Protect and Conserve Water

by the WBDG Sustainable Committee

Last updated: 10-14-2008

Overview

Within the federal sector, alone, it is estimated that expenditures for water and sewer run between $0.5 billion and $1 billion annually. Reducing water consumption and protecting water quality are key objectives of sustainable design. This is critical because consumption of water in many areas of the country exceeds the ability of the supplying aquifer to replenish itself. To the maximum extent feasible, federal facilities should increase their dependence on water that is collected, used, purified, and reused on-site.

The protection and conservation of water must be considered throughout the life of the building, and federal agencies must seek to:

• Reduce, control, and treat surface runoff;
• Use water efficiently through ultra-low flow fixtures, elimination of leaks, water conserving cooling towers, and other actions;
• Improve water quality; for example eliminate lead-bearing products in potable water;
• Recover non-sewage and gray water for on-site use; and
• Establish waste treatment and recycling centers; and
• Apply the FEMP Best Management Practices for Water Conservation.
• Follow Energy Independence and Security Act (EISA 2007) Hydrology requirements: maintain or restore predevelopment hydrology of the property with regard to the temperature, rate, volume and duration of flow.

Recommendations

Reduce, Control, and Treat Surface Runoff

• Use low impact development principles.
  • Use vegetated swales and depressions to reduce runoff.
  • Reduce and filter surface runoff.
  • Use pervious paving materials.
• Use Integrated Pest Management to reduce water pollution from pesticides.
• Consider incorporating green roofs into the project.
• Consider storm water events in the overall management of surface water runoff.
• Follow EPA's Green Infrastructure policy for managing stormwater.

Use Water Efficiently

• Incorporate efficiency in construction specifications.
• Use ultra water-efficient plumbing fixtures and integrate other water-saving devices into buildings.
• Design landscape for water efficiency through use of native plants tolerant of local soil and rainfall conditions.
• Meter water usage; employ measurement and verification methods; comply with the Department of Energy's International Performance Measurement and Verification Protocol (IPMVP) for water use.
• Install water-conserving cooling towers designed with delimiters to reduce drift and evaporation.
• Reduce evaporation through scheduled irrigation at dawn and dusk.
• Eliminate leaks; caulk around pipes and plumbing fixtures; conduct annual checks of hoses and pipes.
• Specify WaterSense labeled products for quality, water-efficient products.

Protect Water Quality

• Install water quality ponds or oil grit separators as storm water runoff filtration systems.
• Eliminate materials that are lead-polluting.
• Use non-toxic bathroom and kitchen cleaning products.

Recover Non-Sewage and Greywater for On-Site Use

• Use non-sewage wastewater.
• Use roof water and groundwater for on-site activities.
• Use groundwater from sump pumps.
• Work with local water jurisdiction officials to get approval for greywater projects.

Design Waste Treatment and Recycling Programs

• Use biological waste treatment systems to treat waste on-site.
• Use greywater, roof water, and groundwater for on-site activities.

Apply the FEMP Best Management Practices for Water Conservation

Best Management Practices (BMPs) were originally developed by the Department of Energy Federal Energy Management (FEMP) Program in response to the requirements set forth in previous Executive Order (EO) 13123, which required federal agencies to reduce water use through cost-effective water efficiency improvements. In response to EO 13423 and to account for recent changes in technology in water use patterns the Environmental Protection Agency's WaterSense Office has updated the original BMPs. The updated BMPs below were developed to help federal agency personnel achieve water efficiency goals of EO 13423.

BMP #1—Water Management Planning
BMP #2—Information and Education Programs
BMP #3—Distribution System Audits, Leak Detection and Repair
BMP #4—Water-Efficient Landscaping
BMP #5—Water-Efficient Irrigation
BMP #6—Toilets and Urinals
BMP #7—Faucets and Showerheads
BMP #8—Boiler/Steam Systems
BMP #9—Single-Pass Cooling Equipment
BMP #10—Cooling Tower Management
BMP #11—Commercial Kitchen Equipment
BMP #12—Laboratory/Medical Equipment
BMP #13—Other Water Use
BMP #14—Alternate Water Sources

The International Storm Water Best Management Practices (BMP) Database, developed under a grant from the U. S. Environmental Protection Agency, contains best management practices, and study references for the effective design of storm water management systems.

Related Issues

Dry Fire Hydrants

One of the synergistic technologies for achieving water conservation and fire safety is a dry fire hydrant. Dry hydrants are non-pressurized suction pipe systems that are permanently installed in ponds or lakes and use the untreated water, instead of municipal water, to fight fires. Utilized in areas that lack conventional fire protection; areas that cannot handle the large volumes of water due to antiquated systems; or during peak use seasons when there is low water pressure, dry hydrants allow fire departments to be much more efficient by providing close water sources to fire risks. Since dry hydrants are installed below frost line and do not require electricity, they are capable of supplying water in the case of natural disasters such as hurricanes and tornadoes when electricity lines are knocked down, or during extreme cold or hot weather where conventional hydrant pipes can freeze or break. Also, dry fire hydrants help to save precious drinking water and conserve energy by using rainwater that does not need to be processed to be used for fighting fires. More

Emerging Issues

Greywater use can significantly reduce the amount of potable water needed for landscaping irrigation, toilet flushing and other non-drinking water applications. To increase greywater recovery and use, coordinate with local water authorities to explain the value of greywater recovery and the benefits to them and their community.

Passive survivability is a fairly new approach to disaster recovery and continuity of operations. Ensuring the on site water storage system can survive a natural disaster would allow a facility to operate through the disaster or restart operations soon after a disaster.

Extreme weather has taxed water supply systems and caused major damage to facilities along coastlines and rivers. Before rebuilding after extreme weather events, apply sustainable development principles to rebuilding water supply systems and stormwater management.

Continual drought conditions plague some part of the country. Design water infrastructure systems and facility water use systems to minimize potable water use in these areas.

Relevant Codes and Standards

• Clean Water Act
• Energy Independence and Security Act (EISA 2007) (PDF 738 KB, 310 pgs).
• Energy Policy Act of 2005 (PDF 1.9 MB, 550 pgs)
• Executive Order 13423, "Strengthening Federal Environmental, Energy, and Transportation Management"
• Department of Defense:
• UFC 3-210-10, Low Impact Development
• UFGS 01 57 23, Temporary Storm Water Pollution
• General Services Administration:
• P100 Facilities Standards for the Public Buildings Service, 2005

Major Resources

WBDG

Building / Space Types

Applicable to most building types and space types, especially high water users such as Health Care Facilities, Hospitals, Research Facilities, Clinic / Health Unit, Laboratory: Dry, Laboratory: Wet

Design Objectives

Aesthetics—Engage the Integrated Design Process, Cost-Effective, Functional / Operational, Historic Preservation—Update Building Systems Appropriately, Productive, Secure / Safe, Sustainable—Optimize Site Potential, Sustainable—Optimize Energy Use, Sustainable—Use Environmentally Preferable Products, Sustainable—Enhance Indoor Environmental Quality, Sustainable—Optimize Operational and Maintenance Practices

Products and Systems

Building Envelope Design Guide—Sustainability of the Building Envelope
Federal Green Construction Guide for Specifiers

• 31 25 73 (02635) Stormwater Management by Compost
• 32 90 00 (02900) Planting
• 12 10 00 (12100) Art
• 22 40 00 (15400) Plumbing Fixtures

Project Management

Building Commissioning

Tools

LEED® Version 2.1 Credit / WBDG Resource Page Matrix, LEED®-DoD Antiterrorism Standards Tool

Federal Agencies

• Federal Leadership in High Performance and Sustainable Buildings Memorandum of Understanding (PDF 149 KB, 10 pgs)
• Environmental Protection Agency (EPA):
• Office of Water (OW)
• Office of Wastewater Management (OWM)
• National Pollutant Discharge Elimination System (NPDES)
• Water Use Efficiency Program

Publications

• Beneficial Landscaping Guidance (PDF 1.5 MB, 35 pgs) by the U.S. Coast Guard Environmental Management Division (G-SEC-3).
• EPA NPDES General Permit for Storm Water Discharges From Construction Activities—Fact Sheet (PDF 461 KB, 38 pgs).
• EPA Permitting Stormwater Discharges from Federal Facility Construction Projects—Fact Sheet (PDF 108 KB, 3 pgs).
• EPA Storm Water Management for Construction Activities: Developing Pollution Prevention Plans and Best Management Practices (PDF 4.2 MB, 39 pgs) by U.S. EPA. 1992.
• FEMP Product Energy Efficiency Ratings (PEER) by U.S. Department of Energy. Pages for water efficient fixtures include faucets, showerheads, urinals.
• GSA LEED® Applications Guide
• GSA LEED® Cost Study
• High Performance Building Guidelines (PDF 2.2 MB, 146 pgs), Chapter on Water Management, by New York City Department of Design and Construction. April 1999.
• Minnesota Sustainable Building Guidelines by Regents of the University of Minnesota, Twin Cities Campus, College Design, Center for Sustainable Buidling Research. Section on Water
• The Texas Manual on Rainwater Harvesting (PDF 1.9 MB, 88 pgs) by Texas Water Development Board.

Organizations

• American Rainwater Catchment Systems Association (ARCSA)
• Green Globes Rating System
• Sustainable Buildings Industry Council (SBIC)
• USACE Technical Note ERDC TN-05-DRAFT No-Water Urinals (PDF 94 KB, 2 pgs), January 2007.
• U.S. Green Building Council (USGBC):
• Leadership in Energy and Environmental Design (LEED®) Green Building Rating System

Others

• FedCenter.gov—FedCenter, the Federal Facilities Environmental Stewardship and Compliance Assistance Center, is a collaborative effort between the Office of the Federal Environmental Executive (OFEE), the U.S. Army Corps of Engineers Construction Engineering Research Laboratory, and the U.S. EPA Federal Facilities Enforcement Office. FedCenter replaces the previous FedSite as a one-stop source of environmental stewardship and compliance assistance information focused solely on the needs of federal government facilities.
• Green Seal—Standards for environmentally responsible products including water efficient fixtures
• International Stormwater Best Management Practices (BMP) Database—Developed under a grant from the U. S. Environmental Protection Agency, the BMP Database contains best management practices, and study references for the effective design of stormwater management systems.
• Low Impact Development, EPA
• Smart Communities Network—Water Efficiency, DOE
• Strategic Computing Complex (SCC)—case study on the WBDG
• Water Efficiency, Federal Energy Management Program (FEMP)
• Water Wiser—The Water Efficiency Clearinghouse