Agent Name |
Talc (containing no asbestos) |
CAS Number |
14807-96-6 |
Formula |
H2-O3-Si. 3/4Mg |
Major Category |
Mineral Dusts |
Synonyms |
Hydrous magnesium silicate; Steatite talc; [NIOSH] |
Category |
Other Mineral Dusts |
Description |
Odorless, white powder; Containing no asbestos and less than 1% quartz; [NIOSH] |
Sources/Uses |
Used as a paint additive and rubber lubricant; [Levy, p. 565] Crystalline silica not bound to other minerals is "free" silica. Silicates are minerals in which silicon and oxygen are combined with other elements. [Rom, p. 364] |
Comments |
Interstitial fibrosis can develop in workers heavily exposed to talc, but it is not yet clear how much is due to talc versus talc contaminants. [Harber, p. 349] |
Exposure Assessment |
Skin Designation (ACGIH) |
No |
TLV (ACGIH) |
2 mg/m3, respirable fraction |
PEL (OSHA) | 20 mppcf, containing < 1% quartz |
IDLH (NIOSH) |
1000 mg/m3 |
Excerpts from Documentation for IDLHs |
Basis for revised IDLH: The available toxicological data contain no evidence that an acute exposure to a high concentration of talc would impede escape or cause any irreversible health effects within 30 minutes. However, the revised IDLH for talc is 1,000 mg/m3 based on being 500 times the NIOSH REL of 2 mg/m3 (500 is an assigned protection factor for respirators and was used arbitrarily during the Standards Completion Program for deciding when the "most protective" respirators should be used for particulates). |
Explanatory Notes |
See 2008 Notice of Intended Changes. [ACGIH] |
Adverse Effects |
Fibrogenic |
Yes |
IARC Carcinogen |
Not Classifiable |
Links to Other NLM Databases |
Health Studies |
Human Health Effects from Hazardous Substances Data Bank: TALC
|