EFFECTIVE DATE: February 27, 2006
(5th Revision)
CANADIAN FOOD INSPECTION AGENCY
59 Camelot Drive
Ottawa, Ontario, Canada, K1A 0Y9
(Tel.: 613-225-2342; Fax: 613-228-6602)
This directive contains the Canadian Growing Media Program (CGMP) and states the phytosanitary import requirements for plants rooted in approved media not containing soil and related matter.
The 2nd revision clarified the requirements for the plant production facilities, approval process, export broker responsibilities, and Permit to Import and inspection requirements for samples sent to the Canadian Food Inspection Agency (CFIA) for evaluation.
The 3rd revision allowed the entry of plants grown in approved media from the continental United States (U.S.).
The 4th revision clarified infested areas in Oregon, US, for Sudden Oak Death.
This revision clarifies the instructions for submitting plant samples with growing media to obtain approval under the CGMP and changes the requirements for the approval of new plant genera from approved Plant Production Facilities. Information for the importation of plants anchored in, or otherwise associated with, non-manufactured forest products is also included.
This directive will be reviewed every 5 years or as needed. The next review date for this directive is February 27, 2011. The contact for this directive is Joanne Rousson. For further information or clarification, please contact the Horticulture Section.
Approved by:
Director
Plant Health Division
Amendments to this directive will be dated and distributed as outlined in the distribution below.
Soil is recognized internationally as a high risk pathway for the introduction of numerous organisms injurious to plants. The introduction of soil-inhabiting pests into Canada could cause an increase in crop production costs, serious crop loss and damage to plants in non-cultivated environments, and loss of export markets for Canadian agricultural and forestry commodities. Section 1.3 of this document lists examples of soil-inhabiting quarantine pests of Canada that are regulated by the Canadian Food Inspection Agency (CFIA). These pests are found in many countries around the world.
Restrictions have been put in place to prevent the introduction into Canada of quarantine pests associated with soil. The importation of soil is prohibited into Canada from all off-continent sources and some areas of the US. The Canadian greenhouse and floriculture industries have expressed a desire to source plants with growing media, as certain plants do not thrive when transported bare-root.
In 1974, the first Canadian Growing Media Program (CGMP) was developed to allow the entry of plants growing in approved media. The program required prior approval for all media, before importation was authorized. Exporting plant production facilities were required to demonstrate fully their ability to meet all requirements before approval was granted. The production facilities were also required to maintain conditions whereby the exported plants and approved media would be free of plant pests and relatively free of other soil-inhabiting organisms.
This program is designed to minimize contamination of media and production area by plant pests. Some measures such as raised benches and disinfection of water and drainage systems are aimed at minimizing infestations by pests such as nematodes which are invisible to the naked eye but are readily transported via water.
Under this program, it is the Plant Production Facility and not the export broker that is approved.
This directive is for use by CFIA inspectors, Canada Border Services Agency, National Plant Protection Organizations in other countries, foreign plant production facilities, brokers and Canadian importers of plants that will be imported in a soil-less growing medium.
D-02-02 Plant Protection Imports Requirements for Rooted, or Unrooted Plants, Plant Parts, and Tissue cultured plants for propagation.
D-95-26 Phytosanitary Requirements for Soil and Related Matter, alone or in association with Plants.
This document supercedes D-96-20, 4th Revision, dated February 22, 2002.
Definitions for terms used in the present document can be found in the Plant Health Glossary of Terms.
The Plant Protection Act, S.C. 1990, c 22
The Plant Protection Regulations, SOR/95-212
Canadian Food Inspection Agency Fees Notice, Canada Gazette, Part 1 (05/13/2000)
The CFIA is charging fees in accordance with the Canadian Food Inspection Agency Fees Notice. For information regarding fees associated with imported product, please contact the Import Service Centres (ISC) at the following phone numbers: Eastern ISC 1-877-493-0468; Central ISC 1-800-835-4486; Western ISC 1-888-732-6222. Anyone requiring other information regarding fees may contact any local CFIA office or Canadian Food Inspection Agency Fees Notice website.
The following list names the major soil borne quarantine pests of Canada, for which specific requirements have been developed. This list is not exhaustive and is subject to change.
Apple maggot, Rhagoletis pomonella (Walsh);
Blueberry maggot, Rhagoletis mendax Curran;
Brown rot, Ralstonia solanacearum race 3, (Pseudomonas
solanacearum);
Columbia root-knot nematode, Meloidogyne chitwoodi (Golden et. al.);
Dwarf bunt, Tilletia controversa (Kuhn);
European brown garden snail, Helix aspersa Mueller;
Golden nematode, Globodera rostochiensis (Woll.);
Japanese beetle, Popillia japonica Newman;
Onion white rot, Sclerotium cepivorum (Berk);
Pale cyst nematode, Globodera pallida (Stone) Behrens;
Potato rot nematode, Ditylenchus destructor (Thorne);
Potato smut, Thecaphora solani (Barrus);
Potato wart, Synchytrium endobioticum Schlib. (Perc);
Soybean cyst nematode, Heterodera glycines (Ichinoe);
Sudden Oak Death, Phythophthora ramorum (Werres et.
al.);
For a more complete list, please refer to the regulated pest list or visit the following CFIA website at : http://www.inspection.gc.ca/english/plaveg/protect/listpespare.shtml
Growing media in which plants, liners, cuttings, slips or seedlings are rooted.
Note: Materials used for packing. Please refer to policy directive D-02-02 for a list of approved packing materials. The general requirements for importing rooted or unrooted plants, plant parts, and tissue cultured plants for planting can be found in policy directive D-02-02. Please refer to CFIA website for detailed information.
Note: Phytosanitary requirements for soil with or without plants are described in D-95-26.
Transparent or translucent aseptic medium for tissue cultured plants.
All countries and territories including the continental US
Plants and growing media must be free of quarantine pests. Plants originating from all countries are subject to the phytosanitary requirements stipulated in policy directives D-95-26 and D-02-02. Please refer to the CFIA website for detailed.
Untreated bark, bark chips, logs, roots, wood, decorative wood and any other non-manufactured forest products are generally prohibited entry into Canada from all countries other than the continental US and additional restrictions and declarations may be required from those regions of the continental US that are regulated. (See policy directive D-02-12).
Specific requirements for the importation of orchids are found in policy directive D-96-09.
To prevent the introduction of quarantine pests associated with soil, plants rooted in approved media may be imported into Canada from regulated areas if:
2.2.1 The plants originate from an export Plant Production Facility approved under the CGMP and;
2.2.2 The Canadian importer holds a valid Permit to Import. A copy of a valid Permit to Import must accompany each shipment including evaluation samples (see Appendix 1). The Permit to Import must state the plant genera and the growing medium combination to be imported, and;
2.2.3 Each shipment must be accompanied by an original Phytosanitary Certificate which indicates the name of the approved production facility and contains the following additional declaration:
"The material was produced in conformance with the Canadian Growing Media Program."
If the production facility is not identified as the exporter on the Phytosanitary Certificate, the production facility name must appear on the Phytosanitary Certificate in the additional declaration section, and;
2.2.4 The Phytosanitary Certificate lists the plants with their scientific name and their associated growing media.
A production facility may be approved to export plants to Canada under the CGMP, if the following production requirements are met, and if the National Plant Protection Organization in the exporting country and CFIA both approve the Plant Production Facility. The production and facility requirements are as follows:
3.1.1 Consist of synthetic or other approved substances (other than soil and related matter) used singly or in combinations. Examples of approved growing media include expanded or baked clay pellets, expanded polystyrene beads, floral foam, ground coconut husk, ground cocoa pods, ground coffee hulls, ground rice husk, peat, perlite, pumice, recycled paper, rock wool, sawdust, sphagnum, styrofoam, synthetic sponge, vermiculite, and volcanic ash or cinder.
3.1.2 Contain only substances that were not used previously for growing plants or other agricultural purposes.
3.1.3 Remain free of, or rendered inherently free of, plant pests.
3.1.4 Remain free of sand, soil, and related matter.
3.2.1 Be of a construction that encloses the plant production area (for instance, a rigid construction equipped with insect-proof screening in vents and automatic or self closing double doors at the entry into the facility) or be of a construction specifically approved by the Plant Health Division of CFIA as appropriate for minimizing pest risk in a specific situation.
3.2.2 Be free of soil, sand and related matter.
3.2.3 Be isolated from adjoining facilities where soil and related matter is used or stored.
3.2.4 Have raised benches that are high enough above the floor to avoid any pest contamination from the ground or water splashing. CFIA may approve other systems that minimize the risk of pest contamination from the ground or water splashing on a case by case basis.
3.2.5 Have an entry way and floors that can easily be decontaminated as required (for instance, an entry way and floors that are constructed of an impermeable solid material such as cement, ceramic, concrete, steel, tiles). CFIA may approve other entry and floor material on a case by case basis.
3.2.6 Have a drainage system that can be decontaminated as required.
3.3.1 The use of clean water (e.g., treated, disinfected, or heated to eliminate live plant pathogens and invertebrates) during production. Municipal tap water, as long as it has been appropriately treated by the municipality, is acceptable.
3.3.2 Grow plants in a manner that avoids contamination from the floor or structure of the production facility. This may include production of plants on raised benches where the benches are high enough above the floor to avoid pest contamination from the ground and splashing water, or other production systems approved by the CFIA.
3.3.3 Measures to prevent the entry and establishment of plant pests in growing media and to eliminate plant pests on the plant foliage and in the production facility.
3.3.4 Pest control products applied to the drainage system area and to the raised benches to prevent the establishment of plant pests in these areas.
3.3.5 The maintenance of the production facility in a clean state by routine disinfection of floors, benches, handling equipment and tools.
3.3.6 The storage of growing media separately to safeguard from other sources of contamination.
3.3.7 Restricted access to the production facility to only authorized personnel that are familiar with the program requirements and are aware of the need to follow strict phytosanitary practices.
These procedures apply to all plants intended for export to Canada, and to the propagative stock materials being used for the production of those plants.
3.4.1 Approval of New Plant Production Facilities
3.4.1.1 The exporting Plant Production Facility or the broker must first contact the National Plant Protection Organization in the exporting country to discuss prior approval procedures or to initiate a review.
3.4.1.2 For each new production facility intending to export plants in growing media to Canada, the foreign National Plant Protection Organization shall:
3.4.1.3 A Canadian importer must apply for and obtain a specific Canadian Permit to Import for the evaluation of samples from the production facility. The Permit to Import must specify which growing media and plant genera and species the foreign Plant Production Facility is intending to send for evaluation and that the samples are being sent to the CFIA/CPQP laboratory. Please refer to Appendix 1 for detailed instructions.
3.4.1.4 Once the Permit to Import for the samples is issued, the exporting Plant Production Facility sends representative samples to the CFIA/CPQP laboratory for evaluation following the requirements outlined on the Permit to Import and according to the instructions outlined in Appendix 1.
3.4.1.5 CFIA approves exporting plant production facilities under the CGMP for the purpose of exporting plants rooted in the approved growing medium to Canada if:
3.4.1.6 CFIA advises the National Plant Protection Organization in the exporting country as to whether the production facility is approved.
3.4.1.7 Once approved, CFIA adds the exporting Plant Production Facility to CFIA's list of approved production facilities, growing media and plant genera. Access to this list is limited due to the confidential, proprietary information it contains. This list is maintained by CFIA and is only available to CFIA staff on the Intranet (Merlin).
3.4.2 For an Approved Plant Production Facility to Maintain Approval
The foreign National Plant Protection Organization must inspect the production facility regularly, not less than twice per year. Conditions in sections 3.2 and 3.3 must continue to be met and only approved growing media can be used for export to Canada.
3.4.3 Approval of a New Growing Medium or a New Plant Genera from an Approved Plant Production Facility
Each time an approved production facility wants to export plants grown in a new medium and/or new plant genera, in an already approved medium or new medium, it must meet the following requirements before commercial shipments may be permitted entry into Canada.
3.4.3.1 For each approved production facility intending to export new plant genera and/or plants in a new growing media to Canada, the foreign National Plant Protection Organization shall:
3.4.3.2 A Canadian importer must apply for and obtain a specific Canadian Permit to Import for the evaluation of samples from the production facility. The Permit to Import must specify which growing media and plant genera and species the foreign Plant Production Facility is intending to send for evaluation and indicate that the destination of the samples is the CFIA/CPQP laboratory. Please refer to Appendix 1 for detailed instructions.
3.4.3.3 Once the Permit to Import for the samples is issued, the exporting Plant Production Facility sends representative samples to CFIA/CPQP laboratory for evaluation following the requirements outlined on the Permit to Import and according to the instructions outlined in Appendix 1.
3.4.3.4 CFIA advises the National Plant Protection Organization in the exporting country as to whether the new growing medium is approved.
3.4.3.5 Once approved, CFIA adds the new media and / or new genus to CFIA's list of approved production facilities, growing media and plant genera. Access to this list is limited due to the confidential, proprietary information it contains. This list is maintained by CFIA and is only available to CFIA staff on the Intranet (Merlin).
Shipments of plants in approved media from approved production facilities are subject to inspection and audit sampling on arrival to ensure compliance with CGMP requirements, and to verify the absence of plant pests and soil.
3.5.1 For those shipments inspected, CFIA will:
3.5.2 For shipments of samples for evaluation to obtain approval under the CGMP, CFIA must:
Shipments which do not meet requirements, or are found to be infested with quarantine pests or potential quarantine pests, may be refused entry, returned to origin, or disposed of at the importer's expense. The importer is responsible for any and all costs relating to treatment, disposal, removal or rerouting, including costs incurred by CFIA to monitor the action taken.
The discovery of any quarantine plant pest in the growing medium will result in an immediate suspension of importation from that facility.
Production facilities that do not consistently meet the phytosanitary standards and/or that violate any phytosanitary requirement will be suspended from the CGMP. The Plant Health Division of the CFIA will advise the National Plant Protection Organization in the exporting country of pest interceptions and non-compliance with the CGMP.
CFIA may inspect production facilities on-site, review inspection methods and pest management programs, inspect plants intended for export and stock plants used for propagation, and verify the origin of material shipped to Canada for compliance.
Appendix 1: Instructions for Exporting Plant Production Facilities for Submitting Plant Samples with their Growing Media for Prior Approval Under
the CGMP
Appendix 2: Submission of Audit Samples From Consignments Imported Under the CGMP for
CFIA Inspectors
An additional declaration, indicating the name and address of the production facility, must be included on the Phytosanitary Certificate if the production facility is different from the exporter.
Plant Health Division
Canadian Food Inspection Agency
59 Camelot Drive
Ottawa, Ontario
K1A 0Y9
Tel.: 613-225-2342
Fax.: 613-228-6603
This will help ensure that shipments be traced to destination upon their arrival in Canada.
Centre for Plant Quarantine Pests
Canadian Food Inspection Agency
Ottawa Laboratory (Fallowfield) ADRI-CPQP
3851 Fallowfield Road, Building 201
OTTAWA, ONTARIO K2H 8P9 Canada
Telephone : 613- 228-6698
The samples should proceed directly to the CFIA/CPQP laboratory where they will be inspected. An original Phytosanitary Certificate must accompany the samples. All costs associated with importing and routing of samples for assessment will be the responsibility of the Canadian importer.
Please note that two separate Import Permits are required, one for the samples and another for any commercial shipments.
Centre for Plant Quarantine Pests
Canadian Food Inspection Agency
Ottawa Laboratory (Fallowfield) ADRI-CPQP
3851 Fallowfield Road, Building 201
OTTAWA, ONTARIO K2H 8P9 Canada
Telephone : 613-228-6698