Dr. Jim Beuerlein
The objective of this fact sheet is to explain how and why grain test weight is used in the grain market and how producers can ensure acceptable test weights from their crop production program
Bushel is a volume measurement for grain created many years ago by Celtic peoples (Scotland, Wales, Brittany, Ireland) to facilitate fair grain trade. The bushel measurement was not defined in terms of cubic feet, but is currently considered to be about 1.25 cubic feet in volume. Although grain is referred to in terms of bushels in the United States, it is referenced and traded on the basis of weight (tons or metric tons) throughout the rest of the world. To facilitate the trading of grain, the USDA created weight standards for each grain so that grain could be weighed to determine the number of bushels rather than trying to make volume measurements. Corn was assigned a bushel weight of 56 pounds, while soybeans and wheat were assigned bushel weights of 60 pounds. Some other examples are: Rye = 56 pounds per bushel, barley = 48, oat and fescue = 32, etc.
The Test weight concept was developed many years ago by the grain trade as a means of accounting for the varying densities of grain caused by weather and/or production practices. When grain density is lower than the accepted standard (low test weight), more volume is needed to store and transport a given weight of grain, thus increasing storage and transport costs. Different grades of each grain have different standard test weights. No. 2 yellow corn has a standard of 56 pounds per bushel while No. 3 yellow corn has a lower weight. Test weight is determined on each load of grain sold by weighing a known volume of the grain. If the weight is lower than the acceptable range, the sale is "docked" on a percentage basis. The seller of grain with test weight greater than the acceptable range is usually not rewarded for a superior product. Varieties of a crop often vary in their inherent test weight. Two common causes of low test weights are:
Grain is seldom sold at the standard moisture content (soybean = 13%, corn = 15.5%). When grain moisture content is greater than the standard, the grain weight is discounted to account for the extra moisture according to the formula: (100%- wet %) divided by (100%-dry %). For a sample of soybeans at 18 percent moisture, the calculation would be: (100-18) divided by (100-13) = 82/87 = 0.94. Multiplying the weight of the wet grain by 0.94 will give the weight of the grain at 13 percent moisture. For example: 6000 pounds of soybeans at 18% grain moisture would become 5640 pounds of grain at 13% moisture (6000 X 0.94 = 5640).
If grain is dryer than the standard, that same equation can be used to calculate the increased weight that should be credited the seller although that calculation is seldom made and the seller is not usually rewarded for the low moisture content. This calculation works for any grade of any grain for which a standard moisture content is specified.
All educational programs conducted by Ohio State University Extension are available to clientele on a nondiscriminatory basis without regard to race, color, creed, religion, sexual orientation, national origin, gender, age, disability or Vietnam-era veteran status.
Keith L. Smith, Associate Vice President for Ag. Adm. and Director, OSU Extension.
TDD No. 800-589-8292 (Ohio only) or 614-292-1868