 |
|
|
|
|
|
|
 |
|
|
|
Manufacturer
|
| Alberto Culver Company |
| 2525 Armitage Avenue |
| Melrose Park |
| IL |
| 60160 |
| 708-450-3000 |
| 708-450-3382 |
| 800-333-6666 |
| 2008-01-09 |
| Products by this manufacturer |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS.
(Complete MSDS for this product)
|
|
|
|
|
Health Effects
|
|
| MSDS: Refer to Handling |
From MSDS
Hazards Identification
Emergency overview - Causes severe skin and eye burns. Irritating to respiratory system.
Potential health effects
Routes of exposure - Ingestion. Skin contact. Inhalation.
Eyes - Avoid contact with eyes. This product causes eye burns. Risk of serious damage to eyes.
Skin - Avoid contact with the skin. Causes skin burns.
Inhalation - Do not breathe gas/fumes/vapor/spray. Irritating to respiratory system.
Ingestion - Do not ingest. Ingestion may produce burns to the lips, oral cavity, upper airway, esophagus and possibly the digestive tract.
Target organs - Eyes. Skin. Gastrointestinal tract.
|
From MSDS
Prolonged exposure may cause chronic effects.
|
From MSDS
Composition Comments This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
|
From MSDS
Eye contact - Immediately flush eyes with plenty of water for at least 20 minutes. get medical attention immediately.
Skin contact - Wash off with soap and water. Remove and isolate contaminated clothing and shoes. For minor skin contact, avoid spreading material on unaffected skin. If skin irritation persists, call a physician.
Inhalation - Move to fresh air. If breathing is difficult, give oxygen. Oxygen or artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of pocket mask equipped with a one-way valve or other proper respiratory medical device.
General advice - Ensure that medical personnel are aware of the material's) involved, and take precautions to protect themselves. In case of shortness of breath, give oxygen. In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
|
| 3 |
| 1 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2006-01-06 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Do not get this material in your eyes, on your skin, or on your clothing. Do not breath gas/fumes/vapor/spray.
Storage - Keep container tightly closed. Keep the container dry. Store in a cool place. Keep in a well-ventilated place. Keep out of the reach of children. Use care in handling/storage. Keep this material away from food, drink and animal feed.
|
From MSDS
Waste Codes - D002: Waste Corrosive material [pH<=2 or =>12.5, or corrosive to steel]
Disposal Instructions - Dispose in accordance with all applicable regulations. must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities. Incinerate the material under controlled conditions in approved incinerator.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
