Propane Vaporization Chart,
Properties and Combustion Data |
VAPORIZATION RATE
- 100 lb. Propane Cylinder (Approx)
Pounds
of propane in cylinder |
Maximum
continuous draw in BTU/hr at various temperatures in
degrees F. |
0° |
20° |
40° |
60° |
70° |
100 |
113,000 |
167,000 |
214,000 |
277,000 |
300,000 |
90 |
104,000 |
152,000 |
200,000 |
247,000 |
277,000 |
80 |
94,000 |
137,000 |
180,000 |
214,000 |
236,000 |
70 |
83,000 |
122,000 |
160,000 |
199,000 |
214,000 |
60 |
75,000 |
109,000 |
140,000 |
176,000 |
192,000 |
50 |
64,000 |
94,000 |
125,000 |
154,000 |
167,000 |
40 |
55,000 |
79,000 |
105,000 |
131,000 |
141,000 |
30 |
45,000 |
66,000 |
85,000 |
107,000 |
118,000 |
20 |
36,000 |
51,000 |
68,000 |
83,000 |
92,000 |
10 |
28,000 |
38,000 |
49,000 |
60,000 |
66,000 |
This chart shows the vaporization
rate of containers in terms of the temperature of the liquid
and the wet surface area of the container. When the temperature
is lower or if the container has less liquid in it, the vaporization
rate of the container is a lower value. |
PROPANE
DATA |
Properties
of Propane: |
Chemical Formula |
C3H8 |
BTU per Gallon (Vaporized) |
91,690 |
BTU per Pound |
21,591 |
Weight per Liquid Gallon |
4.23 |
Vaporization Temperature
|
44°F |
Specific Gravity - Vapor
(Air=1) |
1.53 |
Specific Gravity - Liquid
(Water=1) |
0.51 |
Vaporization Rate (Liquid
to Vapor) |
272:1 |
Combustion
Data : |
Limits of Flammability,
%of gas in air |
2.3%
to 9.5% |
Air required to burn
1 Cu Ft Vapor |
23.5
Cu Ft |
Oxygen required to burn
1 Cu Ft Vapor |
4.9
Cu Ft |
Ignition Temperature
|
920-1029°F |
Optimum Flame Temperature |
3500°F |
Vapor Pressure at 0°F |
28
PSI |
Vapor Pressure at 70°
F |
122
PSI |
Vapor Pressure at 100°
F |
190
PSI |
|
Propane Vapor Pressure Chart, PSI
|
OUTSIDE
TEMPERATURE, DEGREES FAHRENHEIT |
30° |
20° |
10° |
0° |
10° |
20° |
30° |
40° |
50° |
60° |
70° |
80° |
90° |
100° |
110° |
100% Propane |
6.8 |
11.5 |
17.5 |
24.5 |
34 |
42 |
53 |
65 |
78 |
93 |
110 |
128 |
150 |
177 |
204 |
|
VAPOR
PRESSURE, PSI |
Check List For Safe LP Gas Use:
1. DO NOT use torches on or near combustible
materials.
2. Inspect equipment daily.
3. Secure cylinders in a level, upright position. DO NOT invert
or lay cylinders on their sides.
4. Use only vapor equipment on cylinders equipped with vapor withdrawal
valves. Use only liquid equipment on cylinders designed for liquid
withdrawal. DO NOT invert vapor cylinders to dispense liquid.
5. DO NOT apply flame to cylinders to increase pressure.
6. DO NOT operate torches or any equipment if the odor of LP Gas
(butane/propane) is evident. Immediately shut off all valves and,
using soapy water, check all equipment for leaks.
7. LP Gas (butane/propane) is heavier than air which causes it to
accumulate in low areas. Check low areas for accumula- tion and
ventilate. Be certain all work areas are well ventilated.
8. Keep torches, open flame, and sources of ignition away from cylinders,
regulators, and hose.
9. Cylinder valves must be protected. DO NOT hoist cylinder by the
valve.
10. Gloves should be used at all times. Long sleeves, long pants,
and boots are recommended.
11. Never leave a lighted torch unattended.
12. For more detailed information, consult your local LP dealer,
Flame Engineering, NPGA, NRCA, or NFPA Pamphlet 58. This information
is provided as a general guide for safe LP- Gas use and in no way
constitutes a complete safety program.
Daily Equipment Check List
1. Be sure you have a fire extinguisher
(type ABC) on the job, easily accessible to each worker.
2. Check LP cylinders for dents, damage to collar, damage to valve
or corroded foot ring. Never hoist a cylinder by the valve. Secure
cylinders in an upright position. Know whether you are using LIQUID
or VAPOR WITHDRAWAL.
3. Visually inspect all parts for damage and wear.
4. Using soapy water, check all connections and fittings for leaks.
DO NOT use a match or open flame.
5. Ignite torch. Check operation of valve and other adjustable parts.
SAFETY NOTES:
When extinguishing a torch, shut off cylinder valve and allow
gas to burn out of lines.
Be certain to comply with all safety guidelines and local
ordinances regarding the use of an open flame.
Please contact Flame Engineering, your local LP-Gas dealer
or fire officials if you have questions regarding proper oper- ating
procedures and safety guidelines.
CAUTION:
Propane is heavier than air which causes it to accumulate
in low areas. Be certain all areas are well ventilated.
Propane has a distinct odor. If you smell it, immediately
discontinue work, extinguish all flames, find the leak and correct
it.
WARNING:
Use extreme caution at all times. You are using an intense open
flame. Disregard of safe practices can result in severe fire damage,
serious personal injury or death.
Back
To Top
|