Engineering Controls
Outputs: Presentations
A hot topic: improving ventilation equations for exothermic processes
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
A Sound Power Level Study of a Roof Bolter
SME Conference, Salt Lake City, Utah, 2005
Alternative dust control techniques to minimize the necessity for local exhaust ventilation
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
An overview of standing roof support practices and developments in the United States
Best Practices in Rock Engineering, Proceedings of the Third Southern African Rock Engineering Symposium, October 10-12 , 2005, SARES 2005
Analysis and design of rib support (ADRS): a rib support design methodology for Australian collieries
24th International Conference on Ground Control in Mining, August 2-4, 2005, Morgantown, West Virginia
Application of Ground Penetrating Radar to Evaluate the Extent of Polyurethane Grout Infiltration for Mine Roof Control: A Case Study
23rd International Conference on Ground Control in Mining, Morgantown, West Virginia
Characteristics of mining-induced seismicity associated with roof falls and roof caving events
40th U.S. Rock Mechanics Symposium, June 25-29, 2005, Anchorage, Alaska
Commercialization of cost-effective rollover protective structures (CROPS): research-in-progress
National Institute for Farm Safety (NIFS) Annual Conference, June 26-30, 2005, Wintergreen, Virginia
Comparing estimated low back loads from control interventions for underground coal mine roof bolter operators
KOMTECH Sixth International Scientific and Technical Conference, November 14-17, 2005, Zakopane, Poland
Design improvements in operator cab seat and vibration considerations for low-coal shuttle car haulage in underground mines
ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida
Design recommendations for controlling the jam-clearing hazard on recycling industry balers
ASME International Mechanical Engineering Congress & Exposition, November 5-11, 2005, Orlando, Florida
Development of a lower pressure, water-powered spot scrubber for mining applications
2005 SME Annual Meeting, February 28-March 2, Salt Lake City, Utah
Diesel particulate matter control technologies and measurements in U.S. mines
Eighth International Mine Ventilation Congress, July 6-8, 2005, Brisbane, Queensland, Australia
Digital measurement of human proximity to electrical power circuit by a novel amplitude-shift-keying radio-frequency receiver
IEEE International Symposium on Circuits and Systems (ISCAS) May 23-26, 2005, International Conference Center, Kobe, Japan
Effect of the dip and excavation orientation on roof stability in moderately dipping stone mine workings
40th U.S. Rock Mechanics Symposium, June 25-29, 2005, Anchorage, Alaska
Effective control of respirable dust in underground coal mines in the United States
Eighth International Mine Ventilation Congress, Brisbane, July 6-8, 2005, Queensland, Australia
effects of alternative fuels on concentrations of nanometer and ultrafine particles in underground mine
Ninth ETH Conference on Combustion-Generated Nanoparticles, Aug. 15-17, 2005, Zurich, Switzerland
Effects of construction stilts on gait characteristics and joint loadings
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Engineering evaluations of healthcare facilities in Banda Aceh following the earthquake and tsunami part 1
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Evaluation of a high-efficiency filter-bank system
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Evaluation of diesel emission control technologies used in U.S. underground coal and noncoal mines
31st International Conference of Safety in Mines Research Institutes, 2-5 October 2005, Brisbane, Queensland, Australia
Evaluation of mine seals using ground penetrating radar
Symposium on the Application of Geophysics to Engineering and Environmental Problems (SAGEEP 2005) Environmental and Engineering Geophysical Society, 2005, Denver, Colorado
Experimental and modeling investigation of the effect of ventilation on smoke rollback in a mine entry
2005 SME Annual Meeting, February 28-March 2, Salt Lake City, Utah
Field evaluation of a continuous passive lumbar motion system
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Ground control design for highwall mining
2005 SME Annual Meeting, February 28-March 2, Salt Lake City, Utah
Implementing a new personal dust monitor as an engineering tool
IOHA 2005—6th International Scientific Conference of the International Occupational Hygiene Association, September 19-23, 2005, Pilanesberg National Park, North West Province, South Africa
Injury potential to a seat-belted operator during a rearward or sideward overturn of a ROPS-equipped farm tractor
National Institute for Farm Safety (NIFS) Annual Conference, June 26-30, 2005, Wintergreen, Virginia
Interventions taken at a homeless shelter to reduce transmission of tuberculosis
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Investigation of Fully Grouted Roof Bolts Installed Under In Situ Conditions
24th International Conference on Ground Control in Mining. Morgantown, West Virginia: West Virginia University: 302-312
Long-term evaluation of diesel particulate filter systems at inco's stobie mine
Eighth International Mine Ventilation Congress, July 6-8, 2005, Brisbane, Queensland, Australia
Methods for evaluating explosion-resistant ventilation structures
Eighth International Mine Ventilation Congress, July 6-8, 2005, Brisbane, Queensland, Australia
NIOSH autoROPS research to practice: zero turn commercial mowers
ASME International Mechanical Engineering Congress & Exposition, November 5-11, 2005, Orlando, Florida
Noise and vibration reduction of a vibrating screen
SME Annual Meeting, February 28-March 2, 2005, Salt Lake City, Utah
Numerical analysis of the impact of longwall panel width on methane emissions and performance of gob gas ventholes
International Coalbed Methane Symposium, 2005, Tuscaloosa, Alabama
Practical experiences with the use of water as a dust control measure for scabbling and jackhammering concrete
American Industrial Hygiene Conference and Expo, May 21-26, 2005, Anaheim, California
Reducing rock fall injuries in underground U.S. coal mines
31st International Conference of Safety in Mines Research Institutes, October 2-5 2005, Brisbane, Queensland, Australia
Reducing vehicle crash-related EMS worker injuries through improvements in restraint systems
XVIIth World Congress on Safety and Health at Work, September 16-20, 2005
State of the Art in Monitoring Respirable Mine Aerosols
31st International Conference of Safety in Mines Research Institutes, October 2-5, 2005, Brisbane, Australia: 138-139
Testing and evaluation of an engineering noise control on a longwall stageloader
2005 SME Annual Meeting, February 28-March 2, Salt Lake City, Utah
Update of Span Design Curve for Weak Rock Masses
CIM Mining Industry Conference and Exhibition, Edmonton, Canada Institute of Mining, Alberta, Canada
Using guardrail systems to prevent falls through roof and floor holes
XVIIth World Congress on Safety and Health at Work, September 16-20, 2005
Using ultrasonic anemometers to evaluate factors affecting face ventilation effectiveness
SME Annual Meeting, February 28-March 2, 2005, Salt Lake City, Utah
Using ventilation control technology to reduce respirable dust exposures at U.S. metal/nonmetal mining operations
Eighth International Mine Ventilation Congress, July 6-8, 2005, Brisbane, Queensland, Australia
