				Search Options
Index \| Site Map \| FAQ \| Facility Info \| Reading Rm \| New \| Help \| Glossary \| Contact Us

The Programmable Logic Controller and Its Application in Nuclear Reactor Systems (NUREG/CR-6090)

On this page:

Publication Information
Abstract

Download complete document

The following links on this page are to documents in Adobe Portable Document Format (PDF). See our Plugins, Viewers, and Other Tools page for more information. For successful viewing of PDF documents on our site please be sure to use the latest version of Adobe.

NUREG/CR-6090 (PDF - 5.6 MB)

Publication Information

Manuscript Completed: August 1993
Date Published: September 1993

Prepared by
J. Palomar, R. Wyman

Lawrence Livermore National Laboratory
P.O. Box 808
Livermore, CA 94550

Prepared for
Division of Reactor Controls and Human Factors
Office of Nuclear Reactor Regulation
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001
NRC FIN L1867

Availability Notice

Abstract

This document provides recommendations to guide reviewers in the application of Programmable Logic Controllers (PLCs) to the control, monitoring and protection of nuclear reactors. The first topics addressed are system-level design issues, specifically including safety. The document then discusses concerns about the PLC manufacturing organization and the protection system engineering organization. Supplementing this document are two appendices. Appendix A summarizes PLC characteristics. Specifically addressed are those characteristics that make the PLC more suitable for emergency shutdown systems than other electrical/electronic-based systems, as well as characteristics that improve reliability of a system. Also covered are PLC characteristics that may create an unsafe operating environment. Appendix B provides an overview of the use of programmable logic controllers in emergency shutdown systems. The intent is to familiarize the reader with the design, development, test, and maintenance phases of applying a PLC to an ESD system. Each phase is described in detail and information pertinent to the application of a PLC is pointed out.