Protecting People and the EnvironmentUNITED STATES NUCLEAR REGULATORY COMMISSION
ACCESSION #: 9606140133
Information & Support Services
P.O. Box 3707
Seattle WA 98124-2207
June 5, 1996
G-1151-SJA-96-321
Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555
BOEING
Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31, 1992;
R. S. Orr to the NRC Operations Center
b) NRC Letter Docket No. 99901227 dated August 12, 1992; L.
J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21
Inquiry
Dear Sir or Madam:
In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers. Because of unknown current addresses, the following
former customers were not notified:
Reactor Controls, Inc.
Echo Energy Consultants, Inc.
Nuclear Applications and Systems Analysis Company (Japan)
Nuclear Power Services
Tenera Engineering Services
Gibbs & Hill, Inc.
Error notices have been sent to our other former customers.
Very truly yours,
Sandra J. Andrews
Nuclear Administrator
G-1151 M/S 7A-33
(206) 865-6248
Attachment(s): GTSTRUDL Program Report Form No. 96.17
Georgia Tech Computer Aided Structural Engineering Center
Georgia Institute of Technology
School of Civil & Environmental Engineering
Atlanta, Georgia 30332-0355
USA
404-894-2260
404-894-8014 FAX
May 30, 1996
Attention: Nuclear Administrator
Boeing Information & Support Services
P. O. Box 24346, M/S 7A-33
Seattle. Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No. 96.17 and
a VENDOR ACKNOWLEDGEMENT FORM. Please sign and return the VENDOR
ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTSTRUDL Program
Report.
Thank you for reviewing the Program Report and for returning the
Acknowledgement Form.
Best regards.
CASE Center
Catherine Lee
Configuration Control Manager
CL/tlk
Enclosures
An Equal Foundation and Employment A Unit of the University
Opportunity Institution System of Georgia
GTSTRUDL Program Report Form
GPRF No.: 96.17
DATE: May 29, 1996
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
X URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within the
session or job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high
frustration factor.
_ INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed May 29, 1996
Date Notification Sent May 31 1996
Computers All
Operating System All
Version All versions prior and including to 9601
Target Release for Correction 96.02
Senior Software Developer
Signature Title
R & D Division
Hamid Zand
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature
Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.: 96.17
DATE: May 29,1996
DESCRIPTION:
STEEL DESIGN (Offshore Design Only, API codes)
Offshore design codes, APIWSD20 and APIOCT84, will not check the
bending stress provisions of a member when the internal axial force is
less than 2.224 Newton (0.5 Pound). When the axial force is less than
2.224 Newton (0.5 Pound) and bending moment exists, only the shear stress
is checked.
Workaround:
Apply an axial load which create an internal axial force greater
that 2.224 Newton (0.5 Pound).
Applicable GTSTRUDL User's Manual:
For APIOCT84 code.
Volume 8 Section 3.3. Table 3.3-2
Section 3.4
Prior to and including Revision N
Prior to and including version 9601
For APIWSD20 code.
Volume 8 Section 3.3, Table APIWSD20
Section 3.4
Revision P
Version 9601
Rev 2.2
*** END OF DOCUMENT ***
