|
|
|
|
 |
|
|
Respirator Change Schedules |
|
|
|
|
Respirator cartridges don't last forever! |
|
|
|
|
|
|
|
|
A change schedule is the
part of the written respirator program which says how often cartridges should be replaced
and what information was relied upon to make this judgment. A cartridge's useful
service life is how long it provides adequate protection from harmful chemicals in the
air. The service life of a cartridge depends upon many factors, including environmental conditions, breathing
rate, cartridge filtering capacity, and the amount of
contaminants in the air. It is suggested that employers apply a safety factor
to the service life estimate to assure that the change schedule is a
conservative estimate.
If you know what the chemical is and how much of it you are exposed to, then you are ready
to estimate out how long your respirator cartridges will work and apply the safety
factor.
|
|
|
|
| 3 |
valid ways for you to estimate a cartridge's service life: |
|
1. Conduct Experimental Tests
 |
Can save money by providing a more
accurate service life value instead of relying on conservative assumptions made by other methods |
| |
|
|
|
Most reliable method, especially for multiple contaminants |
| |
|
|
|
Can be used to validate an existing change schedule |
| |
|
 |
Will likely take time and money to perform the tests |
|
2. Use the Manufacturer's Recommendation
|
|
Can result in a more accurate estimate for your particular brand of
respirator |
| |
|
|
|
Relies on the manufacturer's broad knowledge and expertise |
| |
|
|
|
May not be possible if the manufacturer is unable to provide a
recommendation |
| |
|
|
|
May not account for all workplace and user factors adequately |
|
3. Use a Math Model
|
|
Inexpensive and takes little time |
| |
|
|
|
Requires no math calculations if you use the Advisor Genius |
| |
|
|
|
Not as accurate as experimental testing. May result in a service life
estimate that is shorter than it needs to be due to conservative assumptions |
| |
|
|
|
Generally limited to single contaminant situations |
|
|
|
|
|
Keep In Mind |
|
|
- You may not rely on odor thresholds and other warning properties as the primary basis for determining
the service life of gas and vapor cartridges and canisters.
- You should account for
environmental and user factors and use a conservative approach when evaluating service
life testing data.
- You should apply a safety factor to any estimate to account for uncertainty.
- Mixtures, intermittent use and
concentrations, storage practices and other variables may require the use of an
administrative time limit, e.g. one day, even though the estimated life would be longer.
- An example of a decision logic tree which could be used when evaluating a workplace
for use of air purifying respirators is presented in these pages.
- There is a published "Rule of Thumb" that may provide a
rough estimation of cartridge service life. However, you should NOT use this as the sole method of determining service life.
|
|
|
|
Return to Respiratory eTool
Homepage |
|
|
|
|
|
Back to Top
www.osha.gov
