FDA > CDRH >
Public Health Notifications > FDA Public Health Notification: Safety Tips for Preventing Hospital Bed Fires
FDA Public Health Notification: Safety Tips for Preventing Hospital Bed Fires
(You are encouraged to copy and distribute this information)
Updated: March 30, 2004
Originally Posted: December 18, 2003
Dear Colleague:
The Food and Drug Administration has received 95 reports of fires involving
electrically powered hospital beds since 1993. To help prevent incidents of
this kind, we have developed the enclosed lists of safety tips. They apply to
all electrically powered healthcare beds. They may be particularly useful for
older model beds. One list is intended for the clinical staff and the other
for staff responsible for bed maintenance. Please feel free to detach the lists
and reproduce them in your institution.
Reporting Bed Fires to FDA
The Safe Medical Devices Act of 1990 (SMDA) requires hospitals and other user
facilities to report deaths and serious injuries associated with the use of
medical devices. FDA is interested in additional data on adverse events of fires
involving hospital beds. Healthcare providers employed by facilities that are
subject to FDA’s user facility reporting requirements should follow the
reporting procedures established by their facilities. All other providers may
submit their reports to MedWatch, FDA’s voluntary reporting program. The
reports can be submitted by phone at 1-800-FDA-1088; by fax at 1-800-FDA-0178;
by mail to MedWatch, Food and Drug Administration, HF-2, 5600 Fishers Lane,
Rockville, Maryland 20857, or online at http://www.accessdata.fda.gov/scripts/medwatch/.
Getting More Information
If you have questions regarding this notification, please contact Lily Ng,
Office of Surveillance and Biometrics (HFZ-510), 1350 Piccard Drive, Rockville,
Maryland 20850, by fax at 240-276-3356, or by email at phann@cdrh.fda.gov.
Additionally, a voice mail message may be left at 240-276-3357, and your call
will be returned as soon as possible.
All of the FDA medical device postmarket safety notifications can be found
on the World Wide Web at http://www.fda.gov/cdrh/safety.html.
Postmarket safety notifications also can be obtained through e-mail on the day
they are released by subscribing to our list server. You may subscribe at http://service.govdelivery.com/service/subscribe.html?code=USFDACDRH_10.
|
Sincerely yours,
David W. Feigal, Jr., MD, MPH
Director
Center for Devices and Radiological Health
Food and Drug Administration |
Enclosure
FDA Safety Tips to Prevent Fires Caused by Hospital Beds:
Clinical Staff
The following safety tips should be routinely used by the clinical staff to
reduce the risk of fires caused by hospital beds.
It is assumed that normal behavioral policies such as prohibitions against
smoking, lighting candles, etc., are already in place. The fire risks posed
by oxygen administration to a patient in bed are not addressed in this list
of safety tips.
- Connect the bed’s power cord directly into a wall-mounted outlet.
Use only a power cord meeting the bed manufacturer’s requirements. Make
sure that the wall-mounted outlet will accommodate a heavy duty or hospital-grade
plug and that the outlet is in good working order. The plug of the power cord
should fit tightly into the wall outlet. The plug body, the wall outlet, and
the wallplate should not be cracked or chipped. The plug blades should be
securely retained in the plug body. When the bed has a power cord with a three-prong
plug, the ground pin of the plug should be intact and secure. When in doubt
about any of these concerns, check with your facility maintenance staff or
biomedical engineering department.
- Do not connect the bed’s power cord to an extension cord or to
a multiple outlet strip. Whenever possible, avoid the use of extension
cords or multiple outlet strips in patient rooms for any medical electrical
equipment since they are highly vulnerable to physical damage that can cause
fires. If the use of extension cords or multiple outlet strips cannot be avoided,
use only heavy duty or hospital-grade connectors that are approved by the
facility’s engineering department. Extension cords and multiple outlet
strips should only be installed by properly-trained electrical maintenance
personnel. Multiple outlet strips should be mounted on a fixed object (e.g.,
equipment cart or night stand) to reduce the risk of liquid spills and physical
damage. In addition, if multiple-receptacle outlet boxes are used, they also
should be protected from the risk of liquids spills and physical damage. All
extension cords and multiple outlet strips should be tagged and inspected
routinely.
- Visually inspect the bed’s power cord for damage. The bed’s
power cord, as well as power cords from other medical electrical equipment,
can sustain damage from crushing, pinching, shearing, cutting, or from being
worn through from cleaning solutions. They also can be damaged by bed movement,
deterioration from use or aging, or human or equipment traffic. Furniture
placement (e.g., a rocking chair positioned too close to a power cord) also
can be hazardous. The cord’s insulation should be intact and there should
be no evidence of bulging, stretching, crimping, cracking, or discoloration,
especially at the ends, where the cord is attached to the plug body and to
the bed itself.
- Do not cover the bed’s power cord or any power cord with a rug
or carpet. Rugs or carpets can prevent normal air flow, which can lead
to greater heat build-up. Covered power cords also are more prone to being
walked on or having furniture placed directly on them. The bed maintenance
staff should place the cord in a low or no traffic area.
- Ensure that appropriate staffs inspect all parts of the bed frame, motor
and hardware, mattress, and the floor beneath and near the bed for build-up
of dust and lint.
- Test the bed to assure that it moves freely to its full limit in both
directions. In many facilities, wall mounted outlets are located directly
behind the hospital bed. Check to be sure that the vertical motion of the
bed does not interfere with the bed’s power cord or plug. In addition,
the bed’s hand control cable and all other power cords should not be
threaded through mechanical parts of the bed or bed rails where normal bed
movement may damage or cut the cable.
- Test the bed’s hand and panel control, including the patient lockout
features, to assure that the bed is working properly.
- Inspect the covering of the bed’s control panel and the patient
control panel to assure that the covering is not cracked or damaged. Cracked
or damaged covers can allow liquids or other conductive material to penetrate
to the switches.
- Check patient bed occupancy monitors and all other equipment in the patient’s
room with plug-in power supplies for indications of overheating or physical
damage. Make sure that the power supplies are plugged into a wall socket
where they cannot be contacted by bed clothes, bedding, etc.
- Report to the bed maintenance personnel, any unusual sounds, burning
odors, or movement deviations observed in the controls, motors, or the limits
switch functions.
- Assure that all manufacturers’ recalls, urgent safety notices,
etc., have been followed.
FDA Safety Tips to Prevent Fires Caused by Hospital Beds:
Staff Responsible for Bed Maintenance
The following safety tips should be routinely used by the staff responsible
for bed maintenance to reduce the risk of fires caused by hospital beds.
It is assumed that normal behavioral policies such as prohibitions against
smoking, lighting candles, etc., are already in place. The fire risks posed
by oxygen administration to a patient in bed are not addressed in this list
of safety tips.
In addition to the safety tips listed for clinical staff, bed maintenance personnel
should regularly:
- Perform routine electrical safety testing per the manufacturer’s
recommendation or based on your facility’s established protocols.
When the bed has a power cord with a three-prong plug, assure that the electrical
resistance of the safety ground conductor and the level of leakage current
(line conductor-to-safety ground and neutral conductor-to-safety ground) meet
applicable standards. One such standard, IEC 60601-1, specifies 0.2 ohms and
500 µA leakage current for these two values. IEC 60601-1 is formally
recognized by the Food and Drug Administration. UL 2601-1 is a widely used
American version of IEC 60601-1. Your facility may use other comparable standards.
Note 1: FDA is concerned with the safety of medical devices but electrical
wiring of buildings is not within the Agency’s scope of responsibility.
However, we wish to emphasize that any protection afforded by the bed’s
ground pin is negated if the receptacle is not properly grounded. If you
have questions about the adequacy of your facility’s building wiring,
we recommend that you contact a qualified electrician or consult the code
authority in your jurisdiction.
Note 2: Beds with two-prong power cord plugs are considered safe if they
are approved as a Class II (double-insulated) device by a nationally recognized
testing laboratory such as UL. Major medical device standards (IEC 60601-1,
UL 544/UL1097, and UL 2601-1 and the healthcare facilities standard NFPA-99)
require that devices with double-insulated construction are to be marked
with either “Double-Insulated,” “Double Insulation,”
or the international symbol for such. These markings are to appear on the
body (frame or controls enclosure) of the device.
- Check all electrical outlets, including accessory outlets that may be
mounted on patient beds, for cleanliness, physical integrity, and functionality.
The IEEE standard 602-1996, section 4.2.2 advises that hospital-grade outlets
be used and that they should be mounted with the ground pin or neutral blade
up to assure that any metal that may drop between the plug and the wall will
most likely contact an unenergized blade. (Specifications for “hospital-grade”
connectors appear in UL498-2001, Supplement SD.)
- Check the bed’s power cord and other power cords connected to medical
electrical equipment in the patient’s room to assure that heavy duty
or hospital-grade plugs are used, contact pins are straight and secure, and
that strain reliefs are adequate.
- Check battery-powered beds for hot spots in their power cords, batteries,
voltage inverters, and battery chargers.
- Check, maintain and service the bed’s motors and mechanism in accordance
with the manufacturer’s recommended service plan to assure that the
motors are not stalling and overheating.
- Check that all gas and liquid fittings (such as on specialty care beds)
are in good condition, without leaks or other signs of visible damage.
- Check that all switch-type circuit breakers move freely.
- Check that the ratings of external fuses match the requirements of the
device and that the appropriate spare fuses are present. Fuses have a
number of critical ratings in addition to their current rating. Be very careful
when making substitutions. Using the incorrect fuse can negate its protective
function, leading to equipment damage and/or fire.
- Check the bed’s and all other electrical power cable connectors
in the patient’s room to assure that they are in good condition.
Keep all power cords free of moving bed parts. Keep power cords off the floor
if possible. If running power cords on the floor cannot be avoided, they should
be located in low or no traffic areas and then taped down only as minimally
necessary to avoid a tripping hazard.
- Check your equipment inventory for beds that have 120volt AC powered
patient and clinician controls. These controls are vulnerable to liquid
spills that have led to bed fires. Contact the bed manufacturer regarding
options to convert the patient control to a low voltage AC powered control.
When replacement or conversion of such beds is not a reasonable option, regularly
perform maintenance to prevent possible electrical arcing or overheating.
- Assure that all manufacturers’ recalls, urgent safety notices,
etc., have been followed.
Back to Safety Alert Page
Updated March 31, 2003
![horizonal rule](https://webarchive.library.unt.edu/eot2008/20090117033119im_/http://www.fda.gov/graphics/blkpixel.gif)
CDRH Home Page | CDRH A-Z Index | Contact CDRH | Accessibility | Disclaimer
FDA Home Page | Search FDA Site | FDA A-Z Index | Contact FDA | HHS Home Page
Center for Devices and Radiological Health / CDRH