OSHA Construction Resource Manual
Table of Contents
Foreword
PART 1903 - INSPECTIONS, CITATIONS AND PROPOSED PENALTIES
Sec
| 1903.2 |
Posting of notice; availability of the Act, regulations and applicable standards |
| 1903.3 |
Authority for inspection |
| 1903.7 |
Conduct of inspections |
| 1903.8 |
Representatives of employers and employees |
| 1903.14 |
Citations; notices of de minimis violations; policy regarding employee rescue activities |
PART 1904 - RECORDING AND REPORTING OCCUPATIONAL INJURIES AND ILLNESSES
Sec
| 1904.1 |
Purpose and scope |
| 1904.2 |
Log and summary of occupational injuries and illnesses |
| 1904.3 |
Period covered |
| 1904.4 |
Supplementary record |
| 1904.5 |
Annual summary |
| 1904.6 |
Retention of records |
| 1904.7 |
Access to records |
| 1904.8 |
Reporting of fatality or multiple hospitalization incidents |
| 1904.9 |
Falsification, or failure to keep records or reports |
| 1904.10 |
Recordkeeping under approved State plans |
| 1904.11 |
Change of ownership |
| 1904.12 |
Definitions |
| 1904.13 |
Petitions for recordkeeping exceptions |
| 1904.14 |
Employees not in fixed establishments |
| 1904.15 |
Small employers |
| 1904.16 |
Establishments Classified in Standard Industrial Classification Codes (SIC) 52-89, (except 52-54, 70, 75, 76, 79 and 80) |
PART 1910 - GENERAL INDUSTRY
PART 1926 - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
Subpart A - General
Sec
| 1926.1 |
Purpose and scope |
| 1926.2 |
Variances from safety and health standards |
| 1926.3 |
Inspections - right of entry |
| 1926.4 |
Rules of practice for administrative adjudications for enforcement of safety and health standards |
| 1926.5 |
OMB control numbers under the Paperwork Reduction Act |
Subpart B - General Interpretations
| 1926.10 |
Scope of subpart |
| 1926.11 |
Coverage under section 103 of the act distinguished |
| 1926.12 |
Reorganization Plan No 14 of 1950 |
| 1926.13 |
Interpretation of statutory terms |
| 1926.14 |
Federal contracts for "mixed" types of performance |
| 1926.15 |
Relationship to the Service Contract Act; Walsh-Healey Public Contracts Act |
| 1926.16 |
Rules of construction |
Subpart C - General Safety and Health Provisions
Subpart D - Occupational Health and Environmental Controls
| |
Overview for Subpart D |
| 1926.50 |
Medical services and first aid |
| 1926.51 |
Sanitation |
| 1926.52 |
Occupational noise exposure |
| 1926.53 |
Ionizing radiation |
| 1926.54 |
Nonionizing radiation |
| 1926.55 |
Gases, vapors, fumes, dusts, and mists |
| 1926.56 |
Illumination |
| 1926.57 |
Ventilation |
| 1926.58 |
[Reserved] |
| 1926.59 |
Hazard communication |
| 1926.60 |
Methylenedianiline |
| 1926.61 |
Retention of DOT markings, placards and labels |
| 1926.62 |
Lead |
| 1926.63 |
Cadmium (This standard has been redesignated as 1926.1127) |
| 1926.64 |
Process safety management of highly hazardous chemicals |
| 1926.65 |
Hazardous waste operations and emergency response |
| 1926.66 |
Criteria for design and construction for spray booths |
| |
Compliance Guidance for Subpart D |
| CPL 2-2.53 |
Guidelines for First Aid Training Programs |
| STD 1-8.2 |
29 CFR 1910.151(c) Medical Service and First Aid; 29 CFR 1926.50 and .51, Medical Service and First Aid, and Sanitation, Respectively, Applicable to Electric Storage Battery Charging and Maintenance Areas |
| Interpretation |
29 CFR 1926.50 -- Medical Services and First Aid |
| Interpretation |
29 CFR 1926.54 -- Nonionizing Radiation |
Subpart E - Personal Protective and Life Saving Equipment
Subpart F - Fire Protection and Prevention
Subpart G - Signs, Signals, and Barricades
Subpart H - Materials Handling, Storage, Use, and Disposal
| 1926.250 |
General requirements for storage |
| 1926.251 |
Rigging equipment for material handling |
| 1926.252 |
Disposal of waste materials |
Subpart I - Tools - Hand and Power
| 1926.300 |
General requirements |
| 1926.301 |
Hand tools |
| 1926.302 |
Power operated hand tools |
| 1926.303 |
Abrasive wheels and tools |
| 1926.304 |
Woodworking tools |
| 1926.305 |
Jacks - lever and ratchet, screw and hydraulic |
| 1926.306 |
Air Receivers |
| 1926.307 |
Mechanical power-transmission apparatus |
| |
Compliance Guidance for Subpart I |
| STD 1-12.26A |
Abrasive Operations Using Cutoff Wheels and Masonry Saws |
| STD 1-13.4 |
Portable Belt Sanding Machines as Covered by 29 CFR 1910.243(a)(3) and 1926.304(f) |
Subpart J - Welding and Cutting
| |
Overview for Subpart J |
| 1926.350 |
Gas welding and cutting |
| 1926.351 |
Arc welding and cutting |
| 1926.352 |
Fire prevention |
| 1926.353 |
Ventilation and protection in welding, cutting, and heating |
| 1926.354 |
Welding, cutting and heating in way of preservative coatings |
| |
Compliance Guidance for Subpart J |
| STD 3-8.1 |
Welding, Cutting or Heating of Metals Coated with Lead-Bearing Paint |
| STD 3-8.2 |
29 CFR 1926.350(a)(9) Securing of Compressed Gas Cylinders |
Subpart K - Electrical
General
Installation Safety Requirements
Safety-Related Work Practices
Safety-Related Maintenance and Environmental Considerations
Safety Requirements for Special Equipment
Definitions
| 1926.449 |
Definitions applicable to this subpart |
Subpart L - Scaffolds
| 1926.450 |
Scope, application and definitions applicable to this subpart |
| 1926.451 |
General requirments |
| 1926.452 |
Additional requirements applicable to specific types of scaffolds |
| 1926.453 |
Aerial lifts |
| 1926.454 |
Training |
APPENDIX A TO SUBPART L - SCAFFOLD SPECIFICATIONS
APPENDIX B TO SUBPART L - CRITERIA FOR DETERMINING THE FEASIBILITY OF PROVIDING SAFE ACCESS AND FALL PROTECTION FOR SCAFFOLD ERECTORS AND DISMANTLERS
APPENDIX C TO SUBPART L - LIST OF NATIONAL CENSENSUS STANDARDS
APPENDIX D TO SUBPART L - LIST OF TRAINING TOPICS FOR SCAFFOLD ERECTORS AND DISMANTLERS
APPENDIX E TO SUBPART L - DRAWINGS AND ILLUSTRATIONS
| |
Compliance Guidance for Subpart L |
| STD 3-10.2 |
29 CFR 1926.451(i)(8), Multistage Suspension Scaffolds |
| STD 3-10.3 |
29 CFR 1926.451(a)(5 Scaffolding, General Requirements Guardrails |
| STD 3-10.4 |
29 CFR 1926.451, Scaffolding |
Subpart M - Fall Protection
APPENDIX A TO SUBPART M - DETERMINING ROOF WIDTHS
APPENDIX B TO SUBPART M - GUARDRAIL SYSTEMS
APPENDIX C TO SUBPART M - PERSONAL FALL ARREST SYSTEMS
APPENDIX D TO SUBPART M - POSITIONING DEVICE SYSTEMS
APPENDIX E TO SUBPART M - SAMPLE FALL PROTECTION PLANS
| |
Compliance Guidance for Subpart M |
| STD 3-0.1A |
Interim Fall Protestion Compliance Guidelines for Residential Construction |
| Interpretation |
29 CFR 1926.500-503 -- Interpretations and Clarifications Subpart M -- Fall Protection M-57 |
| Memo |
Fall Protection Plans -- Enforcement Policy |
| |
Final Rule |
Subpart N - Cranes, Derricks, Hoists, Elevators, and Conveyors
| 1926.550 |
Cranes and derricks |
| 1926.551 |
Helicopters |
| 1926.552 |
Material hoists, personnel hoists and elevators |
| 1926.553 |
Base-mounted drum hoists |
| 1926.554 |
Overhead hoists |
| 1926.555 |
Conveyors |
| *1926.556 |
[Removed] |
| |
Compliance Guidance for Subpart N |
| STD 3-12.1A |
29 CFR 1926.550(a)(15)(i) Clearance Between Electrical Power Lines and Cranes |
| STD 3-12.2 |
Uniformity in Interpretation of 29 CFR 1926.550(a)(9) |
| STD 3-12.4 |
Overhead and Gantry Cranes, and Derricks -- Normal Operating Conditions, CFR 1910.179(e)(6)(i), CFR 1910.179(g)(2)(i), and CFR 1910.181(j)(1)(i); CFR 1926.550(d)(4) and CFR 1926.550(e) |
Subpart O - Motor Vehicles, Mechanized Equipment, and Marine Operations
Subpart P - Excavations
APPENDIX A TO SUBPART P - SOIL CLASSIFICATION
APPENDIX B TO SUBPART P - SLOPING AND BENCHING
APPENDIX C TO SUBPART P - TIMBER SHORING FOR TRENCHES
APPENDIX D TO SUBPART P - ALUMINUM HYDRAULIC SHORING FOR TRENCHES
APPENDIX E TO SUBPART P - ALTERNATIVES TO TIMBER SHORING
APPENDIX F TO SUBPART P - SELECTION OF PROTECTIVE SYSTEMS
| |
Compliance Guidance for Subpart P |
| Memo |
Suspension of 29 CFR 1926.652 to House Foundation/Basement Excavations |
Subpart Q - Concrete and Masonry
Construction
| 1926.700 |
Scope, application, and definitions, applicable to this subpart |
| 1926.701 |
General requirements |
| 1926.702 |
Requirements for equipment and tools |
| 1926.703 |
Requirements for cast-in-place concrete |
| 1926.704 |
Requirements for precast concrete |
| 1926.705 |
Requirements for lift-slab construction operations |
| 1926.706 |
Requirements of masonry construction |
APPENDIX TO SUBPART Q - References to Subpart Q of Part 1926
| |
Compliance Guidance for Subpart Q |
| STD 3-15.3 |
29 CFR 1926.705, Requirements for Lift-Slab Construction Operations -- Inspection Procedures and Guidelines |
Subpart R - Steel Erection
| 1926.750 |
Flooring requirements |
| 1926.751 |
Structural steel assembly |
| 1926.752 |
Bolting, riveting, fitting-up, and plumbing-up |
| 1926.753 |
Safety Nets |
| |
Compliance Guidance for Subpart R |
| STD 3-6.1 |
1926.250(b)(1), Material Storage -- As Related to Interium Storage of Temporary Flooring Used in Steel Erection |
| Memo |
Fall Protection in Steel Erection |
Subpart S - Tunnels and Shafts, Caissons, Cofferdams, and Compressed Air
APPENDIX A TO SUBPART S - DECOMPRESSION TABLES
Subpart T - Demolition
Subpart U - Blasting and Use of Explosives
Subpart V - Power Transmission and Distribution
Subpart W - Rollover Protective Structures; Overhead Protection
| 1926.1000 |
Rollover protective structures (ROPS) for material handling equipment |
| 1926.1001 |
Minimum performance criteria for rollover protective structures for designated scrapers, loaders, dozers, graders, and crawler tractors |
| 1926.1002 |
Protective frames (roll-over protective structures, known as ROPS) for wheel-type agricultural and industrial tractors used in construction |
| 1926.1003 |
Overhead protection for operators of agricultural and industrial tractors |
Subpart X - Stairways and Ladders
APPENDIX A TO SUBPART X - Ladders
Subpart Y - Commercial Diving Operations
General
Personnel Requirements
General Operations Procedures
Specific Operations Procedures
Equipment Procedures and Requirements
Recordkeeping
APPENDIX A TO SUBPART Y - Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
APPENDIX B TO SUBPART Y - Guidelines for Scientific Diving
Subpart Z - Toxic and Hazardous Substances
APPENDIX A TO PART 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards
|
Back to Top
