U.S. Food and Drug Administration
Center for Food Safety and Applied Nutrition
Industry Activities Section
1994
Do Your Own Establishment Inspection
A Guide to Self Inspection for the Smaller Food Processor and Warehouse
Why This Booklet?
The Food and Drug Administration (FDA) considers establishment
inspection one of its prime enforcement tools. During 1980, FDA made over
25,000 inspections of food plants and warehouses. Clearly, this is an
important way of determining whether or not food firms are in compliance
with the FDA's law and regulations. Many of the regulatory actions FDA
takes against food firms are based on FDA's findings during inspections.
Bu inspecting your own establishment, you can see if your operation
could face regulatory problems. This booklet will aid you in performing
a check of your own operations so that the FDA inspection will not
necessarily surprise you with its findings. While not a substitute for
the FDA establishment inspection, conducting your own "self inspection"
can help you to detect and solve compliance problems you might have
before they get out of hand.
This booklet tells you --
- why you should be fully aware of your firm's problem areas
- what problems you will face as you conduct your inspection
- how to make your own establishment inspection
Why You Should Be Fully Aware of Your Plant's Problem Areas
No one wants to deal with poor merchandise. If your business gets a
reputation for being shoddy, dirty or otherwise negligent, your
prospective customers will seek greener--at least, cleaner--pastures. It
makes good business sense to keep your operation healthy and reputable.
Safe, quality foods help you do this.
The food laws and regulations that FDA enforces apply to firms that
receive or ship food in interstate commerce. The requirements place the
prime legal responsibility for safe, quality foods, adequately labeled,
upon you, the food processor. If you just store foods, you too are
legally bound to prevent contamination of the food while it is in your
possession. This is the law.
- It Can Keep You Out of Trouble
The FDA does enforce the law. If your facilities are found to be
out of compliance with the Federal requirements for proper food
processing and warehouse storage practices, you can face any number of
Federal actions. These include:
Notice of Adverse Findings Letter: Issuance of this official
correspondence, while not considered a regulatory action, indicates
FDA's awareness of a violation that must be corrected.
Regulatory Letter: A formal notification that the FDA is prepared
to take a legal action if the violations cited in the letter are not
corrected immediately.
Seizure: This is a civil court action against a specific lot of
goods to remove them from the channels of commerce. Seizure actions are
concerned primarily with the confiscation of food products which are
in violation of the law and with the condemnation and destruction or
reconditioning of these products.
Prosecution: Criminal action taken against a firm responsible
for causing the charged violations of law. A first offense can draw one
year in prison, $1,000 fine, or both, on each count or proven violation.
A second offense can mean a sentence of three years in prison and $10,000
for each count. A first offense with intent to defraud or mislead is
subject to imprisonment for not more than three years, or a fine of
$10,000, or both for each offense.
Injunction: A decree that restrains the defendants from engaging
in violative food processing or warehouse practices and remains in force
until termination. This would occur if the firm has a history of
insanitary problems or when there is a health hazard involved with the
operation.
In terms of cost and manpower, self inspection is the most resonable
means of helping to ensure a satisfactory food processing and storage
operation, and a "clean bill of health" from the FDA. By taking
the time and effort to inspect your operations on a regular basis, you
have the opportunity to correct potential problems and safeguard your
investment.
The Problem Areas: What You Are Up Against
There are seven problem areas that, if left unwatched and unchecked, can
become severe hindrances in your efforts to maintain a sanitary food
operation free of compliance problems.
First is the rodent (usually, rats and mice). Rodents carry many diseases
and parasites which, because of their biological similarity to people,
can be transmitted to man. These diseases and parasites include
leptospirosis (Weil's Disease), salmonellosis, tapeworms, trichinosis and
others.
Rodents will deposit excreta, urine and other filth on food products and
around your facilities. They will also gnaw on materials in order to
build nests. Rodents contaminate much more than they eat.
Against rodents, you cannot take the security of your plant or firm for
granted. Some rodents can walk along telephone wires or leap
horizontally
18 feet. They can squeeze through gaps the width of a pencil or drop 50
feet without being killed. Their instinct for survival is high, and they
can deviate from "normal" behavior patterns to trick man. They are
extremely prolific creatures, and once they've infiltrated your
operations, your problems will multiply!
Birds also carry diseases and parasites potentially hazardous to people.
They are capable of flying through any open window, door or other gaps
in your building, and, like rodents, will leave insanitary droppings
that can contaminate your plant and your food products.
Insects seek heat, moisture and darkness, and once in, can be even
more elusive than rodents or birds. However, they aren't invisible--they
leave trails in the dust, and can also be spotted around likely insect
hideouts: holes, damp places, behind boxes and in seams in bags and folds
of paper. Like rodents, some insects--notably cockroaches--have a highly
developed survival instinct and they are adaptable--they can develop
an immunity to poisons you use within a few insect generations. They are
even more prolific than rodents. With their hairy legs, they spread dirt,
debris and bacteria around your firm. They carry either within or outside
of their bodies the causes for many serious diseases and ailments such as
boils, food poisoning and typhoid fever.
In dealing with any of the above pest problems, you may want to try to
cope with them on your own, but it is highly recommended that you seek
the help of a good pest control operator, or "exterminator." The results
will probably be better, and in the long run, this may be a more cost
effective method.
If you were to take all the rodents and insects in the world, they would
be outnumbered by the bacteria to be found in one vat of spoiled
egg batter. Bacteria are a worse problem than any of the previously
mentioned creatures because they can't be seen, yet they can sicken or
kill just the same.
Bacteria cannot be eliminated, but they can be defeated. Like any
creatures, bacteria need a combination of food, water and the proper
temperature to survive. By regulating the availability of each, you can
take a big step toward keeping their population down.
Molds will grow on almost anything, especially where there is
moisture. The presence of mold in a product is an indication that the
product contains excessive decomposed material and may also indicate
insanitary practices on the part of the processor. Molds can make you
ill, and scraping off mold or getting rid of the one "bad apple" doesn't
always solve the problem.
While the other problem areas are active, aggressive opponents,
chemical contaminants can only become a problem through misuse
or neglect--yet the end result of their presence can be equally
disastrous. Still, this is one of the easier problems to control.
This brings us to the seventh problem area--ignorance and carelessness.
As a problem, this can be just as dangerous as any of the preceeding,
but it can combatted by applying the guidelines given in this booklet,
and by just using common sense. Now, let's get on with the tactics for
waging an offensive against the problems.
Police the Area--Know What's in Your Plant
Self-inspection is a most cost effective way for you to maintain a
firm that is in compliance with federal requirements for food processing
and storage. By assuming the role of an investigator, you can uncover
potential problems and solve them before they become big
problems.
Let's "walk" through an operation--your operation--using the following
checklist to investigate major areas of concern. This checklist can serve
as a basic guide to help you maintain or improve compliance with federal
requirements and to ensure that only safe, quality products reach the
consumers.
Here are some pointers for using the checklist:
- Check the box beside each item to indicate a "situation under
control," or one that needs further attention.
- Use the space provided at the end of each topic section to note
what you intend to do to correct an identified problem, and to note any
compliance problems you face that are not addressed by the checklist.
This checklist is a guide to be developed according to the needs
of your operation.
- Feel free to photocopy this checklist and to use it regularly during
your inspections.
Employees |
|
We'll begin the check with your employees. They are your most important
resource. | |
OK |
| Needs Attention |
|
Are the employees well-trained in what they do? You can avoid
many problems by making sure that your employees clearly understand
their functions. |
|
|
In handling food products, do your employees wear the proper
hair covering and clean uniforms? |
|
|
Are your employees wearing jewelry, bandages, or have any
illnesses, infections or injuries (i.e., boils, cuts) which can
contaminate foods? |
|
|
Do your employees wash after each visit to the toilet?
- Do you have washing facilities available for your employees
near their work stations, and do they use them when their hands become
soiled or contaminated?
- You must display "reminder" posters in your rest rooms for employees
to wash their hands.
|
|
|
Do your employees maintain clean personal habits? They should
keep their hands away from body surfaces, which are loaded with
bacteria. |
|
|
Is the traffic within your plant controlled to prevent
contamination of the processing areas? |
|
|
Have your employees been told the reasons why they should
undertake the above precautions? |
|
|
Other Employee practices that need attention: |
|
|
|
|
|
Plant/Grounds |
OK |
| Needs Attention |
|
Is the area around your firm clear of weeds, grass and brush?
This sort of foliage can be an effective cover for pests to infiltrate
your firm.
|
|
|
Is there any standing water on your ground which also attracts
pests? |
|
|
Other outside Plant conditions that I want to look into:
| |
|
|
|
|
Building/Facility
|
OK |
| Needs Attention |
|
Do windows and doors seal tightly to ward off pests and
contaminants? |
|
|
Do windows have fine mesh screens to keep out insects? |
|
|
Will a pencil pass under the door? That's all the space required
for a rodent to enter. |
|
|
Have all holes and cracks been filled so as not to provide
hiding places or entry points for pests? |
|
|
Not only should your firm be free of vermin and pests--there
shouldn't even be evidence of the presence of domestic animals such as
cats and dogs. |
|
|
Are rest rooms cleaned regularly? |
|
|
Are the hand-washing facilities furnished with paper or air
hand dryers and soap?
- The hand-washing facilities should be furnished with running
water at a suitable temperature for washing hands.
- They should provide effective hand-washing and sanitizing
preparations.
|
|
|
Does the roof leak? This can add to the problems of humidity,
standing water and product contamination. |
|
|
Are the overhead lights covered with shields to prevent
contamination of products by broken glass in case the lamps burst? |
|
|
Other Building/Facility problems that need to be
addressed: |
|
|
|
|
|
Equipment
|
OK |
| Needs Attention |
|
Is all equipment which comes in contact with food cleaned and
sanitized as often as necessary to prevent contamination of the product?
You should follow appropriate cleaning schedules for each piece of
equipment. |
|
|
Is the equipment designed, or otherwise suitable, for use in a
food plant? For example, equipment for handling or processing foods
cannot contain polychlorinated biphenyls (PCB's), which are very toxic
(this does not apply to electrical transformers and condensers
containing PCB's in sealed containers). |
|
|
Is there a build-up of food or other static material on the
equipment? This can serve as a breeding place for insects and bacteria.
|
|
|
Is there any build-up or seepage of cleaning solvents or
lubricants on your equipment which can contaminate foods? All repairs on
equipment should be of a permanent nature (e.g., no bobby pins in place
of cotter pins), as temporary repair parts can break or rupture and get
in the food product. |
|
|
Is the equipment hard to disassemble for clean-up and
inspection? The more difficult it is, the less inclined you or an
employee will be to clean it. |
|
|
Is there a lot of "dead space" in or around the machinery where
food and other debris can collect as a nest for insects and bacteria?
|
|
|
Can the surface of the equipment be sanitized? Wood is one
material that cannot. |
|
|
Other Equipment cleaning and maintenance issues that should be
covered: |
|
|
|
|
|
Housekeeping
|
OK |
| Needs Attention |
|
Are trash, debris, and clutter picked up so as not to provide
hiding places for pests? |
|
|
Do employees eat and smoke only in designated areas? |
|
|
Is the food spilled or uneaten by employees cleaned up quickly
so as not to attract pests or breed bacteria? |
|
|
Has old rodent excreta been cleaned up so you can spot any new
activity? |
|
|
Additional Housekeeping duties that must be attended to:
|
|
|
|
|
|
Garbage
|
OK |
| Needs Attention |
|
Is garbage quickly removed and dumped in appropriate bins? It
should not sit around your facilities to attract pests. |
|
|
Is the garbage kept covered? An open garbage pile is an excellent
breeding ground for insects and rodents. |
|
|
Other Garbage-handling problems that should be explored:
|
|
|
|
|
|
Plumbing
|
OK |
| Needs Attention |
|
Is the water used in your firm from an approved source (either
municipal supply or tested private source)? |
|
|
Have you made sure there are no hoses left dangling in sinks or
on the ground? Loss of pressure can cause a back flow that will
contaminate your water supply. |
|
|
Do your facilities have back flow and vacuum breaker valves
to prevent contaminate your water supply? |
|
|
Avoid standing water around your firm. |
|
|
Other Plumbing needs that require attention:
| |
|
|
|
|
Humidity |
OK |
| Needs Attention |
|
Does your building have dripping condensation or leaky
plumbing which can contaminate foods? |
|
|
Are you keeping the humidity in your operation low?
Molds, insects and bacteria thrive in damp climate. |
|
|
Other problems to attend to regarding Humidity:
| |
|
|
|
|
Temperature
|
OK |
| Needs Attention |
|
Are storage areas intended for room temperature subject to
extremes of temperature, either hot or cold? This can damage foods.
- For refrigeration storage, coolers should be kept at or below
40 degrees F.
- For freezer storage, the temperature should be kept at or below 0
degrees F.
|
|
|
Are you keeping a record of temperatures for all storage areas on
a regular basis? |
|
|
Are you keeping your facilities at the proper temperature
range? Insects love high temperatures, and their activity will pick up
as the temperature goes up. |
|
|
Additional Temperature-related difficulties to
explore:
|
|
|
|
Incoming Raw
Materials |
OK |
| Needs Attention |
|
Have you checked to see that the compartment door seals on
the truck are intact? |
|
|
Is there a clean smell when the compartment doors are opened,
or are there signs of contamination such as petroleum distillate,
putrefaction, or other off-odors? |
|
|
Is any refrigerated compartment set at the proper temperature?
|
|
|
Are boxes properly stacked and intact? |
|
|
Is there evidence of activity by insects, rodents or birds? |
|
|
Is there evidence of the misuse of pesticides such as DDT
tracking powder, 1080, or insect sprays? |
|
|
Additional problems that should be dealt with on Incoming
Raw Materials: |
|
|
|
|
|
The FDA publication Inspecting Incoming Food Materials
will provide further information on
conducting an inspection of incoming food materials.
| |
|
Storage
of Raw Materials and Products
|
OK |
| Needs Attention |
|
Is the storage area over-crowded? Such a condition prevents
adequate inspection and clean-up and also increases the likelihood of
damage to products during handling. |
|
|
Are products stored on pallets and at least 18 inches away from
the walls? It is important to leave space for inspection aisles so that
rodent and insect activity can be seen more readily. You might consider
painting a white line on the floor along the walls to indicate inspection
aisles. |
|
|
Other Storage problems that should be corrected: |
|
|
|
|
|
Rotation
|
OK |
| Needs Attention |
|
Are products stored on a first-in, first-out basis to reduce the
possibility of contamination through spoilage?
- Are old products kept in front of the new to help in the
rotation process?
|
|
|
Are all incoming products dated to ensure a proper rotation of
stocks? |
|
|
Are items overstocked? This increases the chances of spoilage and
contamination. |
|
|
When checking containers for contamination, are dusty, faded or
discolored containers checked first? They are obviously the most suspect
items. |
|
|
Additional issues to address on the Rotation process:
|
|
|
|
|
|
Quarantine
|
OK |
| Needs Attention |
|
Are all products spoiled by damage, insects, rodents or other
causes stored in a designated "Quarantine Area" to prevent their contact
with safe products? |
|
|
Are such quarantined items disposed of quickly to prevent the
development of pest breeding places? |
|
|
Are incoming materials inspected for damage or contamination
so that they can be rejected? |
|
|
Other problems to address in the Quarantine procedure:
|
|
|
|
|
|
Pest Control
|
OK |
| Needs Attention |
| If you hire an outside pest control operator.
you should: | |
|
Check regularly on what the pest control operator is doing. Don't
accept what he's doing on faith. |
|
|
Check to see what poisons he is using. Make sure the poisons do
not contaminate foods. |
|
|
Learn where and how many bait stations there are.
- They should be placed so as not to present any chance of food
contamination.
- They should be checked regularly.
|
|
|
Check to see if fumigators are being used. Do they represent
a hazard to employees or food safety?
If doing your own exterminating, you should: |
|
|
Know there is no such thing as an all-purpose pesticide,
especially where foods are concerned. Get qualified advice before using
any poisons. |
|
|
Make a map showing locations of all traps, bait stations, etc.,
and check them regularly. |
|
|
Put money into building maintenance if that will help solve your
pest problems. For instance, don't rely solely on rodenticides to control
your pest problem and leave gaps in the doors for the rodents to enter.
Make sure those gaps are sealed. Extermination is a poor second choice,
and will cost you as much, or more, in the long run. |
|
|
Other Pest Control situations to explore: |
|
|
|
|
|
Storage and Handling of Hazardous
Materials |
OK |
| Needs Attention |
|
Are materials such as pesticides, herbicides, cleaning solvents,
lubricants and boiler compounds accessible for use only by authorized
employees? This will help prevent accidents such as food contamination
and employee injuries due to ignorance and misuse. |
|
|
Additional situations to consider regarding Hazardous
Material Storage: |
|
|
|
|
|
Labeling |
OK |
| Needs Attention |
|
Are all hazardous materials kept in bottles, or drums, or
boxes that reflect their dangerous nature? |
|
|
Even non-hazardous materials should be labeled correctly.
Several babies died in a hospital because salt was mistakenly used for
sugar in their formulae. |
|
|
Make sure that any labels you market comply with the Food, Drug,
and Cosmetic Act and Fair Packaging and Labeling Act. |
|
|
Other questions on Labeling that need to be considered:
|
|
|
|
|
|
FDA does not have the authority to approve labels prior to marketing,
but it does have jurisdiction once the label is in interstate
commerce. FDA will take legal action if a product is not labeled in
accordance with the law. FDA is willing to provide comments on your
labeling prior to marketing, if you desire. |
|
|
Food Additives
|
OK |
| Needs Attention |
|
Make certain that the food additives you use are suitable and
safe for the intended purposes. |
|
|
Other issues regarding Food Additives to be resolved:
|
|
|
|
|
|
Product Codes
|
OK |
| Needs Attention |
|
Do you have an effective recall procedure set up? |
|
|
Other considerations on Product Codes: |
|
|
|
|
|
By completing this brief inspection "patrol," you now have an idea
of what the FDA investigator will generally look for when he visits
your firm. This "short course" is far from complete, but it should
provide a foundation to help you maintain a safe, quality food
processing and storage operation.
Here are some last-minute hints to help you in your inspection and
sanitation efforts:
- As you inspect, use the checklist to make a record of the problems
you encounter so you won't forget them. You can then make corrections
based on the checklist.
- Formulate inspection, clean-up and maintenance schedules and stick
to them.
- Define your employees' responsibilities; make sure each one
understands his duties so that no essential details are ignored.
- Be diligent in your sanitation efforts. The struggle to control
pests, bacteria and the other problem areas is a fulltime effort.
You've just taken your first big step in the campaign for better
food processing and storage. By reading this booklet, you've gained an
awareness of the problems you might face, tactics for dealing with them,
and knowledge that FDA is ready to help you with advice and further
information on how you can deal with specific problems you encounter.
By taking preventive measures now, you can avoid potentially costly,
mandated adjustments that might arise when the FDA investigator pays you
a visit--and you can ensure that only quality, safe food products find
their way to the consumers...a move we all want.
Hypertext updated by j3b/ear/dms 1997-NOV-10