Cardy NO3- Tester (Nitrate Ion Meter)
*Product Manual Below*
Outline
With the Cardy NO3 Tester , NO3 ion concentration is as simple as placing a tiny sample on the meter's flat sensor. Accurate measurements can be taken from a sample as small as 0.1ml.
Main Uses:
- Measuring leaf sap,
- Measuring soil nitrate levels,
- Measuring foliar and hydroponic fertilizers.
- Measuring concentrations in animal bodily fluids.
- Measuring fruit juices and milk
- Using the sample sheets as a swab, soaked in distilled water and wiping over a hard surface to measure surface nitrate levels.
Main Features
The measurement process simply involves placing the sample on the meter's flat sensor. Accurate measurements can be taken from samples as small as 0.1ml.
Automatic range switching gives a wide display range and facilitates highly precise measurements.
The meter employs a highly selective flat ion electrode. As it is unreceptive to other ions, the electrode takes highly accurate measurements of nitric acid ion concentrations. The new high molecular weight polymers are longer lasting and more resistant to contamination, giving you more troublefree service and saving money on replacements.
Ultrathin and lightweight, the meter can be easily carried to any location for on-site testing.
Highly Affordable
A whole Cardy system meter, sensor and standards costs much less than most ion-selective electrodes. The replacement sensors are many times less expensive. You even economize on samples and solutions since you need only a few drops to make the measurement. Cardy meters are high quality, low upkeep measuring instruments.
NO3 To N Conversion
Remember that when reporting results from a test, it is sometimes standard - such as in soil tests - to report Nitrogen as N. Therefore to convert the results from the Cardy NO3 meter into N, you must multiply the results by 0.226. This is because 22.6% of the atomic weight of NO3 is represented by Nitrogen. For example a 2000ppm NO3 solution contains 452ppm of elemental Nitrogen. Remember that this meter only reports Nitrogen as derived from NO3, it does not represent the total nitrogen or nitrogen present as in other forms.
MODEL |
Horiba Cardy NO3- Meter |
Principle |
Nitrate ion electrode method |
Display |
LCD, 2-digit |
Guarantee range |
62-6200 ppm
(10-3-10-1 mol/l)* |
Display range |
0-99 x 100 ppm |
Resolution |
1 ppm for 0-99 ppm
10 ppm for 10-99 x 10 ppm
100 ppm for 10-99 x 100 ppm |
Calibration |
2-point calibration by STD/SLOPE
controls using standard calibration solutions
STD:2000 ppm, SLOPE: 150 ppm |
Repeatability |
±20% of display value |
Sample temperature |
5-35°C/41-95°F
(temperature compensated at ambient temperature) |
Power |
CR-2025 lithium cell ( x 2)
approx.500 hrs continuous operation |
Weight |
Approx.40g, 1.4oz |
Dimensions |
95 x 55 x 9mm,3.7 x 2.2 x 0.35in |
Standard accessories |
NO3- standard solution
STD 2000 ppm, SLOPE 150 ppm |
Deionized water, sampling sheet,
tweezers, pipet, instruction booklet |
Selectivity coefficient (interfering ions) |
l-=7 x 10-10, Cl-=4 x 10-2, Br-=9 x 10-1, ClO4-=3 x 10-3, NO2-=7 x 10-1, pH range: pH 3-8 (at 10-3 mol/l) |
Cardy NO3 Tester Manual (340,66 KB)
Measuring Soil NO3 With Cardy (96,10 KB)
|