[Date Prev][Date Next][Index][Thread]
[SGT Mail Archive]
[SGT Main Page]
RE: Réf. : Using SimpleGrid...?
*************************************************
Message from the sgt mail list.
*************************************************
OK...now I'm doing it
I'll bet the perpetrator is: Administrator@noaaspam06.newworldapps.com
John T. Pearson, Jr., GG-13, DAF
Senior IO Analysis Modeling & Simulation Engineer
RF Sensors, Communications, Navigation and Identification Systems Analysis
Element
Electronic Warfare Analysis Flight (EWA)
453 Electronic Warfare Squadron (453 EWS)
318 Information Operations Group (318 IOG)
Air Force Information Warfare Center (AFIWC)
Air Intelligence Agency (AIA)
Air Combat Command (ACC)
United States Air Force (USAF)
453 EWS/EWA
102 Hall St, Ste 338
San Antonio, TX 78243-7020
Voice: (210) 977-2427, DSN 969-2427; STU-III Capable
FAX: (210) 977-4586, DSN 969-4586 NON-SECURE
SECURE FAX: (210) 977-4680, DSN 969-4860 (auto receive PM only)
NSTS: 973-6147
Home: rcd2951@satx.rr.com UNCLASSIFIED ONLY
NIPRNET: john.pearson@lackland.af.mil UNCLASSIFIED ONLY
SIPRNET: john.pearson@afiwc.aia.kelly.af.smil.mil
JWICS: john.pearson@afiwc.aia.ic.gov
-----Original Message-----
From: kohlja@ornl.gov [mailto:kohlja@ornl.gov]
Sent: Friday, April 29, 2005 11:01 AM
To: Administrator@noaaspam06.newworldapps.com
Cc: James Kohl; sgt@noaa.gov
Subject: Re: Réf. : Using SimpleGrid...?
*************************************************
Message from the sgt mail list.
*************************************************
*************************************************
Message from the sgt mail list.
*************************************************
On Fri, Apr 29, 2005 at 11:44:07AM +0200, Laurent BEIGBEDER wrote:
> Hi,
Hi Laurent,
Thanks for your reply (all 12 copies of it! :).
> What do you mean by associatedData?
I must not be using SimpleGrid correctly - I had tried passing a SimpleGrid
instance directly into the rpl.addData() call, and it generated a Null
Pointer exception, so I did some browsing through the Java Docs and thought
that perhaps I needed to pass instead SimpleGrid.getAssociatedData()...
> I use it with double arrays with following constraints: grid.length ==
> xloc.length*yloc.length
This seems to be the problem - I was passing in values like this:
grid[0] = Z0 / xloc[0] = X0 / yloc[0] = Y0
grid[1] = Z1 / xloc[1] = X1 / yloc[1] = Y1
grid[2] = Z2 / xloc[2] = X2 / yloc[2] = Y2
. . .
So are you saying that I should have passed in:
grid[0] = Z(X0,Y0)
grid[1] = Z(X0,Y1)
grid[2] = Z(X0,Y2)
. . .
and
xloc[] = { 0, 1, 2, . . . , ncols - 1 }
yloc[] = { 0, 1, 2, . . . , nrows - 1 }
???
I thought I had already tried this, but let me look again...
Please clarify if I'm still not understanding SimpleGrid usage...!
> then, if sg is the new SimpleGrid.
> sg.setXMetaData(new SGTMetaData("Distance","km"));
> sg.setYMetaData(new SGTMetaData("Height","m"));
> sg.setZMetaData(new SGTMetaData("Depth","cm"));
Is is *necessary* to set this MetaData...?
Please let me know. I wasn't doing this either...
Thanks Much! :-)
Jim
> then put it in a JPlotLayout
> /*
> * Create the layout without a Logo image and with the
> * ColorKey on a separate Pane object.
> */
> JPlotLayout rpl = new JPlotLayout(true, false, false, "test layout",
> null, true);
> rpl.setEditClasses(false);
> /*
> * Create a GridAttribute for CONTOUR style.
> */
> Range2D datar = new Range2D(-20.0f, 45.0f, 5.0f);
> //Range2D datar = new Range2D(0.0f, 1.0f, 5.0f);
> clevels = ContourLevels.getDefault(datar);
> gridAttr_ = new GridAttribute(clevels);
> /*
> * Create a ColorMap and change the style to RASTER_CONTOUR.
> */
> ColorMap cmap = createColorMap(datar);
> gridAttr_.setColorMap(cmap);
> gridAttr_.setStyle(GridAttribute.RASTER_CONTOUR);
> /*
> * Add the grid to the layout and give a label for
> * the ColorKey.
> */
> rpl.addData(newData, gridAttr_, "Test data");
> rpl.setTitles("Demo d'essai",
> "Utilisant JPlotLayout",
> "et voila =)","");
> rpl.setSize(new Dimension(500, 400));
> rpl.setKeyLayerSizeP(new Dimension2D(2.0, 6.0));
> rpl.setKeyBoundsP(new Rectangle2D.Double(0.01, 5.99, 1.98, 5.98));
> Regards,
> Laurent BEIGBEDER
> GFI Informatique
> Toulouse - FRANCE
> Veuillez répondre à James Kohl <kohlja@ornl.gov>
> Pour : sgt@noaa.gov
> cc : kohlja@ornl.gov
> Objet : Using SimpleGrid...?
> *************************************************
> Message from the sgt mail list.
> *************************************************
> Help!
> I'm a new user, trying to use SGT for a simple applet
> demo, and cannot seem to create a valid SimpleGrid for
> passing into a JGridDemo setup... (I have started
> with your JGridDemo.java example, and am trying
> to replace the TestData with my own data grid).
> I have created a SimpleGrid using the
> ( double [] grid, double [] xloc, double [] yloc, String )
> constructor, with X and Y coordinates in xloc[] and yloc[],
> resp, and Z values in grid[], but the resulting SimpleGrid
> has null "AssociatedData"...?!
> How do I get my "Z" values (the actual data) into the grid?
> Any help would be greatly appreciated, ASAP!
> Thanks Much!
> James Kohl, PhD
> Oak Ridge National Laboratory
> *************************************************
> To remove yourself from this mailing list,
> send mail to <epic-majordomo@noaa.gov> with
> "unsubscribe sgt" in the message body.
> ==========
*************************************************
To remove yourself from this mailing list,
send mail to <epic-majordomo@noaa.gov> with
"unsubscribe sgt" in the message body.
==========
*************************************************
To remove yourself from this mailing list,
send mail to <epic-majordomo@noaa.gov> with
"unsubscribe sgt" in the message body.
==========
*************************************************
To remove yourself from this mailing list,
send mail to <epic-majordomo@noaa.gov> with
"unsubscribe sgt" in the message body.
==========
Privacy Notice,
External Links Disclaimer.