Floor Coatings
(Taken from Construction Safety magazine, Vol. 11, No.
3, Autumn 2000) ![PDF Version](https://webarchive.library.unt.edu/eot2008/20090117221953im_/http://www.cdc.gov/elcosh/images/pdf.gif) |
|
![Versión en español](https://webarchive.library.unt.edu/eot2008/20090117221953im_/http://www.cdc.gov/elcosh/images/iconinnerspanish.gif)
Construction
Safety Association of Ontario
The rules described here apply in Canada. For U.S. regulations on confined spaces, material safety data sheets (MSDSs), flammable coatings, and slip resistance, search the construction regulations at www.osha.gov |
A floor-finisher died when an explosion ripped through an Etobicoke house last night. The victim was one of two men working in the basement. He was applying a coat of sealant to the floor when the blast occurred. His co-worker was upstairs talking to the homeowner at the time. Police say a pilot light from a water heater may have triggered the explosion. (12 July 2000)
Over
the last five years, several workers have died and many have been critically
injured while applying coatings to floors in basements.
Most coatings contain petroleum products and are extremely flammable.
When rolled or sprayed on, the coatings can create an atmosphere that
poses the risk of flash fire or explosion if ignition sources are present.
Many coatings are also toxic and may cause respiratory problems if inhaled.
Controls are necessary to prevent and protect against hazardous levels
of contaminants building up when adhesives, sealants, and other floor
laying and finishing products are applied in residential basements.
Substitution
One approach involves substitution. For example, exchange a flammable
product for a less flammable oneor eliminate flammable products
from the process altogether.
WHMIS
The Workplace Hazardous Materials Information System (WHMIS) legislates
safeguards. Employers are required by law to ensure that manufacturers
labels and material safety data sheets (MSDSs) are available for controlled
products such as adhesives and coatings and that workers are instructed
in their use.
Workers must be trained to read labels, follow MSDS instructions, and
work safely with floor laying and finishing products. The MSDS will specify
protective equipment such as gloves or respirators that must be worn when
using the product.
Ignition
Sources
When working with flammable products, ensure that all ignition sources
have been eliminated or locked out in the work area. Ignition sources
can range from sparks and hot surfaces to pilot lights and smoking materials.
Confined
Spaces
Other controls are based on regulated procedures for entering and working
in confined spaces.
An unventilated residential basement where a flammable sealant is being
applied qualifies under the law as a confined space. A space is confined
when entry or exit is restricted and the atmosphere is hazardous.
Entry and work in confined spaces requires special precautions. For instance,
before applying a floor sealant in a basement, determine whether any hazardous
conditions are present:
- lack of air movement
- unventilated
space
- sealant vapours
heavier than air.
For floor laying
and finishing in residential basements, the most effective controls are
testing, ventilation, and monitoring.
- A competent worker
must test the basement atmosphere to determine that its not toxic,
oxygen-deficient, oxygen-enriched, or flammable.
- If the atmosphere
is hazardous, open doors and windows and, if necessary, use exhaust
ventilation to clear the air.
- The atmosphere
must be continuously monitored as long as people are working there.
If the atmosphere
cannot be adequately ventilated, then other, more stringent measures must
be applied. These are spelled out in the construction regulation (O. Reg.
213/91), Sections 60-63.
This
document appears in the eLCOSH website with the permission of the author
and/or copyright holder and may not be reproduced without their consent.
eLCOSH is an information clearinghouse. eLCOSH and its sponsors are not
responsible for the accuracy of information provided on this web site,
nor for its use or misuse.
eLCOSH
| CDC | NIOSH
| Site Map | Search
| Links | Help
| Contact Us | Privacy Policy
|