Reviewed October 1993
Use our feedback form for questions or comments about WM4.
Contents
Publication search
Waste reduction makes good management sense. Where there is waste, there is inefficiency, and where there is inefficiency, there is an opportunity to reduce costs. Reducing waste increases productivity, safeguards the environment and strengthens the firm's economic base. Waste reduction is a demonstration of the firm's commitment to environmental protection.
Many firms have developed and implemented waste reduction and recycling as a normal way of doing business, and the returns have been favorable. This process is best initiated by conducting a waste audit.
Twenty years ago, waste minimization meant "minimum cost disposal." Industrial waste was contained, treated (if necessary) and disposed. Generally, the only waste management information a firm received was from the individual who hauled their waste. This information seldom included waste reduction practices and was often self-serving to the hauler.
Today, this approach to waste management is not only impractical, but is unacceptable in terms of efficiency and the firm's social responsibilities.
Manufacturing processes are shifting from product optimization to system optimization in order not to make waste from the onset. Waste reduction pays long-term dividends and should be viewed as making an investment in a clean, safe environment -- a social responsibility.
This publication explains the current waste minimization requirements, gives you a strategy for waste management, and tells you how to prepare for and perform a waste reduction audit.
Statutory requirements relating to waste minimization are part of the 1984 Hazardous and Solid Waste Amendments (HSWA).
Section 3002 (a) (6) of HSWA requires that all generators describe "the efforts undertaken during the year to reduce the volume and toxicity of waste generated" as well as "changes in volume and toxicity of waste actually achieved during the year in question in comparison with previous years, to the extent such information is available for years to enactment of (HSWA)." This report applies to EPA-classed large quantity generators.
Section 3002 (b) requires generator certification for waste manifest (mandated under Section 3002 (a)) programs "to reduce the volume or quantity and toxicity of such waste to the degree determined by the generator to be economically practicable."
Finally, Section 3005 (h) requires the same certification for any new permit issued for the treatment, storage or disposal of hazardous waste.
Additionally, the 1990 Omnibus Solid Waste Management Law states landfill waste must be reduced by 40 percent by 1998, requiring county and city governments to devise plans to achieve this goal.
The waste audit is an integrated approach involving:
The waste audit is an in-plant analysis of each operation generating waste. This requires considering the following for each process:
Within every industrial facility, there are a number of distinct operations which, when combined in the proper sequence, lead to the production of a product. The process engineer refers to these as unit processes. To properly begin a waste reduction audit, it is necessary to list all the unit processes and assemble as much information as possible. This information should include:
Operational type categories
Process categories
Include all intermittent processes, such as cleaning, make-up, blow-down and tank dumping, in the inventory process.
To be effective, the audit must be conducted methodically and thoroughly under the direction of experienced individuals who understand the firm's processes and operations. It is necessary to record all data and information to ensure no operation is missed.
There are several Audit Handbooks available that provide the procedure and forms for recording information. Significant imbalances may occur due to measurement and estimation. Additionally, various inputs and losses, i.e. evaporation, may have been understated or missed altogether. Therefore, the compilation of accurate, comprehensive data is essential to a successful waste reduction audit. A preliminary material balance must be made to determine if the information has gaps or inaccuracies.
The opportunities to reduce waste are many, and they all cannot be accomplished and implemented at once.
Evaluate all the options and implement the one with the greatest potential first. The following criteria can help determine options with the greatest potential:
Management must realize a waste reduction audit is not a one-time affair, but must be done on a regular basis. Documentation that is prepared during the waste reduction audit process can serve as the basis for the next audit.
The following material provides more in-depth information on industrial waste audits.
WM4, reviewed October 1993