![]() |
||
![]() |
![]()
|
National ITS Architectureby S. Lawrence PaulsonState and local transportation planners who want to make full use of the exciting potential of intelligent transportation systems (ITS) are learning that they don't have to go it alone. The U.S. Department of Transportation (DOT) has launched a major effort to inform the transportation community about the National ITS Architecture, a framework designed to help ensure that ITS systems operate as efficiently as possible through integration and interconnection. The goal is to encourage the development of solutions that are good investments now and that will continue to pay dividends well into the future. The National ITS Architecture was developed for DOT by a combined Lockheed Martin and Rockwell International team that used resources from the public and private sectors and from academia. It was completed in June 1996 after nearly three years of effort. Simply described, the architecture is a master blueprint for the development of an integrated, multimodal intelligent transportation system. But unlike a blueprint for a home or factory, intended for use by a single set of builders, the National ITS Architecture is designed to be used by all transportation agencies that develop and operate federally funded ITS projects. The Transportation Equity Act for the 21st Century (TEA-21) requires such projects to be consistent with the architecture. (See TEA-21 article on page xx.) Providing Coordination When ITS systems can be designed to communicate and share information with other systems, everyone benefits. Such coordination increases efficiency, eliminates duplication, and saves time and money. It can also save lives and help the environment; studies have indicated that the benefits produced by an integrated transportation system include increased safety, decreased travel time, fewer delays, decreased fuel consumption, and reduced emissions. Although the list is certain to get longer as new technologies are developed, DOT has identified nine ITS infrastructure components that can currently be integrated to become a platform for managing travel in metropolitan areas:
If those individual systems are pieces of a jigsaw puzzle, National ITS Architecture helps state and local transportation planners put the puzzle together in a way that begins to create real synergy. The resulting system goes far beyond being just the sum of its parts. If the designer of a system at the traffic management center wants to send data to the transit management system, the architecture is a repository of the kinds of data that the designer might want to send, explains Mac Lister, travel management program coordinator for the ITS Joint Program Office at DOT. It can save a significant amount of design work and time. The architecture contains detailed specifications that can help the designer pick and choose what makes sense for any system design. Lister points out that his office is already receiving testimonials about the benefits of the National ITS Architecture. The Colorado Department of Transportation, which is trying to integrate its infrastructure systems, developed a system specification in 60 days with three engineers using the architecture, saving an estimated six months of effort. The Southern California corridor network says the National ITS Architecture reduced by 50 percent the time it needed to define requirements for its new corridor system. But the National ITS Architecture is not a design document. It does not tell transportation planners what technology to select - only what functions to consider in making their own design decisions. It thus preserves planners' flexibility to respond to local needs and circumstances - for example, to choose fiber-optic over twisted-pair technology for wireline communications. The architecture is a starting point for making decisions about how to meet specific local and regional needs through the implementation and coordination of ITS. Creating a Common Vocabulary Lister explains the distinction between the architecture and the standards in this way: The architecture talks about the kinds of data that might flow between a transit management center and a traffic management center, whereas the standards are actually detailed hardware or software interfaces. The architecture is a much higher level representation of the information, while the standards tell which wires must connect to which other wires and the specific message set that occurs between various pieces of the infrastructure. With an architecture and no standards, systems could have similar designs and function in similar ways but might be incapable of exchanging information seamlessly. Transportation planners might be forced to choose either off-the-shelf traffic control software that cannot be easily upgraded and might not fully meet the system's needs or expensive custom-designed programs that work only with a particular combination of equipment. The ITS standards development process calls for the use of open, nonproprietary standards that will encourage multiple vendors to enter the market, giving transportation agencies a choice of suppliers for equipment, support, and upgrades. Competition will hold down prices and encourage innovation. The ITS standards are being developed cooperatively by public and private sector experts working through existing standards-developing organizations (SDOs). The following SDOs are currently involved in this effort: the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), the American Society for Testing and Materials (ASTM), the National Electrical Manufacturers Association (NEMA), the American National Standards Institute (ANSI), the Society of Automotive Engineers (SAE), and the Institute of Electrical and Electronics Engineers (IEEE). Standards development is designed to be an extremely democratic process, open to any interested party. Proposed standards will be available for public comment, and balloting procedures are aimed at ensuring that final versions of standards have widespread support before they are adopted. A testing period will follow the adoption of a standard, giving further assurance that the resulting technology will meet the goals of the National ITS Architecture. It is expected that more than 20 ITS standards will be adopted by the end of this year. Reaching Out to the Regions The meetings also give DOT facilitators an opportunity to impart several key messages about the effort to ensure consistency with the National ITS Architecture. One message is that the policy regarding consistency is still under development and is subject to modification as a result of discussions with DOT's state and local transportation partners. In addition, the requirements will be phased-in over time. DOT expects that it will be several years before the full policy goes into effect. Another key message is that DOT won't require the replacement of existing ITS systems or equipment that have proprietary interfaces. Instead, DOT will encourage transportation partners to make future investments with the objectives of the national architecture in mind to facilitate the electronic sharing of data. As DOT facilitators lead participants in the outreach sessions through an outline of the National ITS Architecture planning process as it is currently envisioned, they stress that it will be a purely local decision to determine which agency will take the lead in developing a regional ITS architecture. "What we're saying is that whoever in the area wants to push the technology, the development of the ITS infrastructure - it could be the state department of transportation; it could be the local transit agency - that entity would be the champion of developing this regional architecture. Ultimately, it needs to get incorporated into the transportation plan that the metropolitan planning organization [MPO] adopts. But that doesn't mean the MPO has to develop it," Lister explained. Regardless of who takes the lead, DOT facilitators have been telling participants in regional outreach sessions that it's important to involve as many transportation agencies and organizations as possible in the process of developing a regional ITS architecture. This may include groups not traditionally involved in the planning process, such as emergency services, bureaus of travel and tourism, incident management, and information service providers. After the group is formed, the next steps are to identify how local and regional needs can be met by ITS, what ITS components are currently in place, and what components need to be acquired in the future. The final step is to define a regional architecture. This is basically a high-level design for regional ITS that relates the ITS components that a region already has and the components it wants to have to the National ITS Architecture. Once these steps have been completed, DOT's implementation plan envisions that regions will take these follow-up steps:
Clarifying the Federal Role At the project level, FHWA's roll depends on the system designation and agreements with the contracting agency. For projects not requiring federal oversight, the contracting agency is responsible for ensuring consistency with the National ITS Architecture much in the same way that they ensure compliance with other federal requirements. For projects with federal oversight, FHWA will work with the contracting agency to ensure consistency. ITS experts at DOT emphasize that being consistent with the National ITS Architecture is not a regulatory program but an effort to encourage the adoption of planning practices that will take full advantage of available technology and promote the seamless exchange of information. As emphasized in a brochure for senior transportation managers, the architecture does not dictate the design of your system, but rather it helps to align the requirements for the deployment envisioned. Lister promises that DOT will try to keep documentation requirements to a minimum. As Lee Simmons wrote in a previous article for Public Roads, "The architecture is the framework that makes possible a national infrastructure of integrated, intermodal, and interoperable ITS. As such, its development is the cornerstone achievement of the national ITS program."
Articles & Departments Building a Bridge to the Public: The Alaska Experience Bridging the Centuries: Moving Virginia's Bridge
Program Into the 21st Century TEA-21: "A Historic Piece of Legislation
|
![]() |
TFHRC Home | FHWA
Home | Feedback
United States Department of Transportation - Federal Highway Administration |