Search NIOSH | NIOSH Home | NIOSH Topics | Site Index | Databases and Information Resources | NIOSH Products | Contact Us |
NIOSH Programs > Engineering Controls > Presentations Engineering ControlsOutputs: PresentationsA hot topic: improving ventilation equations for exothermic processes A Sound Power Level Study of a Roof Bolter Alternative dust control techniques to minimize the necessity for local exhaust ventilation An overview of standing roof support practices and developments in the United States Analysis and design of rib support (ADRS): a rib support design methodology for Australian collieries Application of Ground Penetrating Radar to Evaluate the Extent of Polyurethane Grout Infiltration for Mine Roof Control: A Case Study Characteristics of mining-induced seismicity associated with roof falls and roof caving events Commercialization of cost-effective rollover protective structures (CROPS): research-in-progress Comparing estimated low back loads from control interventions for underground coal mine roof bolter operators Design improvements in operator cab seat and vibration considerations for low-coal shuttle car haulage in underground mines Design recommendations for controlling the jam-clearing hazard on recycling industry balers Development of a lower pressure, water-powered spot scrubber for mining applications Diesel particulate matter control technologies and measurements in U.S. mines Digital measurement of human proximity to electrical power circuit by a novel amplitude-shift-keying radio-frequency receiver Effect of the dip and excavation orientation on roof stability in moderately dipping stone mine workings Effective control of respirable dust in underground coal mines in the United States effects of alternative fuels on concentrations of nanometer and ultrafine particles in underground mine Effects of construction stilts on gait characteristics and joint loadings Engineering evaluations of healthcare facilities in Banda Aceh following the earthquake and tsunami part 1 Evaluation of a high-efficiency filter-bank system Evaluation of diesel emission control technologies used in U.S. underground coal and noncoal mines Evaluation of mine seals using ground penetrating radar Experimental and modeling investigation of the effect of ventilation on smoke rollback in a mine entry Field evaluation of a continuous passive lumbar motion system Ground control design for highwall mining Implementing a new personal dust monitor as an engineering tool Injury potential to a seat-belted operator during a rearward or sideward overturn of a ROPS-equipped farm tractor Interventions taken at a homeless shelter to reduce transmission of tuberculosis Investigation of Fully Grouted Roof Bolts Installed Under In Situ Conditions Long-term evaluation of diesel particulate filter systems at inco's stobie mine Methods for evaluating explosion-resistant ventilation structures NIOSH autoROPS research to practice: zero turn commercial mowers Noise and vibration reduction of a vibrating screen Numerical analysis of the impact of longwall panel width on methane emissions and performance of gob gas ventholes Practical experiences with the use of water as a dust control measure for scabbling and jackhammering concrete Reducing rock fall injuries in underground U.S. coal mines Reducing vehicle crash-related EMS worker injuries through improvements in restraint systems State of the Art in Monitoring Respirable Mine Aerosols Testing and evaluation of an engineering noise control on a longwall stageloader Update of Span Design Curve for Weak Rock Masses Using guardrail systems to prevent falls through roof and floor holes Using ultrasonic anemometers to evaluate factors affecting face ventilation effectiveness Using ventilation control technology to reduce respirable dust exposures at U.S. metal/nonmetal mining operations |
NIOSH Program Portfolio:Engineering Controls |
||||||