flexibility analysis. Procedurally, since the factors necessary to evaluate the economic impact of the proposed rule on small entities are addressed in the regulatory analysis that considers the costs and benefits of the proposed rule, the regulatory flexibility analysis is normally included as an appendix to the regulatory analysis. The draft regulatory flexibility analysis, or a summary of the analysis, is published in the Federal Register for public comment as an appendix to the proposed rule. In brief, such analysis provides
When the final rule is published in the Federal Register, it contains a final flexibility analysis. This includes a summary of the issues raised by public comments in response to the initial regulatory flexibility analysis, the NRC’s assessment of these issues, and any changes made in the proposed rule as a result of the comments. No Impact on Small Entities: CertificationIf the NRC determines that a proposed rule is not likely to have significant economic impact on a substantial number of small entities, the Commission provides certification to this effect in accordance with section 605(b) of the RFA. In these circumstances, the NRC does not prepare an initial regulatory flexibility analysis. The draft regulatory analysis which contains sufficient information to support the certification is made an enclosure to the Commission paper or the memorandum requesting issuance by the Executive Director for Operations (EDO). The Commission’s certification statement contains sufficient information to support the conclusion of no significant impact, and provides information on the number and type of small entities involved and the potential effect the rule will have upon them. The Commission’s certification and accompanying rationale is published in the Federal Register in the preamble for the proposed rule along with a request for public comment on the Commission’s decision to dispense with a regulatory flexibility analysis. This certification statement is repeated in final rules unless, based on comments received or other information, there is a reason to change this conclusion, in which case a final regulatory flexibility analysis is prepared. The NRC staff reviews and addresses all public comment regarding the Commission’s certification in the statement of considerations for the final rule. In the event of adverse comments, the statement of considerations will contain clear justification for the Commission’s decision to reaffirm its initial certification; alternatively, the Commission directs the staff to conduct a regulatory flexibility analysis, which is published along with the final rule. Need for More InformationIn some instances, the NRC staff may find, after preparing an initial regulatory flexibility analysis or conducting a preliminary examination of the anticipated impacts of the proposed rule on small entities, that the NRC needs more information on how or whether the proposed rule will actually affect small entities or on how a rule may be modified to alleviate significant economic impact upon them. In such cases, the NRC may include in the preamble of the proposed rule a request for public comment on the potential impact of the proposed rule on small entities. Typically, small entities are invited to discuss
Comments received on regulatory flexibility issues are addressed in the statement of considerations for the final rule. Emergency SituationsThe RFA permits the NRC to delay the completion of a regulatory flexibility analysis for a rule issued in response to an emergency, when compliance with the RFA would obviously be impractical. The NRC publishes in the Federal Register, concurrent with the final rule, a written finding detailing need for and cause of the delay of the analysis. The NRC then shall prepare its flexibility analysis within 180 days of completion of the final rule or the rule will lapse and have no effect. The NRC’s policy is to limit its interpretation of “emergency situations” as to those that could have an immediate and significant impact on public health and safety. Routine Notification to SBAIn addition to requesting public comment for proposed rules and their accompanying draft regulatory flexibility analyses, the NRC routinely informs the Small Business Administration (SBA) of each proposed and final rule that includes a regulatory flexibility certification statement or for which a regulatory flexibility analysis has been performed. This notification occurs at the time the NRC transmits the rulemaking for publication in the Federal Register. Any SBA comments on a draft rule that may have a significant economic impact on a substantial number of small entities are addressed in the statements of consideration when the NRC publishes its final rule in the Federal Register, unless the Commission certifies that doing so does not serve the public interest. Periodic Review of Existing RulesSection 610 of the RFA requires the NRC to review all regulations that have a significant economic impact on a substantial number of small entities within 10 years of their adoption as final rules. Much of the NRC’s regulatory effort is directed to licensees who are not small entities; consequently, a significant number of the agency’s regulations do not require Section 610 review. The few NRC regulations which have been found to have a significant impact on a substantial number of small entities concern byproduct, source, and special nuclear material licensees. The specific regulations that have been determined to have a significant economic impact on small entities have been revised recently; they are:
Because these regulations have been amended within the 10-year window, it has not been necessary for the NRC to develop a schedule for Section 610 review of its standing rules. Semiannual Regulatory AgendaThe RFA requires the NRC to publish a regulatory agenda twice a year in the Federal Register listing all rules under development that are expected to have a significant economic impact on a substantial number of small entities. The agenda is required to state the objectives and legal basis of each such rule, discuss its expected impact on small entities, and provide a schedule for completion of each action. The NRC complies with this regulatory flexibility agenda requirement by submitting data for inclusion in the Unified Agenda of Federal Regulatory and Deregulatory Actions (Unified Agenda), published in the spring and fall of each year by the Office of Management and Budget (OMB). Since all NRC rulemakings approved for development by the Commission, the EDO, or the Chief Financial Officer are assigned a Regulation Identifier Number (RIN), readers can easily cross-reference Unified Agenda entries to Federal Register notices and track a rulemaking from its planning to promulgation. Resources
|
Privacy Policy |
Site Disclaimer |