BAC Local's Respirator Program Benefits Workers
and Contractors
(Taken from On Center July 2003) |
|
International
Union of Bricklayers and Allied Craftworkers
Tuckpointers local 52 in Chicago has taken labor-management cooperation
to a new level to protect the health of its members. A respirator
program run by the union but funded by employers helps meet OSHA requirements
for worker protections, reducing exposures to silica. The program
controls costs by avoiding unnecessary repeat fit-tests and medical
evaluations.
And, because workers are consistently wearing full-face masks, it's
also reducing eye injuries from flying masonry grit. An eye injury
reportedly can cost up to $1,000 for medical care and time off.
"In the beginning, there was some resistance," said Bill Meyers, business
representative for the local union. "But [now] there's a very positive
reaction from workers. The employers are pleased they can get to work
right away without taking a day off for fit testing and evaluation.
" Many of the local union's 1,600 members work in masonry restoration,
removing old mortar for repointing. They use electric saws, grinders
(chop saws), and electric wrecking hammers to dry-cut, chip, or remove
mortar or concrete. In the process, silica dust fills the air.
Silica can damage the lungs, causing shortness of breath. In time,
silicosis can kill. Silica exposures increase the chances of getting
tuberculosis and lung cancer.
In 2000, after OSHA inspectors found five worksites in the Chicago
area not complying with the requirements for a silica-protection program,
the Tuckpointing Contractors Association in northeastern Illinois
and the union set up the Tuckpointing Industry Promotional Fund to
provide a program with OSHA input.
OSHA holds employers responsible for a respiratory-protection program
to protect against silica exposures and each contractor must have
a written site plan. Before masonry restoration begins, there must
be a written safety-and-health program, medical evaluation of new
workers, a breathing test (in some cases), and proper fitting of a
full-face double-cartridge respirator.
But, with contractor encouragement, the local union got OSHA approval
to coordinate a program. A union member serves as part-time program
coordinator, with help from an outside contractor. The program cost,
about $180 per worker per year, is built into the negotiated wage.
During winter layoff, silica awareness, scaffold, and OSHA 10-hour
training are given at the local union hall. In March each worker gets
an annual respirator-fit test at the union hall. Every third year,
a worker is given a medical evaluation of fitness to use a respirator.
(New workers may get an evaluation and fit testing some evenings during
the work season.)
Each worker is given a red card to show employers when the last fit
test and medical evaluation were done. The worker is paid for the
two hours that program participation requires. Respirator parts and
filters are provided free.
Any worker who is found grinding masonry without wearing a respirator
is disciplined with, first, a warning, then a day off without pay,
then termination.
|
This paper appears in the eLCOSH website with the permission of the author
and/or copyright holder and may not be reproduced without their consent.
eLCOSH is an information clearinghouse. eLCOSH and its sponsors are not
responsible for the accuracy of information provided on this web site, nor
for its use or misuse.
eLCOSH
| CDC | NIOSH
| Site Map | Search
| Links | Help
| Contact Us | Privacy Policy
|