Research & Development Treesearch

All Publications For: FPL Publications

1. Hardwoods for timber bridges (2005)
2. Properties of red maple laminated veneer lumber (2005)
3. Engineered trusses from undervalued hardwoods (2005)
4. Drying and heat sterilization of maple lumber for structural uses (2005)
5. Sorting red maple logs for structural quality (2005)
6. Basic properties of undervalued hardwoods (2005)
7. Minimizing corrosive action in timber bridges treated with waterborne preservatives (2007)
8. Designing timber highway bridge superstructures using AASHTO–LRFD specifications (2007)
9. Woody biomass supply from thinnings to reduce fire hazard in the U.S. West and its potential impact on regional wood markets (2008)
10. Occurrence of taxol and related taxanes in the wood of Pacific yew (1993)
11. A percolation model for electrical conduction in wood with implications for wood-water relations (2008)
12. Minor shake up : markets were soft, but the big mills still packed some production punch (2007)
13. Corrosion avoidance with new wood preservatives (2007)
14. Rate of convergence of k-step Newton estimators to efficient likelihood estimators (2007)
15. Woods from the Miocene Bakate Formation, Ethiopia : anatomical characteristics, estimates of original specific gravity and ecological inferences (2007)
16. Prediction of the elastic modulus of wood flour/kenaf fibre/polypropylene hybrid composites (2007)
17. The role of moisture content in above-ground leaching (2007)
18. Red maple lumber resources for glued-laminated timber beams (2005)
19. Estimating preservative release from treated wood exposed to precipitation (2008)
20. In-situ Raman microprobe studies of plant cell walls: macromolecular organization and compositional variability in the secondary wall of Picea mariana (Mill.) B.S.P. (1986)
21. Small world, big results : nanotechnology and forest products are teaming up to create the “material of the 21st century”-–coated paper and paperboard (2007)
22. Genome sequence of the lignocellulose-bioconverting and xylose-fermenting yeast Pichia stipitis (2007)
23. Hymenochaetales: a molecular phylogeny for the hymenochaetoid clade (2006)
24. Assessment of in-place wood floor systems (2007)
25. Determination of ethylenic residues in wood and TMP of spruce by FT-Raman spectroscopy (2008)
26. If the U.S. had Canada's stumpage system (2006)
27. Biological degradation of wood-plastic composites (WPC) and strategies for improving the resistance of WPC against biological decay (2008)
28. Bioeconomic and market models (2006)
29. Polylactide-pine woodflour composites (2007)
30. Incorporation of animal manures as reinforcing fillers in high-density polyethylene and high-density polypropylene composites (2007)
31. Wood-plastic composites with reduced moisture : effects of chemical modification on durability in the laboratory and field (2007)
32. Nanoindentation of the interphase region of a wood-reinforced polypropylene composite (2007)
33. Theoretical thermal conductivity equation for uniform density wood cells (2008)
34. Sequestration of carbon in harvested wood products for the United States (2008)
35. Effect of tree-growth rate on papermaking fibre properties (2008)
36. Optimization of ECF bleaching of kraft pulp. Part 1, Optimal bleaching of hardwood pulps made with different alkali charges (2008)
37. Validation of laboratory-scale recycling test method of paper PSA label products (2008)
38. The influence of juvenile wood content on shear parallel, compression, and tension perpendicular to grain strength and mode I fracture toughness of loblolly pine at various ring orientation (2008)
39. Effects of fiber processing on properties of fiber and fiberboard made from lodgepole pine treetops (2008)
40. Use of fire-impacted trees for oriented strandboards (2008)
41. Periodate and hypobromite modification of Southern pine wood to improve sorption of copper ion (2008)
42. Complex catalysts from self-repairing ensembles to highly reactive air-based oxidation systems (2007)
43. Ethanol from wood (2008)
44. Performance of copper-based wood preservatives in soil bed exposures (1999/2000)
45. Fiberboard bending properties as a function of density, thickness, resin, and moisture content (2008)
46. Wood protection by commercial silver formulations against Eastern subterranean termites (2007)
47. Nanotechnology : implications for the wood preservation industry (2007)
48. Grading and properties of hardwood structural lumber (2005)
49. The immediate effect of temperature on the modulus of elasticity of green and dry lumber (2008)
50. The genome of an industrial workhorse : sequencing of the filamentous fungus Aspergillus niger offers new opportunities for the production of specialty chemicals and enzymes (2007)
51. Combustion characteristics of north-eastern USA vegetation tested in the cone calorimeter: invasive versus non-invasive plants (2007)
52. Synthesis of ethylene maleic anhydride copolymer containing fungicides and evaluation of their effect for wood decay resistance (2008)
53. Comparison of the effects of gamma irradiation and steam sterilization on Southern pine sapwood (2008)
54. Seasonal response of feeding, differentiation, and growth in the eastern subterranean termite Reticulitermes flavipes (Kollar) in Wisconsin (2007)
55. I-joists and headers (2005)
56. Environmental impact of producing hardwood lumber using life-cycle inventory (2008)
57. Synthesis and evaluation of aminoborates derived from boric acid and diols for protecting wood against fungal and thermal degradation (2008)
58. Arthromyces and Blastosporella, two new genera of conidia-producing lyophylloid agarics (Agaricales, Basidiomycota) from the neotropics (2007)
59. A new method of determining moisture gradient in wood (2008)
60. Investigating the use of small-diameter softwood as guardrail posts: static test results (2007)
61. Material variability and repetitive member allowable property adjustments in forest products engineering (2008)
62. Long-term effects of elevated carbon dioxide on sour orange tree specific gravity and anatomy (2008)
63. Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine (2008)
64. Evaluating shrinkage of wood propellers in a high-temperature environment (2008)
65. Cantilever-beam dynamic modulus for wood composite products. Part 1, apparatus (2008)
66. Small-diameter success stories III. (2008)
67. Thermochemical remediation of preservative-treated wood (2008)
68. Preliminary investigation of biological resistance, water absorption and swelling of thermally compressed pine wood panels (2008)
69. Transfer of termiticidal dust compounds and their effects on symbiotic protozoa of Reticulitermes flavipes (Kollar)  (2008)
70. Red and silver maples : resource availability, utilization, and costs (2005)
71. Corrosion of metals in contact with treated wood : developing test methods (2008)
72. Jute and kenaf (2007)
73. Chemical modification of wood (2007)
74. Regional biodeterioration hazards in the United States (2008)
75. Characterizing wood-plastic composites via data-driven methodologies (2007)
76. Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips (2008)
77. Effect of cyclic long-term temperature exposure on the bending strength of lumber (2008)
78. Improving the color stability of wood-plastic composites through fiber pre-treatment (2008)
79. Some observations of wood density and anatomical properties in a Douglas-fir sample with suppressed growth (2008)
80. Withdrawal strength of bright and galvanized annulary threaded nails (2008)
81. Integrated biomass technologies: future vision for optimally using wood and biomass (2008)
82. Market impacts of hypothetical fuel treatment thinning programs on federal lands in the western United States (2008)
83. Evidence for cleavage of lignin by a brown rot basidiomycete (2008)
84. Role of fungal peroxidases in biological ligninolysis (2008)
85. Enhanced enzymatic hydrolysis of spruce by alkaline pretreatment at low temperature (2008)
86. ASHRAE Standard 160P--criteria for moisture control design analysis in buildings (2008)
87. Naval stores research at the Forest Products Laboratory, past and present (1987)
88. Polymeric additive performance in closed whitewater systems (1984)
89. Assessment of the potential quality of preservative-treated pilings removed from service : [abstract] (1999)
90. More rapid edgewise crush test methods (1993)
91. Potential uses for peroxymonosulfate in pulping and bleaching (1992)
92. Measurements needed for on-line control of retention and drainage (1987)
93. Tall oil precursors of Douglas fir (1980)
94. Preservation of hyphal-forming brown- and white-rot wood-inhabiting basidiomycetes (2001)
95. Nondestructive methods for the structural evaluation of wood floor systems in historic buildings : preliminary results : [abstract] (1999)
96. Evidence of cellulose digestion in the wood boring isopod Sphaeroma terebrans (1999)
97. Prehydrolysis of aspen wood with water and with dilute aqueous sulfuric acid (1982)
98. Prehydrolysis of birch wood with sulfur dioxide (1980)
99. On the palladium-on-charcoal disproportionation of rosin (1985)
100. Ultrasonic inspection and analysis techniques in green and dried lumber (1999)
101. Microscopic observations during longitudinal compression loading of single pulp fibers (1986)
102. Moire strain analysis of paper (1983)
103. Soda-amine pulping : reaction of amines with free phenolic [beta]-[omicron]-4 ethers (1981)
104. Mass spectrometric method to determine the chain length of oligosaccharides attached to phenolic polymers by nonglycosidic linkages (1987)
105. Nonfermentable, glucose-containing products formed from glucose under cellulose acid hydrolysis conditions (1983)
106. Papermaking properties of aspen ultrahigh-yield mechanical pulps (1991)
107. Fluorescence microscopy for measuring fibril angles in pine tracheids (1955)
108. Fixation effects on the release of copper, chromium and arsenic from CCA-C treated marine piles (1999)
109. A PFI mill can be used to predict biomechanical pulp strength properties (1990)
110. Structural composite panel performance under long-term load (1988)
111. Potential for structural lumber substitutes (1985)
112. Optimization of composite wood structural components : processing and design choices (1985)
113. New rapid method for determining edgewise compressive strength of corrugated fiberboard (1986)
114. Measuring the wetting angle and perimeter of single wood pulp fibers : a modified method (1981)
115. A nonlinear theory for elastic plates with application to characterizing paper properties (1984)
116. Measuring the mechanical behavior of paperboard in a changing humidity environment (1986)
117. Temperature corrections for mechanically graded lumber (1999)
118. Optimum fiber distribution in singlewall corrugated fiberboard (1979)
119. Flexural properties of glued-laminated Southern pine beams with laminations positioned by visual-stiffness criteria (1970)
120. Changes in wood microstructure through progressive stages of decay (1968)
121. Some causes of warping in plywood and veneered products (1966)
122. Veneer cutting and drying properties of Pacific madrone (1965)
123. Wood fuel preparation (1965)
124. Wood products manufacture at small sawmills and woodworking plants (1973)
125. Minimum weight structural sandwich (1970)
126. Minimum weight structural sandwich (1965)
127. Preservative treatment of wood for farm use (1965)
128. Chemical treatments for improving compressive strength of linerboard at high moisture conditions (1964)
129. Treatment of kraft paperboards and a kraft pulp with acrylonitrile (1965)
130. Adhesives for bonding wood to metal (1964)
131. Dynamic tension testing equipment for paperboard and corrugated fiberboard (1965)
132. Proceedings of the Symposium on Needs for Nondestructive Testing in the Forest Products Industries (1965)
133. Spanish-cedar : Cedrela spp. (1964)
134. Insulating board, hardboard, and other structural fiberboards (1965)
135. Performance of a rigid and a flexible adhesive in lumber joints subjected to moisture content changes (1964)
136. Hardness, density, and shrinkage characteristics of silk-oak from Hawaii (1964)
137. Linear movement of plywood and flakeboards as related to the longitudinal movement of wood (1964)
138. Angelique : Dicorynia guianensis Amsh. (1964)
139. Buckling coefficients for simply supported and camped flat, rectangular sandwich panels under edgewise compression (1964)
140. Loss from variation in sawing precision (1964)
141. Adhesives for assembly of lightweight wood containers (1964)
142. Some strength and related properties of yagrumo hembra (Cecropia peltata) from Puerto Rico (1964)
143. Methods for evaluating tensile and compressive properties of plastic laminates reinforced with unwoven glass fibers (1964)
144. An assessment of training needs for the lumber manufacturing industry in the eastern United States (2008)
145. Feasibility of producing value-added wood products from reclaimed hemlock lumber (2007)
146. Profile 2007: Softwood sawmills in the United States and Canada  (2007)
147. Use of saltcedar and Utah juniper as fillers in wood–plastic composites (2007)
148. Confidence bounds and hypothesis tests for normal distribution coefficients of variation (2007)
149. Censoring data for resistance factor calculations in load and resistance factor design: a preliminary study (2007)
150. Forest products research and development organizations in a worldwide setting: A review of structure, governance, and measures of performance of organizations outside the United States (2007)
151. Wood (2006)
152. Effect of tree-growth rate on papermaking fiber properties (2007)
153. Full-field local displacement analysis of two-sided paperboard (2007)
154. Moisture performance of a contemporary wood-frame house operated at design indoor humidity levels (2007)
155. Measurements of moisture transport in wood-based materials under isothermal and nonisothermal conditions (2007)
156. Effects of air leakage of residential buildings in mixed and cold climates (2007)
157. Surface characterization of weathered wood-plastic composites produced from modified wood flour (2007)
158. Chlorination of lignin by ubiquitous fungi has a likely role in global organochlorine production (2007)
159. Vision of the U.S. biofuel future: a case for hydrogen-enriched biomass gasification (2007)
160. Possible mechanism for anthraquinone species diffusion in alkaline pulping (2007)
161. Forest products research and development organizations : organization, governance, and measures of performance in a worldwide setting (2007)
162. Hexeneuronic acid content of chemical pulp (2007)
163. The role of the hemicelluloses in the nanobiology of wood cell walls : a systems theoretic perspective (2005)
164. Tests for Z-direction fiber orientation (2007)
165. Cone calorimeter tests of wood-based decking materials (2007)
166. Obtaining value prior to pulping with diethyl oxalate and oxalic acid (2007)
167. The effect of indoor humidity on water vapor release in homes (2007)
168. Acoustic assessment of stress level and potential wood quality of logs affected by oak decline (2007)
169. Equivalent circuit modeling of wood at 12% moisture content (2007)
170. Structural lumber from suppressed-growth ponderosa pine from northern Arizona (2007)
171. Effect of press-drying on static bending properties of plantation-grown No. 2 loblolly pine lumber (2007)
172. Forest thinnings : for integrated lumber and paper production (2007)
173. Mill demonstration of TMP production from forest thinnings : pulp quality, refining energy, and handsheet properties (2007)
174. Fire-retardant-treated strandboard : properties and fire performance (2008)
175. Physical, mechanical, and fire properties of oriented strandboard with fire retardant treated veneers (2007)
176. POM-assisted electrochemical delignification and bleaching of chemical pulp (2001)
177. Feasibility study for eradication of Reticulitermes flavipes from Endeavor, Wisconsin (2007)
178. Enhancing composite durability : using thermal treatments (2007)
179. Issues related to durability and protection affecting the acceptance and use of engineered wood composites in Europe (2007)
180. Fire containment in wood construction doesnÂ’t just happen (2007)
181. Preservative treatments for building components (2007)
182. Using ring width correlations to study the effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.) (2006)
183. Froth conductivity for in situ monitoring of fiber (solid) and wet rejects in flotation deinking (2006)
184. Cornstalk as a source of fiber and energy (2006)
185. Evaluating weather factors and material response during outdoor exposure to determine accelerated test protocols for predicting service life (2005)
186. Determining moisture gradient profile using X-Ray technique (2007)
187. Why good ideas and good science do not always make it into the marketplace (2007)
188. Effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.) (2007)
189. Wood density and anatomical properties in suppressed-growth trees : comparison of two methods (2007)
190. Thermal degradation of wood fibers during hot-pressing of MDF composites. Part I, Relative effects and benefits of thermal exposure (2007)
191. Characterization of weathered wood-plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS (2007)
192. A primer on wood as dock construction material (2007)
193. Chicken feather fiber as an additive in MDF composites (2007)
194. Influence of nanoclay on properties of HDPE/wood composites (2007)
195. Preparation and properties of recycled HDPE/clay hybrids (2007)
196. Violet light causes photodegradation of wood beyond the zone affected by ultraviolet radiation (2007)
197. Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles (2007)
198. Forest Products Laboratory : supporting the nation's armed forces with valuable wood research for 90 years (2007)
199. Durability and mechanical properties of silane cross-linked wood thermoplastic composites (2007)
200. Comparison of multiple gene assembly methods for metabolic engineering (2007)
201. The effect of initial cell concentration on xylose fermentation by Pichia stipitis (2007)
202. Initial preservative treatment of wood in covered bridges (2005)
203. Advanced wood- and bio-composites : enhanced performance and sustainability (2006)
204. Design, development, and testing of a hybrid in situ testing device for building joint sealant (2005)
205. Determination of microstickies in recycled whitewater by headspace gas chromatography (2007)
206. Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs) (2007)
207. Acoustic assessment of wood quality of raw forest materials : a path to increased profitability (2007)
208. New insights into the ligninolytic capability of a wood decay ascomycete (2007)
209. Shuffling of promoters for multiple genes to optimize xylose fermentation in an engineered Saccharomyces cerevisiae strain (2007)
210. Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle (2007)
211. Reduction of Oxidative Stain in Ochoó (Hura crepitans L.) = Reducción de la Mancha de Oxidación en Ochoó (Hura crepitans L.) (2007)
212. U.S. forest products annual market review and prospects, 2004–2008 (2007)
213. Estimating Janka hardness from specific gravity for tropical and temperate species (2007)
214. Acoustic tomography for decay detection in red oak trees (2007)
215. U.S. timber production, trade, consumption, and price statistics 1965 to 2005 (2007)
216. Review of in-service moisture and temperature conditions in wood-frame buildings (2007)
217. A preliminary study of preservative retention and penetration in ACQ-treated timbers using near infrared spectroscopy (2006)
218. Effect of acetylated wood flour or coupling agent on moisture, UV, and biological resistance of extruded woodfiber-plastic composites (2006)
219. Holistic approach to wood protection (2006)
220. Revealing organization of cellulose in wood cell walls by Raman imaging (2007)
221. Higher acid-chlorite reactivity of cell corner middle lamella lignin in black spruce (2007)
222. Opportunities for using bio-based fibers for value-added composites (2006)
223. Modeling of bleach plant washer mineral scale (2004)
224. Coating WPC's using co-extrusion to improve durability (2007)
225. Hampton sets pace for third year : sawmill in Willamina fights off challengers for highest producer (2005)
226. Laboratory-and mill-scale study of surfactant spray flotation deinking (2005)
227. Managing calcium oxalate scale in the bleach plant (2005)
228. Deterioration of wood from live and dead Alaska yellow-cedar in contact with soil (2007)
229. Tensile and thickness swelling properties of strands from Southern hardwoods and Southern pine : effect of hot-pressing and resin application (2007)
230. Transposon mutagenesis to improve the growth of recombinant Saccharomyces cerevisiae on D-xylose (2007)
231. Fuels for schools: case study in Darby, Montana (2007)
232. Guidelines for assigning allowable properties to visually graded foreign species based on test data from full sized specimens (2006)
233. Model for understanding the durability performance of wood adhesives (2007)
234. New method for rapid testing of bond strength for wood adhesives (2007)
235. Dispersion adhesives from soy flour and phenol formaldehyde (2007)
236. Pretreatments for converting wood into paper and chemicals (2007)
237. Composite materials from forest biomass : a review of current practices, science, and technology (2007)
238. Nanoindentation size effects in wood (2007)
239. Wood bonding in the furniture industry and the effect of changing wood supply (2007)
240. Finite element analyses of two dimensional, anisotropic heat transfer in wood (2004)
241. Mechanical property loss and the occurrence of wood decay during experimental outdoor aging of wood based panels (2007)
242. Antifungal effect of essential oils on southern yellow pine (2007)
243. Vapor-phase diethyl oxalate pretreatment of wood chips. Part 2, Release of hemicellulosic carbohydrates (2007)
244. Vapor-phase diethyl oxalate pretreatment of wood chips. Part 1, Energy savings and improved pulps (2007)
245. Neotropical Ascomycetes. 13, Cornipulvina and Erythromada, two new genera from the Caribbean and elsewhere (2005)
246. Effects of various fire-retardants on plate shear and five-point flexural shear properties of plywood (2007)
247. Fungal hydroquinones contribute to brown rot of wood (2006)
248. Phanerochaete chrysosporium genomics (2005)
249. ChargeOut! : determining machine and capital equipment charge-out rates using discounted cash-flow analysis (2007)
250. Globalization and structural change in the U.S. forest sector: an evolving context for sustainable forest management (2007)
251. Using NIR spectroscopy to predict weathered wood exposure times (2006)
252. Chemical modification of wood : a short review (2006)
253. Climate in the Great Lakes Region between 14,000 and 4000 years ago from isotopic composition of conifer wood (2006)
254. Acetylation (2006)
255. Wood inhabiting fungi in Alaska : their diversity, roles, and uses (2005)
256. Use of lignocellulosic materials as sorbents for pesticide and phosphate residues (2006)
257. Characteristics of the wood adhesion bonding mechanism using hydroxymethyl resorcinol (2006)
258. Electrochemical method for measuring corrosion of metals in wood (2006)
259. Structural changes of residual lignin of softwood and hardwood kraft pulp upon oxidative treatment with polyoxometalates (2005)
260. Forest water contamination (2006)
261. Unique preservative tolerance in Tyromyces palustris (2005)
262. The hardwood chip market in 2005 (2005)
263. Quantification of metals in preservatively-treated lumber using laser induced breakdown spectroscopy (2006)
264. Removal of metal ions from contaminated water using agricultural residues (2006)
265. Chemical modification : a non-toxic approach to wood preservation (2006)
266. Small-diameter utilization issues and opportunities (1999)
267. The use of C-near edge X-ray absorption fine structure spectroscopy for the elaboration of chemistry in lignocellulosics (2006)
268. The top 200! : big production numbers in 2005, such as those posted by the Hampton Affiliates sawmill in Willamina, Ore., may be tamed in 2006 (2006)
269. Sawmill profile : new Forest Products Lab report defines the makeup of North America's softwood sawmill industry (2005)
270. Defining the rift : U.S. economist examines the consequences of the differences in U.S. and Canadian stumpage valuations (2005)
271. Good vital signs : the economy as it pertains to the lumber industry remains healthy, but the flu is always lurking (2005)
272. Effect of citric acid modification of aspen wood on sorption of copper ion (2006)
273. Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene (2006)
274. Grading timber and glued structural members (2006)
275. Considerations in the weathering of wood-plastic composites (2007)
276. Effect of source, drying method and treatment schedule on treatability of red pine (2006)
277. An advancement in removing extraneous color from wood for low-magnification reflected-light image analysis of conifer tree rings (2007)
278. Acoustic evaluation of wood quality in standing trees. Part I, Acoustic wave behavior (2007)
279. Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water (2007)
280. Moisture content and the properties of lodgepole pine logs in bending and compression parallel to the grain (2007)
281. Pest risk assessment of the importation into the United States of unprocessed Pinus logs and chips from Australia (2006)
282. Study design considerations in evaluating environmental impacts (2006)
283. Wood products used in the construction of low-rise nonresidential buildings in the United States, 2003 (2005)
284. Single curved fiber sedimentation under gravity (2005)
285. Simulations of flexible fiber suspensions (2005)
286. Fundamental chemistry of precipitation and mineral scale formation (2005)
287. Application of fundamental principles to mineral scale reduction : case studies (2005)
288. Sol-Gel deposition of inorganic alkoxides on wood surfaces to enhance their durability under exposure to sunlight and moisture (2005)
289. Riding the crest of the wave : sawn softwood markets in 2003-2004 (2004)
290. Bioremediation of treated wood with bacteria (2006)
291. Improving playground surface accessibility (2004)
292. A multiproxy environmental investigation of Holocene wood from a submerged conifer forest in Lake Huron, USA (2006)
293. Relationship of host recurrence in fungi to rates of tropical leaf decomposition (2005)
294. Species diversity of polyporoid and corticioid fungi in northern hardwood forests with differing management histories (2006)
295. Structure and transcriptional impact of divergent repetitive elements inserted within Phanerochaete chrysosporium strain RP-78 genes (2007)
296. Uncertainties in corrosion rate measurements of fasteners exposed to treated wood at 100% relative humidity (2007)
297. Effects of size and age on the survival and growth of pulp and paper mills (2004)
298. Computational analysis of the Phanerochaete chrysosporium v2.0 genome database and mass spectrometry identiWcation of peptides in ligninolytic cultures reveal complex mixtures of secreted proteins (2006)
299. Review of test methods used to determine the corrosion rate of metals in contact with treated wood (2005)
300. Creosote movement from treated wood immersed in fresh water (2005)
301. Direct current testing to measure corrosiveness of wood preservatives (2007)
302. Adsorption mechanism of cadmium on juniper bark and wood (2007)
303. FTM-West : fuel treatment market model for U.S. West (2006)
304. Lignification in transgenics deficient in 4-coumarate 3-hydroxylase (C3H)or the associated hydroxycinnamoyl transferase (HCT) (2006)
305. State-of-the-art methods for testing materials outdoors (2004)
306. Modeling and minimization of barium sulfate scale (2006)
307. Sh ble and Cre adapted for functional genomics and metabolic engineering of Pichia stipitis (2006)
308. Strandboard made from soy-based adhesive with high soy content (2005)
309. Analysis of soy flour/phenol-formaldehyde adhesives for bonding wood (2005)
310. Durable soy-based adhesive dispersions (2005)
311. Are epoxy-wood bonds durable enough? (2005)
312. Utility of HoriokaÂ’s and MarraÂ’s models for adhesive failure (2005)
313. Effects of chemically modified wood on bond durability (2005)
314. Assessment of increased wet wood bonding for epoxy-bonded samples using a melamine-urea-formaldehyde priming agent (2005)
315. X-ray photoelectron spectroscopy for characterization of wood surfaces in adhesion studies (2005)
316. Flexural properties of structural lumber products after long-term exposure to high temperatures (2006)
317. Fastener corrosion : testing, research, and design considerations (2006)
318. Development of failure mechanisms for fasteners in the United States (2006)
319. Engineering yeasts for xylose metabolism (2006)
320. Fire performance of oriented strandboard (2006)
321. Extracellular oxidative systems of the lignin-degrading Basidiomycete Phanerochaete chrysosporium (2007)
322. Development of a bending stiffness model for wet process fiberboard (2007)
323. Two-dimensional finite element heat transfer model of softwood. Part III, Effect of moisture content on thermal conductivity (2007)
324. Assessment and maintenance of a 15 year old stress-laminated timber bridge (2006)
325. Environmental effects on the mechanical and thermomechanical properties of aspen fiber–polypropylene composites (2007)
326. Wood products used in new residential construction in the U.S. and Canada, 2003 : with comparisons to 1998 and 1995 (2005)
327. Wood fueled boiler financial feasibility user's manual (2005)
328. Small-diameter roundwood, strong-post W-beam guardrail systems (2006)
329. Exposure test of fasteners in preservative-treated wood (2006)
330. Estimating bridge stiffness using a forced-vibration technique for timber bridge health monitoring (2006)
331. Rapid analysis of abietanes in conifers (2006)
332. Development of a rapid and simple Agrobacterium tumefaciens mediated transformation system for the fungal pathogen Heterobasidion annosum (2006)
333. The decline and fall of Type II error rates (2005)
334. Opportunity and development of bio-based composites (2005)
335. Classical methods and modern analysis for studying fungal diversity (2005)
336. Comparison of fiber length analyzers (2005)
337. Formosan and native subterranean termite attack of pressure-treated SPF wood species exposed in Louisiana (2006)
338. Two-dimensional finite element heat transfer model of softwood. Part II, Macrostructural effects (2006)
339. Two-dimensional finite element heat transfer model of softwood. Part I, Effective thermal conductivity (2006)
340. On measurements of Effective Residual Ink Concentration (ERIC) of deinked papers using Kubelka-Munk theory (2006)
341. Ion exchange of H+, Na+, Mg2+, Ca2+, Mn2+, and Ba2+, on wood pulp (2006)
342. Effects of material parameters on the diffusion and sorption properties of wood-flour/polypropylene composites (2007)
343. Protecting wood from mould, decay, and termites with multi-component biocide systems (2007)
344. Selected properties of MDF and flakeboard overlaid with fiberglass mats (2006)
345. Early detection and progression of decay in L-joints and lap-joints in a moderate decay hazard zone (2006)
346. Microwave drying of wood strands (2005)
347. Extending service life of timber bridges with preservatives (2003)
348. Evaluation of small-diameter timber for value-added manufacturing : a stress wave approach (2003)
349. Harvested wood products : basis for future methodological development (2003)
350. The use of electrochemical impedance spectroscopy (EIS) to measure the corrosion of metals in contact with wood (2005)
351. Influence of photostabilizers on wood flour-HDPE composites exposed to xenon-arc radiation with and without water spray (2006)
352. New species of Psilocybe in the Caribbean, with an emendation of P. guilartensis (2003)
353. Development of a powered outdoor sealant fatigue test apparatus (2005)
354. U.S. hardwood fiber demand and supply situation : globalization and structural change (2005)
355. Development of flexural vibration inspection techniques to rapidly assess the structural health of timber bridge systems (2005)
356. NIR monitoring of in-service wood structures (2005)
357. Detecting decay in wood components (2005)
358. Raman imaging to investigate ultrastructure and composition of plant cell walls : distribution of lignin and cellulose in black spruce wood (Picea mariana) (2006)
359. Method for quantifying percentage wood failure in block-shear specimens by a laser scanning profilometer (2005)
360. Analytical modeling of fire growth on fire-resistive wood-based materials with changing conditions (2006)
361. Acoustic analysis of warp potential of green ponderosa pine lumber (2005)
362. Conundrums regarding 5–O–4- linkages in softwood MWLs (2005)
363. Effects of pressing schedule on formation of vertical density profile for MDF panels (2006)
364. Durability of wood-plastic composites (2006)
365. Principles of minimum cost refining for optimum linerboard strength (2006)
366. Effect of plantation density on kraft pulp production from red pine (Pinus resinosa Ait.) (2006)
367. High-soy-containing water-durable adhesives (2006)
368. Effects of panel density and mat moisture content on processing medium density fiberboard (2006)
369. Accelerated weathering of natural fiber-thermoplastic composites : effects of ultraviolet exposure on bending strength and stiffness (2002)
370. Advances and challenges of wood polymer composites (2006)
371. Wood preservation (2006)
372. Interior moisture design loads for residences (2001)
373. Structural performance of light-frame roof assemblies. I, Truss assemblies designed for high variability and wood failure (1989)
374. Computer optimization of cutting yield from multiple ripped boards (1978)
375. Energy efficiency in light-frame wood construction (1979)
376. Hardwood press-lam crossties : processing and performance (1979)
377. Lumber defect detection by ultrasonics (1978)
378. Investment opportunity : the FPL EGAR lumber manufacturing system (1979)
379. Determining resistance to soft-rot fungi (1965)
380. Proceedings of the Symposium on Nondestructive Testing of Wood.  (1964)
381. Effect of elliptic or circular holes on the stress distribution in plates of wood or plywood considered as orthotropic materials (1944)
382. Inferences from growing trees backwards (1997)
383. Continuous xylose fermentation by Candida shehatae in a two-stage reactor (1988)
384. Effects of culture conditions on the fermentation of xylose to ethanol by Candida shehatae (1985)
385. Strength and life criteria for corrugated fiberboard by three methods (1997)
386. Production of ethanol from xylose by Candida shehatae grown under continuous or fed-batch conditions (1990)
387. Moisture sorption properties of composite boards from esterified aspen fiber (1992)
388. Withdrawal strength of ring-shank nails embedded in southern pine lumber (1997)
389. Identification of coniferous woods (1960)
390. Recycled newspaper fibers as reinforcing fillers in thermoplastics. Part I, Analysis of tensile and impact properties in polypropylene (1994)
391. Wood decay by brown-rot fungi : changes in pore structure and cell wall volume (1991)
392. Conversion of xylose to ethanol under aerobic conditions by Candida tropicalis (1981)
393. Wood preservation (2003)
394. Use of modified pine bark for removal of pesticides from stormwater runoff (2003)
395. Ultrasonic inspection of a glued laminated timber fabricated with defects (2001)
396. Finishability of CCA pressure-treated wood (2000)
397. Forest management and the diversity of wood-inhabiting fungi (1999)
398. Highly filled formaldehyde-free natural fiber polypropylene composites (2000)
399. Preservative-treated wood and alternative products in the Forest Service (2006)
400. The operating regime in mechanical pulps--the significance of fiber failure (2004)
401. Wood construction codes issues in the United States (2006)
402. Mineral scale management Part III, Nonprocess elements in the paper industry (2006)
403. Handsheet formation and mechanical testing via fiber-level simulations (2004)
404. Time–temperature superposition principle applied to a kenaf-fiber/high-density polyethylene composite (2005)
405. If America had CanadaÂ’s stumpage system (2006)
406. Adhesive bonding of wood treated with ACQ and copper azole preservatives (2006)
407. Cadmium ion sorption onto lignocellulosic biosorbent modified by sulfonation : the origin of sorption capacity improvement (2005)
408. Hampton at Willamina is #1 : Seneca, Weyerhaeuser mills follow (2003)
409. Status and trends : profile of structural panels in the United States and Canada (2006)
410. JMFA2—a graphically interactive Java program that fits microfibril angle X-ray diffraction data (2006)
411. LamLum : a tool for evaluating the financial feasibility of laminated lumber plants (2006)
412. Wood structure and adhesive bond strength (2006)
413. Selected mesostructure properties in loblolly pine from Arkansas plantations (2006)
414. A comparison of wood preservatives in posts in southern Mississippi : results from a half-decade of testing (2005)
415. Permanence and diffusion of borax-copper hydroxide remedial preservative applied to unseasoned pine posts : 10 year update (2005)
416. Effects of moisture on aspen-fiber/polypropylene composites (2004)
417. Latest advancements in the acetylation of wood fibers to improve performance of wood composites (2004)
418. Thermal load histories for North American roof assembles using various cladding materials including wood-thermoplastic composite shingles  (2006)
419. Corrosion avoidance with new wood preservatives (2006)
420. Statistical analysis of influence of soil source on leaching of arsenic and copper from CCA-C treated wood (2006)
421. Box compression analysis of world-wide data spanning 46 years (2006)
422. FE analysis of creep and hygroexpansion response of a corrugated fiberboard to a moisture flow : a transient nonlinear analysis (2006)
423. Using acoustic analysis to presort warp-prone ponderosa pine 2 by 4s before kiln-drying (2006)
424. Mineral scale management. Part II, Fundamental chemistry (2006)
425. Binderless fiberboard : comparison of fiber from recycled corrugated containers and refined small-diameter whole treetops (2006)
426. Estimating heating times of wood boards, square timbers, and logs in saturated steam by multiple regression (2006)
427. Penetration of naphthalene, n-hexadecane, and 2,4-dinitrotoluene into southern yellow pine under conditions modeling spills and floods (2006)
428. Structural condition assessment of in-service wood (2006)
429. Potential sources of variation that influence the final moisture content of kiln-dried hardwood lumber (2004)
430. Chemical modification : a non-toxic approach to wood preservation (2005)
431. Structure, organization, and transcriptional regulation of a family of copper radical oxidase genes in the lignin-degrading basidiomycete Phanerochaete chrysosporium (2006)
432. Using nano- and micro-particles of silver in lignin analysis (2006)
433. Pulp & paper markets cope with high energy prices and growth in Asia : markets for paper, paperboard and woodpulp, 2005-2006 (2006)
434. Dynamics of phytophagous insects and their pathogens in Alaskan boreal forests (2006)
435. Bioremediation of treated wood with fungi (2006)
436. Invasive forest species (2006)
437. Mineral scale management. Part 1, Case studies (2006)
438. Tolerance of Serpula lacrymans to copper-based wood preservatives (2005)
439. Kraft pulp from budworm-infested jack pine (2006)
440. Properties and grading of Danto and Ramon 2 by 4Â’s (2006)
441. Acoustic evaluation of standing trees : recent research development (2005)
442. A new mechanism of biopulping : attachment of acid groups on fiber (2004)
443. Trends in the production and consumption of major forest products in the United States : charts for use in classes or meetings (1984)
444. Limited evaluation of physical and mechanical properties of Nepal alder grown in Hawaii (1964)
445. Wood anatomy of the neotropical Sapotaceae. VII, Chrysophyllum (1978)
446. Wood anatomy of the neotropical Sapotaceae. VI, Chloroluma (1978)
447. Wood anatomy of the neotropical Sapotaceae. V, Calocarpum (1978)
448. Wood anatomy of the neotropical Sapotaceae. IV, Achrouteria (1978)
449. Strength of bolted wood joints with various ratios of member thicknesses (1978)
450. Bending strength of water-soaked glued laminated beams (1978)
451. Hardboard-webbed I-beams : effects of long-term loading and loading environment (1978)
452. Structural feasibility of parallel-laminated veneer crossarms (1977)
453. Differential reliability : probabilistic engineering applied to wood members in bending-tension (1978)
454. Racking strength of walls : let-in corner bracing, sheet materials, and effect of loading rate (1977)
455. Effect of light quality on development of fruiting bodies of Panus fragilis (1977)
456. A commercial application of fire retardants to dry-formed hardboards (1977)
457. Behavior of an epoxy-polysulfide adhesive in wood joints exposed to moisture content changes (1965)
458. Forest products research and development organizations in a worldwide setting : a review of structure, governance, and measures of performance (2006)
459. NMR analysis of lignins in CAD-deficient plants. Part 1, Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins (2003)
460. Durable wood bonding with epoxy adhesives (2003)
461. Nondestructive structural evaluation of wood floor systems with a vibration technique. (2002)
462. Effect of coating systems on the vaporization of pentachlorophenol from treated wood (1983)
463. Recent economic downturn and pulpwood markets (2002)
464. Evaluation of silvicultural treatments and biomass use for reducing fire hazard in western states (2006)
465. Lumber processing in selected sawmills in Durango and Oaxaca, Mexico (2006)
466. Moldicidal properties of seven essential oils (2006)
467. The role of oxalic acid in tolerance to NÂ’N-napthaloylhydroxylamine in Tyromyces palustris (2006)
468. Profile extrusion and mechanical properties of crosslinked wood–thermoplastic composites (2006)
469. Geometric model for softwood transverse thermal conductivity. Part I (2005)
470. Evaluation of forest thinning materials for TMP production (2005)
471. Using a quasi-heat-pulse method to determine heat and moisture transfer properties for porous orthotropic wood products or cellular solid materials (2006)
472. Column compression strength of tubular packaging forms made from paper (2006)
473. Effects of coumarate 3-hydroxylase down-regulation on lignin structure (2006)
474. Combustion properties of Bromus tectorum L.: influence of ecotype and growth under four CO2 concentrations (2006)
475. Natural durability of tropical and native woods against termite damage by Reticulitermes flavipes (Kollar) (2006)
476. Electron exchange between r-keggin tungstoaluminates and a well-defined cluster-anion probe for studies in electron transfer (2005)
477. The effect of CaCl2 on growth rate, wood decay and oxalic acid accumulation in Serpula lacrymans and related brown-rot fungi (2006)
478. Fire and bending properties of blockboard with fire retardant treated veneers (2006)
479. Nanotechnology applications in the forest products industry (2006)
480. Advancing cellulose-based nanotechnology (2006)
481. Merging weather data with materials response data during outdoor exposure (2002)
482. A strategic assessment of forest biomass and fuel reduction treatments in western states (2003)
483. Wood : mechanical fasteners (2001)
484. Emergency housing systems from three-dimensional engineered fiberboard : temporary building systems for lightweight, portable, easy-to-assemble, reusable, recyclable, and biodegradable structures (2006)
485. Development of test apparatus for service life prediction of sealant formulations and evaluation of data from 18 months of outdoor weathering (2004)
486. Wood anatomy of the Brazilian species of Swartizia and considerations within the tribe Swartzieae (2002)
487. Fire resistance of structural composite lumber products (2006)
488. Janka hardness using nonstandard specimens (2006)
489. The ins and outs of caulking (2006)
490. Small-diameter success stories II (2006)
491. Nanotechnology for the forest products industry: vision and technology roadmap (2005)
492. Determination of transverse elastic constants of wood using a cylindrically orthotropic model (2003)
493. The hardwood chip market in 2004 : up in the North/Down in the South : so what's up? (2005)
494. Application of laboratory fungal resistance tests to solid wood and wood-plastic composite (2003)
495. Detecting and identifying termites in a structure (2006)
496. Flammability tests for regulation of building and construction materials (2006)
497. Changes in wood flour/HDPE composites after accelerated weathering with and without water spray (2005)
498. Use of the cone calorimeter to detect seasonal differences in selected combustion characteristics of ornamental vegetation (2005)
499. Comparison study of thickness swell performance of commercial oriented strandboard flooring products (2005)
500. Wood flour (2005)
501. Natural fibers (2005)
502. Synthesis and evaluation of borates derived from boric acid and diols for the protection of wood against fungal decay and thermal degradation (2004)
503. Annual patents review, January-December 2004 (2005)
504. Studies of lignin transformation in polyoxometalate (POM) bleaching of kraft pulp (2005)
505. NDE of logs and standing trees using new acoustic tools : technical application and results (2005)
506. 2000 national fire plan and its ramifications for wood supply from western national forests (2001)
507. Examination of adhesive penetration in modified wood using fluorescence microscopy (2005)
508. Dynamic characteristics of timber bridges as a measure of structural integrity (2003)
509. Characterizing wood properties of small diameter Northwest trees (2002)
510. Resupinate fungi (Basidiomycetes, Aphyllophoraies) of Macquarie Island, Australia (2002)
511. Land use history, environment, and tree composition in a tropical forest (2002)
512. Studies in neotropical polypores. 11, Antrodia aurantia, a new species from the Dominican Republic, Greater Antilles (2001)
513. New species of Oudemansiella and Pouzarella (Basidiomycetes: Agaricales) from Puerto Rico (2002)
514. Sustainable composites from natural resources (2002)
515. Molecular genetics of lignin-degrading fungi and their applications in organopollutant degradation (2002)
516. Mechanical grading of round timber beams (2006)
517. Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites (2006)
518. Properties of structural panels fabricated from bioremediated CCA-treated wood: pilot scale (2006)
519. Stress-wave velocity of wood-based panels: effect of moisture, product type, and material direction (2006)
520. Thermal energy, electricity, and transportation fuels from wood (2006)
521. Effect of various fire retardants on surface roughness of plywood (2006)
522. U.S. Forest products annual market review and prospects, 2000-2003 (2002)
523. U.S. Forest products annual market review and prospects, 1999–2002 (2001)
524. Durability of exterior natural wood finishes in the Pacific Northwest (1980)
525. Wood anatomy of the neotropical Sapotaceae : XVII. Gambeya (1980)
526. Wood anatomy of the neotropical Sapotaceae : XVI. Paralabatia (1980)
527. Wood anatomy of the neotropical Sapotaceae : XV. Sandwithiodoxa (1980)
528. Wood anatomy of the neotropical Sapotaceae : XIV. Elaeoluma (1980)
529. Simulation of hardwood log sawing (1979)
530. Strength of log bridge stringers after several yearÂ’s use in southeast Alaska  (1979)
531. California black oak drying problems and the bacterial factor (1979)
532. Analysis of orthotropic beams (1979)
533. Modification of wood fiber using steam (2002)
534. Stability and structure in [alpha]- and [beta]-keggin heteropolytungstates, [Xn+W12O40](8-n)-, X = p-block cation (2002)
535. Taking inventory of woody residuals (2003)
536. Venting of attics & cathedral ceilings  (2002)
537. Identification of phanerosporic acid in birch degraded by Phanerochaete chrysosporium (2003)
538. Microcellular nanocomposite injection molding process (2003)
539. Wood and fish residuals composting in Alaska (2002)
540. New species of Amanita from the Dominican Republica, Greater Antilles (2001)
541. Basidiomycetes of the Greater Antilles project (2002)
542. Recognizing and treating diseases in Caribbean trees  (2002)
543. Effects of moisture on aspen-fiber/polypropylene composites  (2002)
544. Applications of polyamide/cellulose fiber/wollastonite composites for microcellular injection molding (2003)
545. Hygrophoraceae (Agaricales) of the Greater Antilles : Hygrocybe subgenus Pseudohygrocybe sections Coccineae and Neohygrocybe (2004)
546. Heterologous expression of laccase cDNA from Ceriporiopsis subvermispora yields copper-activated apoprotein and complex isoform patterns (2003)
547. Comparison of macrostickies measurement methods (2003)
548. Semiannual patents review July 2002–December 2002 (2003)
549. Gradual upturn underway in paper, paperboard and woodpulp markets (2002)
550. Mechanical properties of gypsum board at elevated temperatures (2003)
551. Biological resistance of polyethylene composites made with chemically modified fiber or flour (2002)
552. Interaction of copper wood preservatives and adhesives (2003)
553. Analysis of D-glucose metabolism of wood decay fungi using 13C-NMR and 13C-labeled substrates (2003)
554. What do you need to know to get started with wood and fish waste composting? (2002)
555. Semiannual patents review, July 2001-December 2001 (2002)
556. Use of lignocellulose materials as sorption media for phosphorus removal (2002)
557. Can melamine-based wood primers help in understanding bonded wood durability? (2006)
558. Effects of swelling forces on the durability of wood adhesive bonds (2006)
559. Weathering of wood (2005)
560. Wood and society (2005)
561. Chemical, physical and biological factors affecting wood decomposition in forest soils (2004)
562. ICT and the paperboard and packaging industry (2005)
563. Higher demand and production in 2004, but growth wavers in 2005 : markets for paper, paperboard and woodpulp, 2004-2005 (2005)
564. Effect of weathering variables on the lightness of high-density polyethylene woodflour composites (2005)
565. Nanotechnology opportunities in residential and non-residential construction (2005)
566. Achieving resource sustainability and enhancing economic development through biomass utilization (2005)
567. Determining the suitability of Lactobacilli antifungal metabolites for inhibiting mould growth (2005)
568. Treatability of SPF framing lumber with CCA and borate preservatives (2005)
569. Nanotechnology for the forest products industry (2005)
570. Quincy Mine Blacksmith Shop : condition assesment of timbers (2005)
571. Comparison of microstickies measurement methods. Part I, sample preparation and measurement methods (2003)
572. Ethanol fermentation on the move (2005)
573. Stress singularities in a model of a wood disk under sinusoidal pressure (2005)
574. Adhesive bonding and performance testing of bonded wood products (2005)
575. Surface chemistry and mechanical property changes of wood-flour/high-density-polyethylene composites after accelerated weathering (2004)
576. Advancing sustainable forestry by using engineered wood or bio-composites (2005)
577. Earlywood and latewood elastic properties in loblolly pine (2005)
578. Effects of a new GUP-B fire retardant on mechanical properties of Korean pine when exposed to elevated temperature (2005)
579. Test method for assessing resistance of pine lumber and waferboard to mold (2005)
580. Chemical and mechanical aspects of HMR primer in relationship to wood bonding (2005)
581. Performance of finishes on western juniper lumber and particleboard during outdoor exposure (2005)
582. Using wood composites as a tool for sustainable forestry (2005)
583. Feasibility of using building deconstruction at WisconsinÂ’s Badger Army Ammunition Plant : salvaging lumber for reuse in low-income home construction (2005)
584. U.S. forest products annual market review and prospects, 2002–2006 (2006)
585. Separation of Dalbergia nigra from Dalbergia spruceana (2006)
586. Regulatory and policy issues for reuse and remanufacture of wood materials coated with lead-based paint (2005)
587. Removal of phosphorus using AMD-treated lignocellulosic material (2005)
588. Effects of diterpene acids on components of a conifer bark beetle-fungal interaction : tolerance by Ips pini and sensitivity by its associate Ophiostoma ips (2005)
589. The nop gene from Phanerochaete chrysosporium encodes a peroxidase with novel structural features (2005)
590. Processive endoglucanase active in crystalline cellulose hydrolysis by the brown rot Basidiomycete Gloeophyllum trabeum (2005)
591. Treatment of wood with glucose-diammonium phosphate for fire and fungal decay protection (2002)
592. Sinapate dehydrodimers and sinapate−ferulate heterodimers in cereal dietary fiber (2003)
593. FT-Raman study of dehydrogenation polymer (DHP) lignins (2003)
594. Mold inhibition on unseasoned southern pine (2003)
595. Acoustic testing to enhance western forest values and meet customer wood quality needs (2005)
596. Brasiliocroton : a new crotonoid genus of Euphorbiaceae s.s. from eastern Brazil (2005)
597. Carbon starvation in glacial trees recovered from the La Brea tar pits, southern California (2005)
598. Profiling of oligolignols reveals monolignol coupling conditions in lignifying poplar xylem (2004)
599. Lignins : natural polymers from oxidative coupling of 4-hydroxyphenyl-propanoids (2004)
600. Oligocene terrestrial strata of northwestern Ethiopia : a preliminary report on paleoenvironments and paleontology (2005)
601. Water removal of wet veneer by roller pressing (2004)
602. Development of unbonded and bonded areas in relation to Populus species wood characteristics in grinding (2004)
603. The new higher level classification of eukaryotes with emphasis on the taxonomy of protists (2005)
604. The Phanerochaete chrysosporium secretome : database predictions and initial mass spectrometry peptide identifications in cellulose-grown medium (2005)
605. DonÂ’t get (sun) burned : exposing exterior wood to the weather prior to painting contributes to finish failure (2005)
606. Orthophosphate sorption onto lanthanum-treated lignocellulosic sorbents (2005)
607. Novel visualization studies of lignocellulosic oxidation chemistry by application of C-near edge X-ray absorption fine structure spectroscopy (2005)
608. The complex of xylan and iodine: the induction and detection of nanoscale order (2005)
609. Xylitol production by a Pichia stipitis D-xylulokinase mutant (2005)
610. Lumen modifications (2005)
611. Chemical modification of wood (2005)
612. Wood thermoplastic composites (2005)
613. Fiber webs (2005)
614. Chemistry of wood strength (2005)
615. Wood composites (2005)
616. Wood adhesion and adhesives (2005)
617. Surface characterization (2005)
618. Thermal properties (2005)
619. Biological properties (2005)
620. Moisture properties (2005)
621. Cell wall chemistry (2005)
622. Structure and function of wood (2005)
623. Influence of board density, mat construction, and chip type on performance of particleboard made from eastern redcedar (2004)
624. Nondestructive evaluation of incipient decay in hardwood logs (2005)
625. Two-year Wisconsin thermal loads for roof assemblies and wood, wood–plastic composite, and fiberglass shingles (2005)
626. U.S. forest products annual market review and prospects, 2001–2005. (2005)
627. Field performance of stress-laminated highway bridges constructed with glued laminated timber (2004)
628. Using wood-based structural products as forest management tools to improve forest health, sustainability and reduce forest fuels : a research program of the USDA Forest Service under the National Fire Plan (2002)
629. The role of solid state 13 C NMR spectroscopy in studies of the nature of native celluloses (1999)
630. Kings Covered Bridge rehabilitation, Somerset County, PA (2005)
631. Nondestructive assessment of timber bridges using a vibration-based method (2005)
632. Use of digital image correlation to study the local deformation field of paper and paperboard  (2005)
633. Nanotechnology for forest products. Part 1 (2005)
634. Accelerated weathering of natural fiber-filled polyethylene composites (2004)
635. Correlation of adhesive strength with service life of paint applied to weathered wood (2004)
636. Antifungal metabolites of lactobacilli (2004)
637. Hardwoods for timber bridges : a national program emphasis by the USDA Forest Service (2005)
638. Monitoring liquid and solid content in froth using conductivity (2005)
639. Drainage and fractionation of wood fibers in a flotation froth (2005)
640. Evaluation of a reduced section modulus model for determining effects of incising on bending strength and stiffness of structural lumber (2005)
641. Tensile and dimensional properties of wood strands made from plantation southern pine lumber (2005)
642. On fiber rejection loss in flotation deinking (2005)
643. Pennsylvania hardwood timber bridges : field performance after 10 years (2004)
644. Low frequency vibration approach for assessing performance of wood floor systems (2005)
645. Improvement of cadmium ion removal by base treatment of juniper fiber (2004)
646. Copper tolerance of brown-rot fungi : oxalic acid production in southern pine treated with arsenic-free preservatives (2005)
647. Chlorination and cleavage of lignin structures by fungal chloroperoxidases (2003)
648. Gas chromatographic determination of 1.8-naphthalimide, N-hydroxy-1.8- naphthalimide (N,N-naphthaloylhydroxylamine) and the sodium salt of N-hydroxy-1.8-naphthalimide (2003)
649. Formosan subterranean termite resistance to heat treatment of Scots pine and Norway spruce (2003)
650. Durability of structural lumber products after exposure at 82°C and 80% relative humidity (2005)
651. Review of alternative measures of softwood sawtimber prices in the United States (2005)
652. The decline and fall of Type II error rates (2005)
653. Treatability of underutilized northeastern species with CCA and alternative wood preservatives (2005)
654. Condition assessment of timber bridges. 2, Evaluation of several stress-wave tools  (2005)
655. Fuel to burn : economics of converting forest thinnings to energy using BioMax in southern Oregon (2005)
656. Deinking selectivity (Z-factor) : a new parameter to evaluate the performance of flotation deinking process (2004)
657. Environmental concentrations of copper, chromium, and arsenic released from a chromated-copper-arsenate-(CCA-C-) treated wetland boardwalk (2005)
658. Profile 2005 : softwood sawmills in the United States and Canada (2005)
659. Long-term stake evaluations of waterborne copper systems (2003)
660. Effect of weathering on chromated copper arsenate (CCA) treated wood : leaching of metal salts and change in water repellency (2003)
661. Treated wood in transition : a look at CCA and the candidates to replace it (2003)
662. Pleistocene plant fossils in and near La Selva Biological Station, Costa Rica (2003)
663. Two dimensional finite element heat transfer models for softwood (2004)
664. Processing of fibre suspensions at ultra-high consistencies (2004)
665. Some recent developments in headspace gas chromatography (2005)
666. Wood used in industrial markets in the United States--2000 (2002)
667. Strength of orthotropic materials subjected to combined stresses (1962)
668. Manufacture and performance of full size structural flakeboards from Douglas-fir forest residues (1978)
669. Data basic to the engineering of reconstituted flakeboard (1979)
670. Reel wheels : an application of material science (1979)
671. Construction variables considered in fabrication of a structural flakeboard (1978)
672. Procedure and computer program to calculate machine contribution to sawmill recovery (1981)
673. Strength and stiffness of small glued-laminated beams with different qualities of tension laminations (1981)
674. Laminated beams of isotropic or orthotropic materials subjected to temperature change (1980)
675. Sawing to reduce warp in plantation red pine studs (1972)
676. How to make a laminated diving board (1965)
677. Detection of brown-rot antigens in southern pine (1996)
678. Synthesis and evaluation of borates derived from boric acid for fire and decay protections (1999)
679. Accelerated aging of phenolic-bonded flakeboards (1978)
680. Angle to grain strength of dowel-type fasteners (1987)
681. Assessment of modification factors for a row of bolts or timber connectors (1980)
682. High-temperature drying of 7/4 yellow-poplar flitches for S-D-R studs (1980)
683. Wood anatomy of the neotropical Sapotaceae. XIX, Chromolucuma (1980)
684. Wood anatomy of the neotropical Sapotaceae. XVIII, Gomphiluma (1980)
685. Stiffness and shrinkage of green and dry joists (1964)
686. Industrial trials of low-expansivity sawblades (1992)
687. Differential scanning calorimetry of the effects of temperature and humidity on phenol-formaldehyde resin cure (1994)
688. The strength of Norwegian glued laminated beams (1992)
689. Seismic performance of low-rise wood buildings (1992)
690. Steam-assisted hot-pressing of construction plywood (1994)
691. Steam injection pressing : large panel fabrication with southern hardwoods (1986)
692. Resin characterization (1990)
693. Dimensional stability of flakeboards as affected by board specific gravity and flake alignment (1982)
694. Automation of a laboratory particleboard press (1982)
695. Sawing to reduce warp in plantation red pine studs (1972)
696. Seismic behavior of low-rise wood frame buildings  (1988)
697. Nondestructive assessment of single-span timber bridges using a vibration- based method (2005)
698. Heat sterilization times of five hardwood species (2005)
699. Improved utilization of small-diameter ponderosa pine in glulam timber (2005)
700. Time- and cost-saving apparatus for analytical sample filtration (2005)
701. Development of new microwave-drying and straightening technology for low-value curved timber (2005)
702. Resistance of borax–copper treated wood in aboveground exposure to attack by Formosan subterranean termites (2005)
703. Designated fiber stress for wood poles (2005)
704. Wood siding : installing, finishing, maintaining (1983)
705. Laccase modification of the physical properties of bark and pulp of loblolly pine and spruce pulp (2004)
706. Enzymology and molecular biology of lignin degradation (2004)
707. The challenge of bonding treated wood (2004)
708. Improved water resistance of bio-based adhesives for wood bonding (2004)
709. Finite element analyses of wood laminated composite poles (2005)
710. Hampton Mill maintains title : top twelve producer mills are in Northwest (2004)
711. Nanotechnology for forest products. Part 2 (2005)
712. Light-induced yellowing of selectively 13C-enriched dehydrogenation polymers (DHPs). Part 2, NMR assignments and photoyellowing of aromatic ring 1-, 3-, 4-, and 5-13C DHPs (2004)
713. Light-induced yellowing of selectively 13C-enriched dehydrogenation polymers (DHPs). Part 1, Side-chain 13C-enriched DHP ([alpha], [beta], and [gamma]-13C) (2004)
714. Specific adhesion model for bonding hot-melt polyamides to vinyl (2004)
715. Dynamic drainage of froth with wood fibers (2005)
716. Remilling of salvaged wood siding coated with lead-based paint. Part 2, Wood product yield (2005)
717. Remilling of salvaged wood siding coated with lead-based paint. Part 1, Lead exposure (2005)
718. Controlling moisture content of wood samples using a modified soil-pan decay method (2005)
719. Comparing energy use and environmental emissions of reinforced wood doors and steel doors (2005)
720. Method for interconverting drying and heating times between round and square cross sections of ponderosa pine (2005)
721. United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1989 (1993)
722. Packaging perspective, 1910-1985 (1985)
723. Airborne sound transmission loss characteristics of woodframe construction (1985)
724. Veneer cutting and drying properties of tupelo (1963)
725. Portable apparatus for surface evaluation of furniture panels (1963)
726. Inside wood : a short trip into the interior for the layman (1963)
727. The identification of Douglas-fir wood (1963)
728. Electric moisture meters for wood (1963)
729. Effect of number of piles [i.e. plies] on the tear resistance of paper (1963)
730. An electrical strain gage for the tensile testing of paper (1963)
731. Mechanical grading of 6-inch-diameter lodgepole pine logs for the travelersÂ’ rest and rattlesnake creek bridges (2005)
732. Condition assessment of timber bridges. 1, Evaluation of a micro-drilling resistance tool (2005)
733. Response of corrugated fiberboard to moisture flow : a 3-D finite element transient nonlinear analysis (2003)
734. Curbing indoor mold growth with mold inhibitors (2004)
735. Attic and crawlspace ventilation : implications for homes located in the urban-wildland interface (2004)
736. An investigation into the potential of ionic silver as a wood preservative (2004)
737. Understanding properties of commercial OSB products (2004)
738. 3D structural panels : a literature review (2004)
739. Evaluating the warping of laminated particleboard panels (2004)
740. Micro and colloidal stickie pacification with precipitated calcium carbonate (2004)
741. Roles of surfactants in flotation deinking (2004)
742. Use of acousto-ultrasonic techniques to determine properties of remanufactured particleboards made solely from recycled particles (2005)
743. Evaluation and process development of salt cedar and juniper biocomposites as tools to utilize exotic and invasive species and restore native ecosystems (2005)
744. Recent developments in spectroscopic and chemical characterization of cellulose (2005)
745. Serpula lacrymans, the dry rot fungus and tolerance towards copper-based wood preservatives (2005)
746. Long-term efficacy of wood dip-treated with multicomponent biocides (2005)
747. Relationship between radial compressive modulus of elasticity and shear modulus of wood (2005)
748. Mechanical properties for a wet-processed fiberboard made from small-diameter lodgepole pine treetop material (2005)
749. Physical and mechanical properties and fire, decay, and termite resistance of treated oriented strandboard  (2005)
750. “Self-absorption” phenomenon in near-infrared Fourier transform Raman spectroscopy of cellulosic and lignocellulosic materials (2005)
751. Wood adhesives prepared from lucerne fiber fermentation residues of Ruminococcus albus and Clostridium thermocellum (2005)
752. Raman imaging of lignin and cellulose distribution in black spruce wood (Picea mariana) cell walls  (2005)
753. Predicting photoyellowing behaviour of mechanical pulp containing papers (2005)
754. Raman spectra of lignin model compounds (2005)
755. Shear design of wood beams : state of the art (1988)
756. Investment opportunity : the FPL low-cost solar dry kiln (1988)
757. VENVAL : a plywood mill cost accounting program (1991)
758. A collection of log rules (1973)
759. Taper of wood poles (1974)
760. How pallets with red oak deckboards performed in use (1975)
761. Allowable bending stresses of wood for use in portable wood ladders (1975)
762. Electric moisture meters for wood (1988)
763. The formaldehyde problem in wood-based products : an annotated bibliography (1977)
764. Thermal conductive properties of wood, green or dry, from -40° to +100° C: a literature review (1977)
765. Critical literature review of relationships between processing parameters and physical properties of particleboard (1977)
766. Methanol from wood waste : a technical and economic study (1977)
767. Estimating effective heating value of wood or bark fuels at various moisture contents (1977)
768. PARVCOST : a particleboard variable cost program (1977)
769. Selection, production, procurement, and use of preservative treated wood : supplementing federal specification TT-W-571 (1977)
770. Economic analysis of wood- or bark-fired systems (1978)
771. An information retrieval system for research file data (1978)
772. Extractives in eastern hardwoods : a review (1979)
773. Nondestructive testing methods to predict effect of degradation on wood : a critical assessment (1978)
774. Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards (1978)
775. Historical considerations in evaluating timber structures (1979)
776. Evolution of allowable stresses in shear for lumber (1979)
777. Deuteromycetes and selected ascomycetes that occur on or in wood: an indexed bibliography (1979)
778. Increment cores : how to collect, handle and use them (1979)
779. Survey of existing performance requirements in codes and standards for light-frame construction (1980)
780. Stress-wave grading techniques on veneer sheets (1979)
781. Evolution of tensile design stresses for lumber (1979)
782. EVALUE : a computer program for evaluating investments in forest products industries (1980)
783. A summary of modulus of elasticity and knot size surveys for laminating grades of lumber (1981)
784. FORDAT : an information retrieval system for forest economic data (1981)
785. Plane stress analysis of wood members using isoparametric finite elements, a computer program (1983)
786. COMPARE : a method for analyzing investment alternatives in industrial wood and bark energy systems (1983)
787. DEP : a computer program for evaluating lumber drying costs and investments (1983)
788. Log sort yard economics, planning, and feasibility (2004)
789. Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites: a review (2002)
790. Successful approaches to recycling urban wood waste (2002)
791. Review of log sort yards (2002)
792. Conversion of board foot scaled logs to cubic meters in Washington State, 1970–1998 (2002)
793. Heating times for round and rectangular cross sections of wood in steam (2001)
794. Formation and properties of juvenile wood in southern pines: a synopsis (2001)
795. Derivation of nominal strength for wood utility poles (2001)
796. Evolution of standardized procedures for adjusting lumber properties for change in moisture content (2001)
797. Procedures for developing allowable properties for a single species under ASTM D1990 and computer programs useful for the calculations (2001)
798. Standard plans for timber bridge superstructures (2001)
799. Pest risk assessment of the importation into the United States of unprocessed Eucalyptus logs and chips from South America (2001)
800. Guidelines for design, installation, and maintenance of a waterproof wearing surface for timber bridge decks (2001)
801. Guide for minimizing the effect of preservative-treated wood on sensitive environments (2001)
802. Estimates of air drying times for several hardwoods and softwoods (2000)
803. Potential for expanding small diameter timber market : assessing use of wood posts in highway applications (2000)
804. U.S. timber production, trade, consumption, and price statistics, 1963-1994 (1997)
805. Multiple-bolted joints in wood members : a literature review (1997)
806. Review of thickness swell in hardboard siding : effect of processing variables (1997)
807. National Conference on Wood Transportation Structures (1996)
808. Economic feasibility of products from inland West small-diameter timber (1996)
809. Waste-wood-derived fillers for plastics (1996)
810. Waste-wood-derived fillers for plastics (1996)
811. Capacity, production, and manufacture of woodbased panels in the United States and Canada  (1996)
812. Recycling of wood and paper products in the United States (1996)
813. Capacity, production, and manufacturing of woodbased panels in North America (1994)
814. Kiln drying lumber in the United States : a survey of volume, species, kiln capacity, equipment, and procedures, 1992-1993 (1994)
815. Literature review on use of nonwood plant fibers for building materials and panels (1994)
816. Forest products from Latin America : annotated bibliography of world literature on research, industry, and resource of Latin America 1915 to 1989 (1993)
817. Northeast economic data and retrieval system (1993)
818. Dissolving pulp industry : market trends (1993)
819. Historical price trends of nonconiferous tropical logs and sawnwood imported to the United States, Europe, and Japan (1993)
820. Development of a six-year research needs assessment for timber transportation structures (1993)
821. Fortran programs for reliability analysis (1992)
822. Relative drying times of 650 tropical woods : estimation by green moisture content, specific gravity, and green weight density (1991)
823. Exterior wood in the South : selection, applications, and finishes (1991)
824. Forest products from Latin America : an almanac of the state of the knowledge and the state of the art (1991)
825. PLYMAP : a computer simulation model of the rotary peeled softwood plywood manufacturing process (1990)
826. Computer programs for adjusting the mechanical properties of 2-inch dimension lumber for changes in moisture content (1990)
827. Choosing and applying fire-retardant-treated plywood and lumber for roof designs (1989)
828. Light-frame wall and floor systems : analysis and performance (1989)
829. Dry kiln schedules for commercial woods : temperate and tropical (1988)
830. Treatments that enhance physical properties of wood (1987)
831. Bolted-connection design (1987)
832. Two-stage, dilute sulfuric acid hydrolysis of wood : an investigation of fundamentals (1985)
833. Electron transfer from alpha-keggin anions to dioxygen (2004)
834. Three-dimensional engineered fiberboard : opportunities for the use of low valued timber and recycled material (2004)
835. Competitive soybean flour/phenol-formaldehyde adhesives for oriented strandboard (2004)
836. Enhancement of cadmium ion sorption capacity of lignocellulosic bio-sorbent by sulfonation (2003)
837. Removal of phosphorus using chemically modified lignocellulosic materials (2003)
838. A numerical simulation on the flow of watershed filtration reactors using lignocellulosic materials (2003)
839. Consumption climbs in central and eastern countries, stagnates in the west : markets for paper, paperboard and woodpulp, 2003-2004 (2004)
840. Deinking selectivity (Z-factor) : a new parameter to evaluate the performance of flotation deinking process (2005)
841. Tree-ring records of near-Younger Dryas time in central North America : preliminary results from the Lincoln Quarry site, central Illinois, USA (2004)
842. Velcro mechanics in wood (2003)
843. Oligocene mammals from Ethiopia and faunal exchange between Afro-Arabia and Eurasia (2003)
844. Removal of heavy metal ions from aqueous solutions using lignocellulosic fibers (2004)
845. Converting among log scaling methods : Scriber, International, and Doyle versus cubic (2004)
846. Azole-based antimycotic agents inhibit mold on unseasoned pine (2005)
847. Stress wave nondestructive evaluation of Douglas-fir peeler cores (2005)
848. Strength of small-diameter round and tapered bending members (2005)
849. Clear exterior finishes : finding the balance between aesthetics and durability (2004)
850. Finishes checklist : a guide to achieving optimum coating performance on exterior wood surfaces (2004)
851. A method countries can use to estimate changes in carbon stored in harvested wood products and the uncertainty of such estimates (2004)
852. The compression of wood/thermoplastic fiber mats during consolidation (2004)
853. Mycoblitz : beating the weather (2004)
854. Micro and colloidal stickie pacification with precipitated calcium carbonate (2002)
855. Durability of hardboard siding (2004)
856. Heat sterilization times of red pine boards (2004)
857. Estimating air-drying times of small-diameter ponderosa pine and Douglas-fir logs (2004)
858. Yield and ultrasonic modulus of elasticity of red maple veneer (2004)
859. Bacteria engineered for fuel ethanol production: current status (2003)
860. Study of injection molded microcellular polyamide-6 nanocomposites (2004)
861. Solution chemistry effects on orthophosphate adsorption by cationized solid wood residues (2004)
862. Cationized milled pine bark as an adsorbent for orthophosphate anions (2004)
863. Rapid analysis of the chemical composition of agricultural fibers using near infrared spectroscopy and pyrolysis molecular beam mass spectrometry (2004)
864. Phosphate adsorption on aluminum-impregnated mesoporous silicates : surface structure and behavior of adsorbents (2004)
865. Thermal properties of wood reacted with a phosphorus pentoxide–amine system (2004)
866. Rapid 2,2'-bicinchoninic-based xylanase assay compatible with high throughput screening (2003)
867. Solid residues from Ruminococcus cellulose fermentations as components of wood adhesive formulations (2003)
868. Tequila, slaughterhouse wastes and composting (2003)
869. Effect of moisture content on strength of CCA-treated lumber (1995)
870. Use of Excel ion exchange equilibrium solver with WinGEMS to model and predict NPE distribution in the Mead/Westvaco Evandale, TX, hardwood bleach plant (2003)
871. Leachability of boron from wood treated with natural and semi-synthetic polymers and calcium precipitating agent (2003)
872. Bibliography of FPL tropical forest utilization research–1910 to 1989 (1990)
873. Plywood manufacturing cost trends, excluding wood, in Western U.S. mills: 1975-1988 (1989)
874. National measures of forest productivity for timber (1989)
875. Chronicle of 65 years of wood finishing research at the Forest Products Laboratory (1989)
876. Crystallization behavior of polyamide-6 microcellular nanocomposites (2004)
877. Water decontamination (2004)
878. Evaluation of small-diameter ponderosa pine logs in bending (2004)
879. 3D engineered fiberboard : finite element analysis of a new building product  (2004)
880. Controlling adhesive behavior during recycling (2004)
881. Bonding of wood fiber composites using a synthetic chelator-lignin activation system (2004)
882. Summer temperatures of roof assemblies using western redcedar, wood-thermoplastic composite, or fiberglass shingles (2004)
883. Durability of yellow-poplar and sweetgum and service life of finishes after long-term exposure (2004)
884. Diameter effect on stress-wave evaluation of modulus of elasticity of logs (2004)
885. Surface chemistry changes of weathered HDPE/wood-flour composites studied by XPS and FTIR spectroscopy (2004)
886. Two-dimensional heat flow analysis applied to heat sterilization of ponderosa pine and Douglas-fir square timbers (2004)
887. Optimizing lodgepole pine submerchantable log thermomechanical pulp (2004)
888. Recommended protocols for sampling macrofungi (2004)
889. Inventories of woody residues and solid wood waste in the United States, 2002 (2004)
890. Mycena sect. Hygrocyboideae in the mountains of the Dominican Republic (2004)
891. Phosphate-bonded ceramic–wood composites : R&D project overview and invitation to participate (2004)
892. Isolation and purification of pyranose 2-oxidase from Phanerochaete chrysosporium and characterization of gene structure and regulation (2004)
893. Saccharomyces cerevisiae engineered for xylose metabolism exhibits a respiratory response (2004)
894. Improved grading system for structural logs for log homes (2004)
895. ASTM Committee D-7 : Wood : promoting safety and standardization for 100 years (2004)
896. Biodiversity of wood-inhabiting fungi in Israeli pine forests (2004)
897. Relationship between stress wave velocities of green and dry veneer (2004)
898. Fiberboards treated with NÂ’-N-(1, 8-Naphthalyl) hydroxylamine (NHA-Na), borax, and boric acid (2004)
899. Powder-driven-nail connections for round timber (2003)
900. Concepts in the development of new accelerated test methods for wood decay (2003)
901. Mechanism of cadmium ion removal by base treated juniper fiber (2003)
902. Basic studies on the pyrolysis of lignin compounds (2003)
903. Diameter effect on stress-wave evaluation of modulus of elasticity of logs (2003)
904. Transverse vibration technique to identify deteriorated wood floor systems (2002)
905. Forestry implications of agricultural short-rotation woody crops in the USA (2002)
906. Screw withdrawal : a means to evaluate densities of in-situ wood members (2003)
907. Progress in the development and optimization of polyoxometalate delignification systems (2002)
908. Delignification of high kappa number soda-ODiMAQ pulps with a polyoxometalate (2001)
909. Floor vibration : a possible assessment method for historic buildings (2001)
910. Recyclability of mixed office waste papers containing pressure sensitive adhesives and silicone release liners (2001)
911. Effects of weathering on color loss of natural fiber thermoplastic composites (2001)
912. Wood : adhesives (2001)
913. Progress in using hydroxymethylated resorcinol coupling agent to improve bond durability to wood (2001)
914. Fiber reinforced engineering plastics (2001)
915. Wood anatomy of Corynocarpaceae is consistent with Cucurbitalean placement (2001)
916. Future market scenarios for pulpwood supply from agricultural short-rotation woody crops (2000)
917. Results-driven approach to improving quality and productivity (2000)
918. Internal defect detection success story : industry taps into the Forest Products Laboratory's research capabilities-so can you (2000)
919. Quality control troubleshooting tools for the mill floor (2000)
920. Is it time to revisit the log-sort yard? (2000)
921. Faustmann and the forestry tradition of outcome-based performance measures (1999)
922. Stickie removal using neutral enzymatic repulping pressure screening (1998)
923. Properties of styrene-maleic anhydride copolymers containing wood-based fillers (1998)
924. Some relations among engineering constants of wood (1998)
925. Protection of Ochroma pyramidale from fungal decay with N,N-napthaloylhydroxylamine (1998)
926. Effect of fiberglass reinforcement on the behavior of bolted wood connections (1997)
927. An ultrasonic technique for predicting tensile strength of southern pine lumber (1997)
928. Chemical modification of lignocellulosics (1996)
929. Nondestructive evaluation of green wood using stress wave and transverse vibration techniques (1997)
930. Failure mechanisms in wood joints bonded with urea-formaldehyde adhesives  (1994)
931. Wood as an adherend (1991)
932. Heat release from wood wall assemblies using oxygen consumption method (1990)
933. How overdrying wood reduces its bonding to phenol-formaldehyde adhesives : a critical review of the literature. Part II, Chemical reactions (1991)
934. An empirical analysis of an innovative application for an underutilized resource: small-diameter roundwood in recreational buildings (2004)
935. FT–Raman investigation of bleaching of spruce thermomechanical pulp (2004)
936. Characterization of a multicopper oxidase gene cluster in Phanerochaete chrysosporium and evidence of altered splicing of the mco transcripts  (2004)
937. Differential stress-induced regulation of two quinone reductases in the brown rot Basidiomycete Gloeophyllum trabeum (2004)
938. Dimerization of A-[alpha]-[SiNb3W9O40]7- by pH-controlled formation of individual Nb−µ-O−Nb linkages (2003)
939. Durability of wood/plastic composites made from Parthenium species (2002)
940. Reaction of [rho]-hydroxycinnamyl alcohols with transition metal salts. 3, Preparation and NMR characterization of improved DHPS (2000)
941. Semiannual patents review, January-June 1999 (1999)
942. Semi-annual conference review January-June 2000 (2000)
943. Coagulation pretreatment for ultrafiltration of deinking effluents containing flexographic inks (1999)
944. Flexographic newspaper deinking : treatment of wash filtrate effluent by membrane technology (1999)
945. Removal of toxic heavy metal ions in runoffs by modified alfalfa and juniper (2000)
946. Hygrophoraceae of the Greater Antilles : Hygrocybe subgenus Hygrocybe (2000)
947. New and interesting ectomycorrhizal fungi from Puerto Rico, Mona, and Guana Islands (2000)
948. A provisional name for taxon of Phanerochaete from South Africa (2000)
949. Cuphophylluspegleri sp. nov. (Hygrophoraceae) from the Lesser Antilles (1999)
950. Seasoning small quantities of lumber (1965)
951. How overdrying wood reduces its bonding to phenol-formaldehyde adhesives : a critical review of the literature. Part I, Physical responses  (1990)
952. Carbohydrate modified phenol-formaldehyde resins (1986)
953. Dilute acid hydrolysis of paper birch : kinetics studies of xylan and acetyl-group hydrolysis (1985)
954. The effects of temperature and humidity on formaldehyde emission from UF-bonded boards : a literature critique (1985)
955. How mole ratio of UF resin affects formaldehyde emission and other properties : a literature critique (1984)
956. Effect of ventilation rate and board loading on formaldehyde concentration : a critical review of the literature (1984)
957. Formaldehyde emission from particleboard and plywood paneling : measurement, mechanism, and product standards (1983)
958. Emission of formaldehyde by particleboard : effect of ventilation rate and loading on air-contamination levels (1981)
959. Durability of adhesives in plywood (1976)
960. Confidence bounds for normal and lognormal distribution coefficients of variation (2003)
961. Effect of size on bending strength of wood members (1966)
962. Effect of knots on stress waves in lumber (1982)
963. Bending strength of shallow glued-laminated beams of a uniform grade (1981)
964. Accelerating the kiln drying of oak (1980)
965. Radio-frequency dielectric drying of short lengths of northern red oak (1980)
966. Wood anatomy of the neotropical Sapotaceae. XXIII, Gayella (1981)
967. Wood anatomy of the neotropical Sapotaceae. XXII, Pradosia (1981)
968. Does gang ripping hold the potential for higher clear cutting yields (1980)
969. Effect of cross grain on stress waves in lumber (1980)
970. Smoldering wave-front velocity in fiberboard (1980)
971. Fire development and wall endurance in sandwich and wood-frame structures (1980)
972. Lumber values from computerized simulation of hardwood log sawing (1980)
973. Morphology of pulp fiber from hardwoods and influence on paper strength (1978)
974. Survey of specific gravity of eight Maine conifers (1968)
975. Physical and mechanical properties of saligna eucalyptus grown in Hawaii (1965)
976. Effect of drying temperature on warp and downgrade of 2 by 4's from small-diameter ponderosa pine (2004)
977. Estimating the board foot to cubic foot ratio (2004)
978. Lam I-joists : a new structural building product from small-diameter, fire-prone timber (2003)
979. Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin (2004)
980. Water repellency and dimensional stability of wood (1985)
981. Best opening face system for sweepy, eccentric logs : a userÂ’s guide (1985)
982. Fiberboard and hardboard research at the Forest Products Laboratory : a 50-year summary (1985)
983. A computer program for analysis of fuelwood harvesting costs (1985)
984. Computer model for economic study of unbleached kraft paperboard production (1984)
985. Factors determining lumber recovery in sawmilling (1984)
986. CROMAX : a crosscut-first computer simulation program to determine cutting yield (1983)
987. Timber rivets in structural composite lumber (2004)
988. Use of wood energy for lumber drying and community heating in southeast Alaska (2004)
989. Review of end grain nail withdrawal research (2004)
990. Directory of wood-framed building deconstruction and reused wood building materials companies, 2004 (2004)
991. Response of Lutz, Sitka, and white spruce to attack by Dendroctonus rufipennis (Coleoptera: Scolytidae) and blue stain fungi (1994)
992. Oxygen index evaluation of fire-retardant-treated wood (1979)
993. Thermomechanical pulping of loblolly pine juvenile wood (2002)
994. Outlook for U.S. paper and paperboard sector and wood fiber supply in North America (2000)
995. Wood-framed building deconstruction : a source of lumber for construction? (2002)
996. Role of cation size in the energy of electron transfer to 1:1 polyoxometalate ion pairs {(M+)(Xn+VW11O40)}(8–n)–(M=Li, Na, K) (2000)
997. Ranking mechanical pulps for their potential to photoyellow (2000)
998. Wood-based panels : supply, trade and consumption (2000)
999. Above ground performance of preservative-treated western wood species (2000)
1000. Ignitability analysis using the cone calorimeter and lift apparatus (1996)
1001. Modelling the charring behaviour of structural lumber (1999)
1002. Method for evaluating toner adhesion on copier paper (2000)
1003. Highly efficient and stable catalyst for peroxynitrite decomposition (2001)
1004. Development of naphthenic acid fractionation with supercritical fluid extraction for use in wood decay testing (2000)
1005. Treatability of five Appalachian wood species with creosote and timbor® (2000)
1006. Plasma modification of sisal and high-density polyethylene composites : effect on mechanical properties (2000)
1007. Melt rheological properties of natural fiber-reinforced polypropylene (2000)
1008. Screening of fungi for soil remediation potential (1999)
1009. Extending fiber resources : fiber loading recycled fiber and mechanical pulps for lightweight, high opacity paper (1999)
1010. Lightweight, high-opacity Bible paper by fiber loading (2000)
1011. Biomechanical pulping of kenaf (1999)
1012. Enhanced wet air oxidation : synergistic rate acceleration upon effluent recirculation (2000)
1013. Synthesis, X-ray structure, and hydrolytic chemistry of the high potent antiviral polyniobotungstate A-[alpha]-[Si2Nb6W18O77]8– (1999)
1014. Polyoxometalate (POM) catalyst systems : chemical principles and reactions with lignin and oxygen  (2000)
1015. Nondestructive evaluation for sorting red maple logs (2000)
1016. Evaluation of physical changes in wood during colonization by Ceriporiopsis submervispora (2001)
1017. Development of USPS Laboratory and pilot-scale testing protocols  (2000)
1018. Best of both worlds : clear exterior finishes : in search of finishes that protect wood without hiding its natural beauty (2000)
1019. Miscellaneous wood structures (1999)
1020. The effect of release liner materials on adhesive contaminants, paper recycling and recycled paper properties (2000)
1021. Transcrystalline interphases in natural fiber-PP composites: effect of coupling agent (2000)
1022. Quantification of pressure sensitive adhesive, residual ink, and other colored process contaminants using dye and color image analysis (2000)
1023. Building codes : obstacle or opportunity? (1999)
1024. Influence of moisture absorption on mechanical properties of wood flour- polypropylene composites (2001)
1025. Wood-plastic composites in the United States : the interfacing of two industries (2002)
1026. Development and application of colorimetric microassay for determining boron-containing compounds (2002 )
1027. Accelerated cure of phenol-formaldehyde by the addition of cure accelerators : studies with model compounds (2000)
1028. Analysis of off-axis tension test of wood specimens (2002)
1029. Wood products : thermal degradation and fire (2001)
1030. Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature (2002)
1031. Laboratory tests on fungal resistance of wood filled polyethylene composites (2002)
1032. Photostabilization of wood flour filled HDPE composites (2002)
1033. U.S. fiber supply : steady and secure (2002)
1034. Correlation of adhesive strength with service life of paint applied to weathered wood (2002)
1035. Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models (2002)
1036. FT-Raman spectra of cellulose and lignocellulose materials : “self-absorption” phenomenon and its implications for quantitative work (2003)
1037. Accidental mold/termite testing of high density fiberboard (HDF) treated with borates and NÂ’N-naphthaloylhydroxylamine (NHA) (2003)
1038. Analysis of wood cantilever loaded at free end (2003)
1039. New taxa of Hawaiian corticioid fungi are described with keys to Crustoderma, Radulomyces, and Scopuloides (2003)
1040. Rolling your own : linear model hypothesis testing and power calculations via the singular value decomposition (2001)
1041. Finite element corroboration of buckling phenomena observed in corrugated boxes  (2003)
1042. Characteristics of ten tropical hardwoods from certified forests in Bolivia. Part II, Natural durability to decay fungi (2003)
1043. Emerging materials: what will durable materials look like in 2020? (2002)
1044. 3D engineered fiberboard : a new structural building product (2002)
1045. Properties and utilization of poplar wood (2001)
1046. Cone calorimeter testing of vegetation--an update (2002)
1047. Factors affecting the use of increment cores to assess fixation (2001)
1048. Efficacy of copper borax preservative against wood decay (2001)
1049. Home wreckers in search of moisture (2002)
1050. Mechanisms of protection by NHA against fungal decay (2002)
1051. Limiting conditions for decay in wood systems (2002)
1052. Effect of water repellent preservatives and other wood treatments on restoration and durability of millwork (2001)
1053. Semi-solid state bioremediation of CCA-treated wood using malted barley as a nutrient source (2002)
1054. Water-repellent preservative treatment of brick molding prior to factory priming improves paint service life (2001)
1055. Recyclable zein-coated kraft paper and linerboard (2002)
1056. Equilibrating metal-oxide cluster ensembles for oxidation reactions using oxygen in water (2001)
1057. Accelerated cure of phenol-formaldehyde resins : studies with model compounds (2002)
1058. Differential regulation of mnp2, a new manganese peroxidase-encoding gene from the ligninolytic fungus Trametes versicolor PRL 572 (2002)
1059. Surface chemistry and moisture sorption properties of wood coated with multifunctional alkoxysilanes by sol-gel process (2003)
1060. An inverse moisture diffusion algorithm for the determination of diffusion coefficient (2001)
1061. Significant levels of extracellular reactive oxygen species produced by brown rot basidiomycetes on cellulose (2002)
1062. Enzyme processes for pulp and paper : a review of recent developments (2003)
1063. Update for combustion properties of wood components (2002)
1064. Genetics and genomics in bioenergy and bioproducts (2003)
1065. Changing flux of xylose metabolites by altering expression of xylose reductase and xylitol dehydrogenase in recombinant Saccharomyces cerevisiae (2003)
1066. Molecular characterization of a gene for aldose reductase (CbXYL1) from Candida boidinii and its expression in Saccharomyces cerevisiae (2003)
1067. Lumber drying and heat sterilization research at the U.S. Forest Products Laboratory (2002)
1068. Kiln drying maple for structural uses (2002)
1069. Effect of drilled holes on the bending strength of large dimension Douglas-fir lumber (2003)
1070. Reaction-to-fire testing and modeling for wood products (2001)
1071. Effect of low relative humidity on properties of structural lumber products (2003)
1072. Mechanisms responsible for the effect of wet bulb depression on heat sterilization of slash pine lumber (2003)
1073. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites (2003)
1074. Utilization of treated conifer wood chips by Pleurotus (Fr.) P. Karst. species for cultivating mushrooms (2003)
1075. Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part III, Evaluation of full-size 2 by 4 lumber per ASTM Standard D 5664-95 Method C (2003)
1076. Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part II, Testing of small clear specimens per ASTM Standard D 5664-95, Methods A and B (2003)
1077. Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part I, Testing of Douglas-fir plywood per ASTM Standard D 5516-96 (2003)
1078. Copper tolerance of brown-rot fungi : time course of oxalic acid production (2003)
1079. Oxalic acid overproduction by copper-tolerant brown-rot basidiomycetes on southern yellow pine treated with copper-based preservatives (2003)
1080. Improvements to hydroxymethylated resorcinol coupling agent for durable bonding to wood (2003)
1081. Bending strength of Chilean radiata pine poles  (2003)
1082. Approaches to sampling macrofungi (2004)
1083. Cone calorimeter evaluation of wood products (2004)
1084. Microwaving logs for energy savings and improved paper properties for mechanical pulps  (2002)
1085. Moisture diffusion through a corrugated fiberboard under compressive loading : its deformation and stiffness response (2002)
1086. Hybrid composites : combining cellulose fibers and wollastonite mineral fibers into a nylon 6 matrix (2003)
1087. Electrochemical delignification of wood pulp using polyoxometalate mediators (2003)
1088. Reusing remediated CCA-treated wood (2003)
1089. Spectroscopic determination of anthraquinone in kraft pulping liquors using a membrane interface (2003)
1090. Determination of carboxyl groups in wood fibers by headspace gas chromatography (2003)
1091. Recent trends in preservative treatments for timber bridges (2004)
1092. Treated wood in transition : a look at CCA and the candidates to replace it (2004)
1093. The application of near infrared (NIR) spectroscopy to inorganic preservative-treated wood (2004)
1094. Correlating off-axis tension tests to shear modulus of wood-based panels  (2000)
1095. Migration of iron and manganese into CCA-treated wood in soil contact and the resulting error in leaching results when using energy dispersive x-ray fluorescence spectrometers (2003)
1096. Adhesive interactions with wood (2004)
1097. Scaled-up remediation of CCA-treated wood (2004)
1098. New technology in pulping and bleaching (2004)
1099. Chemical mechanism of fire retardance of boric acid on wood (2004)
1100. Improving the two-step remediation process for CCA-treated wood. Part II, Evaluating bacterial nutrient sources (2004)
1101. Improving the two-step remediation process for CCA-treated wood. Part I, Evaluating oxalic acid extraction (2004)
1102. Ultraviolet weathering of photostabilized wood-flour-filled high-density polyethylene composites (2003)
1103. A biopulping mechanism : creation of acid groups on fiber (2004)
1104. Fungal decay resistance of wood reacted with phosphorus pentoxide-amine system (2004)
1105. Evaluation of coupling agents to manufacture hybrid hardboard made from industrial waste fiberglass and wood fiber (2004)
1106. Predictor sort sampling and one-sided confidence bounds on quantiles (2002)
1107. BF into cubic meters (2002)
1108. New environmentally-benign concepts in wood protection: the combination of organic biocides and non-biocidal additives (2003)
1109. Synchrotron applications in wood preservation and deterioration (2003)
1110. Detecting decay fungi with antibody-based tests and immunoassays (2003)
1111. The effect on biological and moisture resistance of epichlorohydrin chemically modified wood  (2002)
1112. Oxidation catalysis by polyoxometalates fundamental electron-transfer phenomena (2002 )
1113. Alternative technologies for water quality management (2002)
1114. Novel bleaching of thermomechanical pulp for improved paper properties (2002)
1115. Potential sulfur-free pulping methods (2002)
1116. Small-diameter success stories (2004)
1117. Urban tree and woody yard residues : another wood resource (2003)
1118. Profile 2003: softwood sawmills in the United States and Canada (2003)
1119. Heat sterilization time of ponderosa pine and Douglas-fir boards and square timbers (2003)
1120. Field performance testing of improved engineered wood fiber surfaces for accessible playground areas (2003)
1121. Mechanical properties of wood fiber composites under the influence of temperature and humidity (2003)
1122. Influence of natural fibers on the phase transitions in high-density polyethylene composites using dynamic mechanical analysis (2003)
1123. Impact toughness of cellulose-fiber reinforced polypropylene : influence of microstructure in laminates and injection molded composites (2003)
1124. Effect of processing method on accelerated weathering of wood-flour/HDPE composites (2003)
1125. Combined ultraviolet and water exposure as a preconditioning method in laboratory fungal durability testing (2003)
1126. Applications of nanocomposites and woodfiber plastics for microcellular injection molding (2003)
1127. Raman microprobe analysis of single ramie fiber during mercerization (2003)
1128. Aging of printing and writing paper upon exposure to light. Part 2, Mechanical and chemical properties (2003)
1129. Characterization and reactions of a Salix extractive with a unique ring system (2003)
1130. In situ quantitation of ring-conjugated ethylenic lignin-units in spruce thermomechanical pulps by FT-Raman spectroscopy (2003)
1131. Understanding wood chemistry changes during biopulping (2003)
1132. Kinetic analysis of polyoxometalate (POM) oxidation of non-phenolic lignin model compound (2003)
1133. An improved 13C-tracer method for the study of lignin structure and reactions : differential 13C-NMR (2003)
1134. Pulp extrusion at ultra-high consistencies : selection of water soluble polymers for process optimization (2002)
1135. Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project (2002)
1136. Potential of chicken feather fibre in wood MDF composites (2003)
1137. 3D engineered fiberboard : engineering analysis of a new building product (2003)
1138. Comparison of postbuckling model and finite element model with compression strength of corrugated boxes (2002)
1139. Timber bridge evaluation : a global nondestructive approach using impact generated FRFs (2002)
1140. Using kinetic models to predict thermal degradation of fire-retardant-treated plywood roof sheathing (2003)
1141. Durability of structural lumber products at high temperatures. Part I, 66C at 75% RH and 82C at 30% RH (2003)
1142. Phellinus coronadensis : a new species from southern Arizona, USA (2003)
1143. Bilinear modelling of cellulosic orthotropic nonlinear materials (2003)
1144. Accelerated weathering of wood surfaces coated with multifunctional allkoxysilanes by sol-gel deposition (2003)
1145. Decay and termite resistance of medium density fiberboard (MDF) made from different wood species  (2003)
1146. Achievements in the utilization of poplarwood : guideposts for the future (2001)
1147. Accelerated detection of brown-rot decay : comparison of soil block test, chemical analysis, mechanical properties, and immunodetection (2003)
1148. Effect of simulated rainfall and weathering on release of preservative elements from CCA treated wood (2003)
1149. A novel extracellular multicopper oxidase from Phanerochaete chrysosporium with ferroxidase activity (2003)
1150. Effects of uneven-aged and diameter-limit management on West Virginia tree and wood quality (2004)
1151. Dry kiln operator's manual (1991)
1152. Wood-based composites and panel products  (1999)
1153. Wood preservation (1999)
1154. Use of wood in buildings and bridges (1999)
1155. Structure of wood (1999)
1156. Structural analysis equations (1999)
1157. Specialty treatments (1999)
1158. Round timbers and ties (1999)
1159. Physical properties and moisture relations of wood (1999)
1160. Mechanical properties of wood (1999)
1161. Lumber stress grades and design properties (1999)
1162. Glued structural members (1999)
1163. Fire safety (1999)
1164. Finishing of wood (1999)
1165. Fastenings (1999)
1166. Drying and control of moisture content and dimensional changes (1999)
1167. Commercial lumber (1999)
1168. Characteristics and availability of commercially important woods (1999)
1169. Biodeterioration of wood (1999)
1170. Adhesive bonding of wood materials (1999)
1171. Energy from wood (2004)
1172. Polyoxometalate oxidation of non-phenolic lignin subunits in water : effect of substrate structure on reaction kinetics (2004)
1173. Considerations in recycling of wood-plastic composites (2004)
1174. Effect of processing method on surface and weathering characteristics of wood-flour/HDPE composites (2004)
1175. Chemical modification (2004)
1176. Efficacy of didecyl dimethyl ammonium chloride (DDAC), disodium octaborate tetrahydrate (DOT), and chlorothalonil (CTL) against common mold fungi (2004)
1177. Woody residues and solid waste wood available for recovery in the United States, 2002 (2004)
1178. Genome sequence of the lignocellulose degrading fungus Phanerochaete chrysosporium strain RP78 (2004)
1179. Collecting and describing macrofungi (2004)
1180. Growth and fermentation responses of Phanerochaete chrysosporium to O2 limitation (2004)
1181. Stoichiometric network constraints on xylose metabolism by recombinant Saccharomyces cerevisiae (2004)
1182. Metabolic engineering for improved fermentation of pentoses by yeasts (2004)
1183. Fiber resources (2004)
1184. Macrofungi on woody substrata (2004)
1185. Recovering wood for reuse and recycling : a United States perspective (2004)
1186. Messenger RNA transcripts (2004)
1187. Dynamic mechanical analysis of compatibilizer effect on the mechanical properties of wood flour/high-density polyethylene composites (2004)
1188. Evaluating the natural durability of native and tropical wood species against Reticulitermes flavipes (2004)
1189. Multicomponent biocide systems protect wood from decay fungi, mold fungi, and termites for interior applications (2004)
1190. Fundamentals of composite processing : proceedings of a workshop : November 5-6, 2003, Madison, WI. (2004)
1191. Variability in evaluating environmental impacts of treated wood. (2004)
1192. Timber rivet connections in US domestic species (2004)
1193. Alternatives to chromated copper arsenate for residential construction (2004)
1194. Polycyclic aromatic hydrocarbon migration from creosote-treated railway ties into ballast and adjacent wetlands (2004)
1195. Long-term performance monitoring of hardwood timber bridges in Pennsylvania (2004)
1196. Estimating air drying times of lumber with multiple regression (2004)
1197. U.S. forest products annual market review and prospects, 2001-2004 (2004)
1198. Design of a hydraulic bending machine (2004)
1199. Assessment of decay in standing timber using stress wave timing nondestructive evaluation tools : a guide for use and interpretation (2004)
1200. Diagnostic guide for evaluating surface distortions in veneered furniture and cabinetry (2004)
1201. Analysis of three microscopic characters for separating the wood of Pinus contorta and P. ponderosa (2003)
1202. Commercialization of biopulping: an energy-saving and environmentally-friendly technology for the paper industry (2003)
1203. Oxalic acid pretreatment for mechanical pulping greatly improves paper strength while maintaining scattering power and reducing shives and triglycerides (2003)
1204. An evaluation of the use of near infrared (NIR) spectroscopy to identify water and oil-borne preservatives (2003)
1205. Synthesis of pulping processes with fiber loading methods for lightweight papers (2003)
1206. Modification of lignocellulosic materials by laccase (2003)
1207. Progress in the development and optimization of polyoxometalate delignification systems (2003)
1208. Fire resistance of exposed wood members (2004)
1209. Stress wave sorting of red maple logs for structural quality (2004)
1210. Effects of backing board materials on wood combustion performance (2004)
1211. Ignitability of materials in transitional heating regimes (2004)
1212. Micrandra inundata (Euphorbiaceae), a new species with unusual wood anatomy from black-water river banks in southern Venezuela (2004)
1213. Projecting recovered paper supply in the United States. (2002)
1214. Projections of shifts in US Forest Products produced, imported, and exported and sources of roundwood and other fiber used to make them. (2002)
1215. Impact of U.S. forest products consumption, imports, and exports on foreign timber harvests. (2001)
1216. Molecular characterization of the Hansenula polymorpha FLD1 gene encoding formaldehyde dehydrogenase. (2002)
1217. Characterization of wood decay enzymes by MALDI-MS for post-translational modification and gene identification. (2002)
1218. Laboratory studies of CCA-C leaching : influence of wood and soil properties on extent of arsenic and copper depletion. (2002)
1219. Nondestructive evaluation of oriented strand board exposed to decay fungi. (2002)
1220. Micromechanical measurement of wood substructure properties. (2002)
1221. Projections of the U.S. timber supply and demand situation to 2050 : draft findings from the USDA Forest Service 2000 RPA Timber Assessment. (2001)
1222. Pulpwood supply and demand : development in the South, little growth elsewhere. (2002)
1223. Alternatives to chromated copper arsenate (CCA) for residential construction. (2004)
1224. Variability in evaluating environmental impacts of treated wood. (2004)
1225. Bioremediation and degradation of CCA-treated wood waste. (2004)
1226. Pest risk assessment of the importation into the United States of unprocessed logs and chips of eighteen Eucalypt species from Australia. (2003)
1227. Effects of processing method and moisture history on laboratory fungal resistance of wood-HDPE composites. (2004)
1228. Rate of CCA leaching from commercially treated decking. (2004)
1229. Conversion of conifer wastes into edible and medicinal mushrooms. (2004)
1230. Effects of inorganic ions on leachability of wood preserving N'N-hydroxynapthalimide (NHA). (2004)
1231. FPL-PELPS : a price endogenous linear programming system for economic modeling, supplement to PELPS III, version 1.1. (2003)
1232. Estimating air drying times of small-diameter ponderosa pine and Douglas-fir logs. (2003)
1233. Challenges in converting among log scaling methods. (2003)
1234. Fire resistance of engineered wood rim board products. (2003)
1235. Confidence intervals for predicting lumber strength properties based on ratios of percentiles from two Weibull populations. (2003)
1236. Evaluating wood-based composites for incipient fungal decay with the immunodiagnostic wood decay test. (2003)
1237. Small-diameter trees used for chemithermomechanical pulps. (2003)
1238. Structural wood products in onshore buildings at Naval Station Norfolk, 2000. (2003)
1239. Pulp capacity in the United States, 2000.  (2003)
1240. Developing and commercializing sustainable new wood products : a process for identifying viable products.  (2003)
1241. Improving engineered wood fiber surfaces for accessible playgrounds.  (2003)
1242. Creosote retention levels of timber highway bridge superstructures in MichiganÂ’s Lower Peninsula. (2003)
1243. Flexural properties of laminated veneer lumber manufactured from ultrasonically rated red maple veneer : a pilot study.  (2003)
1244. Long-term soil accumulation of chromium, copper, and arsenic adjacent to preservative-treated wood. (2004)
1245. Predicting the hydroxymethylation rate of phenols with formaldehyde by molecular orbital calculation. (2002)
1246. Bark beetles and fungal associates colonizing white spruce in the Great Lakes region. (2002)
1247. Semiannual patents review, January — June 2001. (2001)
1248. Formation, isomerization, and derivatization of keggin tungstoaluminates. (2001)
1249. Reaction of formaldehyde at the ortho- and para-positions of phenol: exploration of mechanisms using computational chemistry. (2001)
1250. Predicting the reactivity of phenolic compounds with formaldehyde. II, continuation of an ab initio study. (2002)
1251. Reaction of formaldehyde with phenols: a computational chemistry study. (2001)
1252. Effect of wet-dry cycling on the decay properties of aspen fiber high-density polypropylene composites. (2002)
1253. High fiber-low matrix composites: kenaf fiber/polypropylene. (2002)
1254. Alternative projections of the impacts of private investment on southern forests: a comparison of two large-scale forest sector models of the United States. (2001)
1255. Pulp extrusion for recycling wastepapers and paper mill sludges  (2000)
1256. Forest products research in IUFRO history and potential  (1999)
1257. Wood products utilization : a call for reflection and innovation  (1999)
1258. The next century of wood products utilization : a call for reflection and innovation  (1999)
1259. Space-frame connection for small-diameter round timber  (2000)
1260. Dowel-nut connection in Douglas-fir peeler cores  ()
1261. Small-diameter log evaluation for value-added structural applications  (2000)
1262. Research challenges for structural use of small-diameter round timbers  (2000)
1263. Full field stress/strain analysis : use of Moire and TSA for wood structural assemblies  (1994)
1264. Evaluation and field load testing of timber railroad bridge  (2000)
1265. Feasibility of fiberglass-reinforced bolted wood connections  ()
1266. Thermal degradation of fire-retardant -treated wood : predicting residual service life  (2001)
1267. Serviceability modeling : predicting and extending the useful service life of FRT-plywood roof sheathing  (2000)
1268. Roof temperatures in simulated attics  ()
1269. Predicting bending strength of fire-retardant-treated plywood from screw-withdrawal tests  ()
1270. Modeling strength loss in wood by chemical composition. Part I, An individual component model for southern pine  (2001)
1271. Wood properties affecting finish service life  (2000)
1272. Water repellents and water-repellent preservatives for wood  (1999)
1273. Selection and application of exterior stains for wood  (1999)
1274. Restoration of severely weathered wood  (2000)
1275. Evaluation of several finishes on severely weathered wood  (1999)
1276. Erosion rates of wood during natural weathering. Part III, Effect of exposure angle on erosion rate  (2001)
1277. Erosion rates of wood during natural weathering. Part II, Earlywood and latewood erosion rates  (2001)
1278. Erosion rates of wood during natural weathering. Part I, Effects of grain angle and surface texture  (2001)
1279. Fire endurance research at the Forest Products Laboratory  (1990)
1280. Comparison of test protocols for standard room/corner tests  (1998)
1281. Improvements In solar dry kiln design (1971)
1282. Nondestructive methods of evaluating quality of wood in preservative-treated piles  (2000)
1283. Nondestructive evaluation of potential quality of creosote-treated piles removed from service  (2001)
1284. Volatile organic compound hot-press emissions from southern pine furnish as a function of adhesive type  (1999)
1285. Field performance of timber bridges. 17, Ciphers stress-laminated deck bridge  ()
1286. Field performance of timber bridges. 12, Christian Hollow stress-laminated box-beam bridge  ()
1287. Field performance of timber bridges. 11, Spearfish Creek stress-laminated box-beam bridge  ()
1288. Field performance of timber bridges. 8, Lynches Woods Park stress-laminated deck bridge  ()
1289. Field performance of timber bridges. 4, Graves Crossing stress-laminated deck bridge  ()
1290. Durability of one-part polyurethane bonds to wood improved by HMR coupling agent  (2000)
1291. Strength and durability of one-part polyurethane adhesive bonds to wood  (1998)
1292. TT : a program that implements predictor sort design and analysis  (1997)
1293. Predictor sort sampling, tight t`s, and the analysis of covariance : theory, tables, and examples  ()
1294. Transcript patterns of Phanerochaete chrysosporium genes in organopollutant contaminated soils and in wood  (1998)
1295. Oxalate metabolism in liquid cultures of Ceriporiopsis subvermispora : a possible pathway for extracellular H2O2 production  (1998)
1296. Kinetics of Mn3+-oxalate formation and decay in reactions catalyzed by manganese peroxidase of Ceriporiopsis subvermispora  (1998)
1297. Ultrafiltrative deinking of flexographic ONP : the role of surfactants  (1999)
1298. Correlation of water vapor adsorption behavior of wood with surface thermodynamic properties  (1999)
1299. FPL design for lumber dry kiln using solar/wood energy in tropical latitudes  (1985)
1300. Wall and corner fire tests on selected wood products  (1991)
1301. Simulating wall and corner fire tests on wood products with the OSU room fire model  (1994)
1302. Room fire test for fire growth modeling : a sensitivity study  (1989)
1303. Burning rate of solid wood measured in a heat release rate calorimeter  (1992)
1304. Air pressures in wood frame walls  (1998)
1305. FPL roof temperature and moisture model : description and verification  ()
1306. Value-added mechanical pulps for light weight, high opacity paper  (1998)
1307. Semiannual patents review, January-June 1998  (1998)
1308. Purdue Plane Structures Analyzer II : a computerized wood engineering system  (1984)
1309. Semiannual patents review, July-December 1998  (1999)
1310. Organization and differential regulation of a cluster of lignin peroxidase genes of Phanerochaete chrysosporium  (1999)
1311. A homokaryotic derivative of a Phanerochaete chrysosporium strain and its use in genomic analysis of repetitive elements  (2000)
1312. Regional softwood sawmill processing variables as influenced by productive capacity  ()
1313. Heat release rate of wood-plastic composites  (1997)
1314. Simplified analysis of timber rivet connections  (2000)
1315. 2-deoxyglucose as a selective agent for derepressed mutants of Pichia stipitis  (1998)
1316. Delignification of wood and kraft pulp with polyoxometalates  (1998)
1317. Should whole-tree chips for fuel be dried before storage?  (1979)
1318. Doit-On Secher Avant Stockage Les Plaquettes D`Arbres Entiers Destinees Au Chauffage (1980)
1319. Where to cut, where to run : prospects for U.S. South softwood timber supplies and prices  (1999)
1320. Veneer producers can cope with cost-price squeeze  (1999)
1321. Sawmill closures, openings, and net capacity changes in the softwood lumber sector, 1996-2003 [electronic resource]  ()
1322. Profile 1999 : softwood sawmills in the United States and Canada  ()
1323. Efficacy of curtailment announcements as a predictor of lumber supply  (2001)
1324. Wood usage trends in the furniture and fixtures industry  (1978)
1325. Review of wood-based panel sector in United States and Canada  (1997)
1326. A profile of wood use in nonresidential building construction  ()
1327. A profile of the nonresidential nonbuilding construction market for lumber and plywood  ()
1328. Repair of white oak glued-laminated beams  (1999)
1329. Analysis of continuous beams with joint slip  (1981)
1330. Trends in economic scarcity of U.S. timber commodities  ()
1331. Relationship between longitudinal stress wave transit time and moisture content of lumber during kiln-drying  (2001)
1332. Method for estimating air-drying times of lumber  (2001)
1333. Method for adjusting warp measurements to a different board dimension  (2000)
1334. Effect of wet bulb depression on heat sterilization time of slash pine lumber  ()
1335. Effect of moisture content on warp in hardwood 2 by 6`s for structural use  ()
1336. Specific gravity, moisture content, and density relationship for wood  (1993)
1337. Equilibrium moisture content of wood in outdoor locations in the United States and worldwide  (1998)
1338. Effect of air velocity on the drying rate of single eastern white pine boards  (1997)
1339. Accelerating oak air drying by presurfacing (1972)
1340. Inadequate redrying linked to dimensional instability of CCA-treated southern pine lumber  (2001)
1341. Disruption of the cytochrome c gene in xylose-utilizing yeast Pichia stipitis leads to higher ethanol production  (1999)
1342. Performance of wood in a do-it-yourself solar collector  (1979)
1343. FPL designs meet family housing needs. ()
1344. Environmentally benign USPS stamps : baseline pilot recycling results  (1998)
1345. Incorporating biopulping technology into wood yard operations  (1998)
1346. Rheology and extrusion of low-grade paper and sludge  (1999)
1347. Nonlinear programming models to optimize uneven-aged loblolly pine management  (1999)
1348. SouthPro : a computer program for managing uneven-aged loblolly pine stands  (1998)
1349. Comparisons of interlaboratory swellometer testing of two water-repellent preservative formulations for millwork  (2002)
1350. Structural fire design : wood  ()
1351. Strength validation and fire endurance of glued-laminated timber beams  ()
1352. A simplified test for adhesive behavior in wood sections exposed to fire  (1968)
1353. Stress wave techniques for determining quality of dimensional lumber from switch ties  (1995)
1354. Measuring the triaxial load-deformation response of orthotropic materials subjected to large and small strain regimes  (1998)
1355. Properties of kenaf/polypropylene composites  (1999)
1356. Changes in kenaf properties and chemistry as a function of growing time  (1999)
1357. Protecting log cabins from decay  (1977)
1358. Dimensional Stabilization of Wood In Use (1981)
1359. Inspection of timber bridges using stress wave timing nondestructive evaluation tools : a guide for use and interpretation  (1999)
1360. Stress wave timing nondestructive evaluation tools for inspecting historic structures : a guide for use and interpretation. (2000)
1361. Nondestructive testing for assessing wood members in structures : a review  (1994)
1362. Plans for crash-tested wood bridge railings for concrete decks  (1998)
1363. Plans for crash-tested bridge railings for longitudinal wood decks on low-volume roads  (1998)
1364. Crashworthy railing for timber bridges  (1999)
1365. Summary of U.S. research on wood transportation structures  (1996)
1366. Research accomplishments for wood transportation structures based on a national research needs assessment  (1998)
1367. Plans for crash-tested bridge railings for longitudinal wood decks  (1995)
1368. Field performance of timber bridges. 6, Hoffman Run stress-laminated deck bridge  ()
1369. Field performance of stress-laminated timber bridges on low-volume roads  (1995)
1370. News and views of this kiln-drying business : a calendar for air-drying lumber in the upper Midwest  (1972)
1371. Wood products used in constructing conservation and development projects by the Corps of Engineers in the United States, 1962 and 1978  ()
1372. Evaluation of recycled timber members  (1999)
1373. Structural reliability of plank decks  (1999)
1374. Contributions to the study of gasteromycetes of Puerto Rico  (1998)
1375. Preliminary investigation on the natural durability of guayule (Parthenium argentatum) based wood products  (2000)
1376. Diversity of lignicolous basidiomycetes in coarse woody debris  (1993)
1377. Commentary on factors affecting transverse vibration using an idealized theoretical equation  (2000)
1378. Transverse vibration of a simply supported beam with symmetric overhang of arbitrary length  (1997)
1379. How To Refinish Wood Siding With Latex Paints (1976)
1380. Protecting wood decks from biodegradation and weathering : evaluation of deck finish systems  (2001)
1381. T-section glulam timber bridge modules : modeling and performance  (1999)
1382. Xylaria at the Forest Products Laboratory : past, present, and future  (1999)
1383. Rate- and duration-of-load behavior of lab-made structural flakeboards  (1985)
1384. Wood-based panel plant locations and timber availability in selected U.S. states  (1998)
1385. How woody residuals are recycled in the United States  (1999)
1386. Executive summary. (1997)
1387. Wood used in pallets manufactured in the United States, 1982  ()
1388. Wood products used for residential repair and remodeling in the United States, 1991  ()
1389. Value of timber and agricultural products in the United States, 1991  (1996)
1390. The softwood plywood industry in the United States, 1965-82  ()
1391. Effect of moisture content on dowel-bearing strength  (2001)
1392. Experimental shear strength of unchecked solid-sawn Douglas-fir  ()
1393. Solution state NMR of lignins  (1999)
1394. Incorporation of hydroxy-cinnamaldehydes into lignins  (1999)
1395. Adhesive in the buckling failure of corrugated fiberboard : a finite element investigation  (1998)
1396. An assessment of the common carrier shipping environment  (1979)
1397. Simplified method for calculating shear deflections of beams. (1970)
1398. Modeling drying of three-dimensional pulp molded structures. Part I, Experimental program  (1998)
1399. Shear test fixture design for orthotropic materials  (2000)
1400. An inverse moisture diffusion algorithm for the determination of diffusion coefficient  (2000)
1401. Effects of shear coupling on shear properties of wood  (2000)
1402. Growth model for uneven-aged loblolly pine stands : simulations and management implications  (1998)
1403. Sawmill simulation and the best opening face system : a user`s guide  (1985)
1404. Exploring the uses for small-diameter trees  (2001)
1405. The role of boron in flame-retardant treatments  (1990)
1406. Effectiveness of fire-retardant treatments for shingles after 10 years of outdoor weathering  ()
1407. Effects of phosphoramides on wood dimensional stability  (2000)
1408. Oil sorption by lignocellulosic fibers  (1999)
1409. Role of construction debris in release of copper, chromium, and arsenic from treated wood structures  ()
1410. Environmental impact of preservative-treated wood in a wetland boardwalk. ()
1411. Effect of prestain on the release rate of copper, chromium, and arsenic from western hemlock  (1999)
1412. Effect of fire-retardant treatment on plywood pH and the relationship of pH to strength properties  (1999)
1413. Leaching of wood preservative components and their mobility in the environment : summary of pertinent literature  (1996)
1414. Unitizing goods on pallets and slipsheets  (1986)
1415. Lumber and panel products consumption for packaging and shipping in the United States, perspective for the 1980`s  ()
1416. Cost function approach for estimating derived demand for composite wood products  (1991)
1417. Creep and creep-rupture behaviour of wood-based structural panels  ()
1418. Sectioning Refractory Woods for Anatomical Studies. (1977)
1419. Medium density fiberboard made from Eucalyptus saligna  (2001)
1420. Medium density fiberboards from plantation grown Eucalyptus saligna  (1999)
1421. Structural lumber properties of hybrid poplar  ()
1422. Monitoring of visually graded structural lumber  ()
1423. Mechanical grading of oak timbers  (1999)
1424. There`s a right way to buy exterior house paint and this is the season for it  (1998)
1425. Reduction of greenhouse gases by fiber-loaded lightweight, high-opacity newsprint production  (1999)
1426. Lightweight, high-opacity paper : process costs and energy use reduction  (1999)
1427. Engineering analysis of lightweight high-opacity newsprint production by fiber loading  (1999)
1428. Effects of incising on treatability and leachability of CCA-C-treated eastern hemlock  (2002)
1429. Effect of compression wood on leaching of chromium, copper, and arsenic from CCA-C treated red pine (Pinus resinosa Ait.)  (2000)
1430. Peroxyl radicals are potential agents of lignin biodegradation  (1999)
1431. Field performance of timber bridges. 16, North Siwell Road stress-laminated bridge  ()
1432. Field performance of timber bridges. 9, Big Erick`s stress-laminated deck bridge  ()
1433. Some bivariate distributions for modeling the strength properties of lumber  ()
1434. Nonparametric Bayesian predictive distributions for future order statistics  (1999)
1435. Marine exposure of preservative-treated small wood panels  (1984)
1436. Mechanisms for kappa reduction and color removal by xylanases  (1998)
1437. Genetic engineering of Pichia stipitis for fermentation of xylose  (1998)
1438. Ethanol and thermotolerance in the bioconversion of xylose by yeasts  (2000)
1439. Data reduction of room tests for zone model validation  (1992)
1440. Efficient utilization of red maple lumber in glued-laminated timber beams ()
1441. A microwave method for measuring moisture content, density, and grain angle of wood  (1985)
1442. Use and production of solid sawn timbers in the United States  (2001)
1443. United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1996  (1999)
1444. United States paper, paperboard, and market pulp capacity trends by process and location, 1970-2000  ()
1445. Industrial wood productivity in the United States, 1900-1998  (2000)
1446. Global cycle changes the rules for U.S. pulp and paper  (1999)
1447. Recovery of paper and wood for recycling : actual and potential  (1995)
1448. Multivariate stochastic simulation with subjective multivariate normal distributions  (1991)
1449. How to estimate recoverable heat energy in wood or bark fuels  (1979)
1450. Bioprocessing preservative-treated waste wood  (2000)
1451. High resolution microtomography for density and spatial infomation about wood structures  (1999)
1452. Termite and fungal resistance of in situ polymerized tributyltin acrylate and acetylated Indonesian and USA wood  (2000)
1453. Modelling the drying of three-dimensional pulp moulded structures. Part II, Drying data obtained from flat panels using virgin and recycled paper fibre  (1999)
1454. Know your fibers : process and properties, or, a material science approach to designing pulp molded products  (1998)
1455. Strength and processing properties of wet-formed hardboards from recycled corrugated containers and commercial hardboard fibers  (1999)
1456. U.S. Timber production, trade, consumption, and price statistics 1965-1997 (1999)
1457. What factors control dimerization of coniferyl alcohol?  (1999)
1458. Closed-mill delignification by design using polyoxometalates  (1999)
1459. Knock on wood : real recycling opportunities are opening up  (1999)
1460. Field performance of timber bridges. 15, Pueblo County, Colorado, stress-laminated deck bridge  ()
1461. Field performance of timber bridges. 7, Connell Lake stress-laminated deck bridge  ()
1462. Standard plans for southern pine bridges  (1995)
1463. Field performance of timber bridges. 13, Mohawk Canal stress-laminated bridge  ()
1464. Field performance of timber bridges. 14, Dean, Hibbsville, and Decatur stress-laminated deck bridges  ()
1465. Field performance of timber bridges. 10, Sanborn Brook stress-laminated deck bridge  ()
1466. Control of wood decay by Trichoderma (Gliocladium virens. I, Antagonistic properties  (1997)
1467. Strength and stiffness of reinforced yellow-poplar glued-laminated beams  ()
1468. Fiber stress values for design of glulam timber utility structures  ()
1469. Payback as an investment criterion for sawmill improvement projects (1983)
1470. Modifying sales summaries can aid forest products industries  (1976)
1471. Uses for Sawdust, Shavings, And Waste Chips (1969)
1472. Bark And Its Possible Uses (1971)
1473. Validity of plant fiber length measurement : a review of fiber length measurement based on kenaf as a model  (1999)
1474. Stormwater filtration of toxic heavy metal ions using lignocellulosic materials selection process, fiberization, chemical modification, and mat formation  (1999)
1475. Stormwater filtration of a municipal detention pond  (1999)
1476. Properties of kenaf from various cultivars, growth and pulping conditions  (1999)
1477. Determining the minimum conditions for soda-anthraquinone pulping of kenaf bast, core, and whole stalk fibers  (1999)
1478. A look at yellow-poplar for studs  (1977)
1479. Performance of a Press-Lam bridge : a 5-year load-testing and monitoring program  (1985)
1480. A comparative study of wood highway sound barriers  (2002)
1481. Production of polygalacturonase and increase of longitudinal gas permeability in southern pine by brown-rot and white-rot fungi  (1999)
1482. Inhibition of termite damage by N`N-napthaloylhydroxyamine (NHA) : Reticulotermes flavipes (Kollar) vs. Coptotermes formosanus Shiraki  (2000)
1483. Inhibition of decay fungi using cotton cellulose hydrolysis as a model for wood decay  (2000)
1484. Effect of heart checks on flexural properties of reclaimed 6 by 8 Douglas-fir timbers  (2001)
1485. Codes and standards for structural wood products and their use in the United States  (1998)
1486. Western hardwoods : value-added research and demonstration program  (1995)
1487. Linking log quality with product performance  (1997)
1488. Dimension yields from yellow-poplar lumber  (1984)
1489. Nonlinear finite element modeling of corrugated board  (1999)
1490. Bending creep and load duration of Douglas-fir 2 by 4s under constant load for up to 12-plus years  (2000)
1491. Flakeboard thickness swelling. Part II, Fundamental response of board properties to steam injection pressing  (1999)
1492. Flakeboard thickness swelling. Part I, Stress relaxation in a flakeboard mat  (1998)
1493. Machine grading of lumber : practical concerns for lumber producers  (2000)
1494. Design criteria for portable timber bridge systems : static versus dynamic loads  (1999)
1495. Wood handbook : wood as an engineering material. (1999)
1496. Recycling research progress at the Forest Products Laboratory. (1995)
1497. Forest Products Laboratory research program on small-diameter material. (2000)
1498. Comparative Decay Resistance of Heartwood of Native Species (1967)
1499. Air drying of lumber. (1999)
1500. The role of water repellents and chemicals in controlling mildew on wood exposed outdoors  (1984)
1501. Two test level 4 bridge railing and transition systems for transverse timber deck bridges  (2000)
1502. Railing systems for use on timber deck bridges  (1999)
1503. Stress grading of recycled lumber and timber  (1999)
1504. Performance of fasteners in wood flour-thermoplastic composite panels  (2001)
1505. Engineering evaluation of 55-year-old timber columns recycled from an industrial military building  (2000)
1506. Effects of weathering on color loss of natural fiber : thermoplastic composites  (2000)
1507. Evaluation of lumber recycled from an industrial military building  (1999)
1508. Wood-framed building deconstruction : a source of lumber for construction?  (2002)
1509. Juvenile wood effect in red alder : analysis of physical and mechanical data to delineate juvenile and mature wood zones  (2000)
1510. Geotextiles : a specific application of biofibers  (1995)
1511. Reliability-based criteria for load and resistance factor design code for wood bridges  (2000)
1512. Wood in transportation program-- an overview  (2000)
1513. Quantification of micro stickies  (1997)
1514. Correlation of smoke development in room tests with cone calorimeter data for wood products  (2000)
1515. Analytical model of flame spread in full-scale room/corner tests (ISO9705)  (1999)
1516. Room/corner tests of wall linings with 100/300 kW burner  (1995)
1517. Lumber use trends in mobile home construction  (1977)
1518. Drying hardwood lumber  (2000)
1519. Soil-contact decay tests using small blocks : a procedural analysis  ()
1520. Increment cores : how to collect, handle, and use them  ()
1521. Evaluation of mixed hardwood studs manufactured by the Saw-Dry-Rip (SDR) process  (1985)
1522. Sawtooth forces in cutting tropical hardwoods native to South America  ()
1523. Natural decay resistance of heartwood from dead, standing yellow-cedar trees : laboratory evaluations  (2000)
1524. Five-year field trials using preservative-treated, second-growth Douglas-fir exposed in ground contact in Australia  (2000)
1525. Distribution of borates around point source injections in wood members exposed outside  (2000)
1526. Wolfiporia cocos : a potential agent for composting of bioprocessing Douglas-fir wood treated with copper-based preservatives  (1998)
1527. Protecting wood fences for yard and garden  ()
1528. Preservative-treated wood for foundations  (1981)
1529. An experimental method to simulate incipient decay of wood basidiomycete fungi  (2000)
1530. Evaluation of white-rot fungal growth on southern yellow pine wood chips pretreated with blue-stain fungi  (2000)
1531. Treatability of U.S. wood species with pigment emulsified creosote  (2000)
1532. Ten-year performance of treated northeastern softwoods in aboveground and ground-contact exposures  ()
1533. Evaluation of new creosote formulations after extended exposures in fungal cellar tests and field plot tests  (2000)
1534. Fire performance issues  (1997)
1535. Predicting the reactivity of adhesive starting materials  (1999)
1536. Dynamic fracture toughness of cellulose-fiber-reinforced polypropylene : preliminary investigation of microstructural effects  (1999)
1537. Properties of particleboard made from recycled CCA-treated wood  (2000)
1538. Particleboard made from remediated CCA-treated wood : evaluation of panel properties  (2001)
1539. Isolating metal-tolerant bacteria capable of removing copper, chromium, and arsenic from treated wood  (2000)
1540. Correlation between oxalic acid production and copper tolerance in Wolfiporia cocos  (2000)
1541. Bacterial associations with decaying wood : a review  (1996)
1542. Resorcinol-formaldehyde reactions in dilute solution observed by carbon-13 NMR spectroscopy  (2000)
1543. Injection molded composites from kenaf and recycled plastic  (1998)
1544. Dimensional stability and decay resistance of composite fiberboard made from plantation-grown southern yellow pine  (1999)
1545. Efficacy of pinosylvins against white-rot and brown-rot fungi  (1999)
1546. Vegetative anatomy and relationships of Setchellanthus caeruleus (Setchellanthaceae)  (1999)
1547. Decay of wood and wood-based products above ground in buildings  (1999)
1548. Performance of back-primed and factory-finished hardboard lap siding in southern Florida  ()
1549. Wood particleboard and flakeboard : types, grades, and uses  (1986)
1550. Flake storage effects on properties of laboratory-made flakeboards  (1998)
1551. Mildew and mildew control for wood surfaces  (1999)
1552. Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate  ()
1553. Compatibility of pressure sensitive adhesives with recycling unit operations  (1999)
1554. A raman microprobe investigation of the molecular architecture of loblolly pine tracheids  (1999)
1555. The Aging of lignin rich papers upon exposure to light : its quantification and prediction  (1999)
1556. Forest Products Laboratory natural finish  (1979)
1557. Properties of seven Colombian woods  (1981)
1558. Mechanical Properties of 23 Species of Eastern Hardwoods. (1975)
1559. Reliability formulation for the strength and fire endurance of glued-laminated beams  ()
1560. Biomechanical pulping with Phlebiopsis gigantea reduced energy consumption and increased paper strength : [summary]  (2000)
1561. Distribution and dispersal of Xylaria endophytes in two tree species in Puerto Rico  (1998)
1562. Aldehyde emissions from particleboard and medium density fiberboard products  (2000)
1563. Alboleptonia from the Greater Antilles  (1998)
1564. Role of wood production in ecosystem management : proceedings of the Sustainable Forestry Working Group at the IUFRO All Division 5 conference, Pullman, Washington, July 1997  (1997)
1565. Incompatibility groups among North American populations Laetiporus sulphureus sensu lato  (2000)
1566. Assessment of compatibility among Armillaria cepistipes, A. sinapina, and North American biological species X and XI, using culture morphology and molecular biology  (1998)
1567. Achievements in the utilzation of poplar wood : guideposts for the future : [abstract]  (2000)
1568. The structures of native celluloses, and the origin of their variability  (1999)
1569. Recent advances in polyoxometalate based delignification  (1999)
1570. The individual structures of native celluloses  (1999)
1571. National forests of Wisconsin : demographics and recreation participation  ()
1572. Softwoods of North America  (1997)
1573. Hardwoods of North America  (1995)
1574. Biomechanical pulping : a mill-scale evaluation  (1999)
1575. Kraft pulping of industrial wood waste  (1998)
1576. On the importance of hydroquinone/p-quinone redox system in the photoyellowing of mechanical pulps  (1999)
1577. An FT-raman study of softwood, hardwood, and chemically modified black spruce MWLS  (1999)
1578. Recycling evaluation of new-generation environmentally benign pressure sensitive adhesives  (1999)
1579. Innovative approach to solving "stickies" problem and developing environmentally benign pressure sensitive adhesives through partnerships  (1999)
1580. Data for prediction of mechanical properties of aspen flakeboards  (1983)
1581. In-service moisture content of hardboard lap siding in southern Florida  (1999)
1582. Hygrophoraceae (Agaricales) of the Greater Antilles : Hygrocybe subgenus Pseudohygrocybe section Firmae  (2001)
1583. Static and vibration moduli of elasticity of salvaged and new joists  (2000)
1584. Pilot study to examine use of transverse vibration nondestructive evaluation for assessing floor systems  (2002)
1585. Light-Frame Wall Systems: Performance and Predictability. (1983)
1586. FPL designs meet family housing needs (1972)
1587. Development of an improved system of wood-frame house construction (1965)
1588. Nondestructive Methods for Detecting Defects in Softwood Logs (1996)